[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c115735a-d909-4185-82a5-6bcb797f6a60@lunn.ch>
Date: Mon, 4 Mar 2024 14:43:56 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Romain Gantois <romain.gantois@...tlin.com>
Cc: Russell King <linux@...linux.org.uk>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Clément Léger <clement.leger@...tlin.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
linux-renesas-soc@...r.kernel.org,
Clark Wang <xiaoning.wang@....com>
Subject: Re: [PATCH net-next v5 5/7] net: stmmac: Signal to PHY/PCS drivers
to keep RX clock on
On Fri, Mar 01, 2024 at 04:35:02PM +0100, Romain Gantois wrote:
> There is a reocurring issue with stmmac controllers where the MAC fails to
> initialize its hardware if an RX clock signal isn't provided on the MAC/PHY
> link.
>
> This causes issues when PHY or PCS devices either go into suspend while
> cutting the RX clock or do not bring the clock signal up early enough for
> the MAC to initialize successfully.
>
> Set the mac_requires_rxc flag in the stmmac phylink config so that PHY/PCS
> drivers know to keep the RX clock up at all times.
>
> Reported-by: Clark Wang <xiaoning.wang@....com>
> Link: https://lore.kernel.org/all/20230202081559.3553637-1-xiaoning.wang@nxp.com/
> Reported-by: Clément Léger <clement.leger@...tlin.com>
> Link: https://lore.kernel.org/linux-arm-kernel/20230116103926.276869-4-clement.leger@bootlin.com/
> Suggested-by: Russell King <linux@...linux.org.uk>
> Signed-off-by: Romain Gantois <romain.gantois@...tlin.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Andrew
Powered by blists - more mailing lists