[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZeXbnmxoFWoWnq+s@shell.armlinux.org.uk>
Date: Mon, 4 Mar 2024 14:33:02 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Romain Gantois <romain.gantois@...tlin.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Clément Léger <clement.leger@...tlin.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
linux-renesas-soc@...r.kernel.org
Subject: Re: [PATCH net-next v5 2/7] net: phylink: add rxc_always_on flag to
phylink_pcs
On Fri, Mar 01, 2024 at 04:34:59PM +0100, Romain Gantois wrote:
> Some MAC drivers (e.g. stmmac) require a continuous receive clock signal to
> be generated by a PCS that is handled by a standalone PCS driver.
>
> Such a PCS driver does not have access to a PHY device, thus cannot check
> the PHY_F_RXC_ALWAYS_ON flag. They cannot check max_requires_rxc in the
> phylink config either, since it is a private member. Therefore, a new flag
> is needed to signal to the PCS that it should keep the RX clock signal up
> at all times.
>
> Suggested-by: Russell King <linux@...linux.org.uk>
Given that this contains some of my code, this is slightly more than
"suggested by", it's probably more accurately co-developed-by.
All the same comments apply to this attributation as the sign-off in
patch 1.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists