| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-7-4f42c347b653@kernel.org>
Date: Fri, 08 Mar 2024 23:10:14 +0100
From: "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
To: mptcp@...ts.linux.dev, Mat Martineau <martineau@...nel.org>,
Geliang Tang <geliang@...nel.org>, Geliang Tang <tanggeliang@...inos.cn>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Shuah Khan <shuah@...nel.org>
Cc: netdev@...r.kernel.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org, "Matthieu Baerts (NGI0)" <matttbe@...nel.org>
Subject: [PATCH net-next 07/15] selftests: mptcp: print test results with
counters
From: Geliang Tang <tanggeliang@...inos.cn>
This patch adds a new helper mptcp_lib_print_title(), a wrapper of
mptcp_lib_inc_test_counter() and mptcp_lib_pr_title_counter(), to
print out test counter in each test result and increase the counter.
Use this helper to print out test counters for every tests in diag.sh,
mptcp_connect.sh, mptcp_sockopt.sh, pm_netlink.sh, simult_flows.sh,
and userspace_pm.sh.
diag.sh:
01 no msk on netns creation [ ok ]
02 listen match for dport 10000 [ ok ]
03 listen match for sport 10000 [ ok ]
04 listen match for saddr and sport [ ok ]
05 all listen sockets [ ok ]
mptcp_connect.sh:
01 New MPTCP socket can be blocked via sysctl [ OK ]
02 Validating network environment with pings [ OK ]
INFO: Using loss of 0.85% delay 31 ms reorder .. with delay 7ms on ns3eth4
03 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 69ms) [ OK ]
04 ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 20ms) [ OK ]
05 ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 16ms) [ OK ]
mptcp_sockopt.sh:
01 Transfer v4 [ OK ]
02 Mark v4 [ OK ]
03 Transfer v6 [ OK ]
04 Mark v6 [ OK ]
05 SOL_MPTCP sockopt v4 [ OK ]
pm_netlink.sh:
01 defaults addr list [ OK ]
02 simple add/get addr [ OK ]
03 dump addrs [ OK ]
04 simple del addr [ OK ]
05 dump addrs after del [ OK ]
simult_flows.sh:
01 balanced bwidth 7391 max 8456 [ OK ]
02 balanced bwidth - reverse direction 7403 max 8456 [ OK ]
03 balanced bwidth with unbalanced delay 7429 max 8456 [ OK ]
04 balanced bwidth with unbalanced delay - reverse ... 7485 max 8456 [ OK ]
05 unbalanced bwidth 7549 max 8456 [ OK ]
userspace_pm.sh:
01 Created network namespaces ns1, ns2 [ OK ]
INFO: Make connections
02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
INFO: Announce tests
04 ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [ OK ]
05 ADD_ADDR id:67 10.0.2.2 (ns2) => ns1, reuse port [ OK ]
Having test counters helps to quickly identify issues when looking at a
long list of output logs and results.
Signed-off-by: Geliang Tang <tanggeliang@...inos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@...nel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@...nel.org>
---
tools/testing/selftests/net/mptcp/diag.sh | 6 ++----
tools/testing/selftests/net/mptcp/mptcp_connect.sh | 6 +++---
tools/testing/selftests/net/mptcp/mptcp_sockopt.sh | 2 +-
tools/testing/selftests/net/mptcp/pm_netlink.sh | 5 +++--
tools/testing/selftests/net/mptcp/simult_flows.sh | 7 ++++---
tools/testing/selftests/net/mptcp/userspace_pm.sh | 4 +++-
6 files changed, 16 insertions(+), 14 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index b63510ce2327..4ffdd415e670 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -54,7 +54,7 @@ __chk_nr()
nr=$(eval $command)
- printf "%-50s" "$msg"
+ mptcp_lib_print_title "$msg"
if [ "$nr" != "$expected" ]; then
if [ "$nr" = "$skip" ] && ! mptcp_lib_expect_all_features; then
echo "[ skip ] Feature probably not supported"
@@ -68,7 +68,6 @@ __chk_nr()
echo "[ ok ]"
mptcp_lib_result_pass "${msg}"
fi
- MPTCP_LIB_TEST_COUNTER=$((MPTCP_LIB_TEST_COUNTER+1))
}
__chk_msk_nr()
@@ -113,7 +112,7 @@ wait_msk_nr()
sleep 1
done
- printf "%-50s" "$msg"
+ mptcp_lib_print_title "$msg"
if [ $i -ge $timeout ]; then
echo "[ fail ] timeout while expecting $expected max $max last $nr"
mptcp_lib_result_fail "${msg} # timeout"
@@ -126,7 +125,6 @@ wait_msk_nr()
echo "[ ok ]"
mptcp_lib_result_pass "${msg}"
fi
- MPTCP_LIB_TEST_COUNTER=$((MPTCP_LIB_TEST_COUNTER+1))
}
chk_msk_fallback_nr()
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index 915faee77e25..bbda37d6514f 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -249,7 +249,8 @@ fi
print_larger_title() {
# here we don't have the time, a bit longer for the alignment
- printf "%-69s" "${@}"
+ MPTCP_LIB_TEST_FORMAT="%02u %-69s" \
+ mptcp_lib_print_title "${@}"
}
check_mptcp_disabled()
@@ -320,7 +321,6 @@ do_transfer()
local extra_args="$7"
port=$((port + 1))
- MPTCP_LIB_TEST_COUNTER=$((MPTCP_LIB_TEST_COUNTER+1))
if [ "$rcvbuf" -gt 0 ]; then
extra_args="$extra_args -R $rcvbuf"
@@ -347,7 +347,7 @@ do_transfer()
addr_port=$(printf "%s:%d" ${connect_addr} ${port})
local result_msg
result_msg="$(printf "%.3s %-5s -> %.3s (%-20s) %-5s" ${connector_ns} ${cl_proto} ${listener_ns} ${addr_port} ${srv_proto})"
- printf "%-50s" "${result_msg}"
+ mptcp_lib_print_title "${result_msg}"
if $capture; then
local capuser
diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
index 17b36c1312f4..19d0ac31b6a9 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.sh
@@ -115,7 +115,7 @@ check_mark()
print_title()
{
- printf "%-50s" "${@}"
+ mptcp_lib_print_title "${@}"
}
do_transfer()
diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh
index 427fc5c70b3c..5b9bc25dfef4 100755
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh
+++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh
@@ -53,7 +53,7 @@ check()
local msg="$3"
local rc=0
- printf "%-50s" "$msg"
+ mptcp_lib_print_title "$msg"
mptcp_lib_check_output "${err}" "${cmd}" "${expected}" || rc=${?}
if [ ${rc} -eq 2 ]; then
mptcp_lib_result_fail "${msg} # error ${rc}"
@@ -189,7 +189,8 @@ subflow,backup,fullmesh 10.0.1.1" " (backup,fullmesh)"
else
for st in fullmesh nofullmesh backup,fullmesh; do
st=" (${st})"
- printf "%-50s%s\n" "${st}" "[SKIP]"
+ mptcp_lib_print_title "${st}"
+ echo "[SKIP]"
mptcp_lib_result_skip "${st}"
done
fi
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
index 3ad663e38c42..b7549d9364d6 100755
--- a/tools/testing/selftests/net/mptcp/simult_flows.sh
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -14,6 +14,8 @@ ns3=""
capture=false
timeout_poll=30
timeout_test=$((timeout_poll * 2 + 1))
+# a bit more space: because we have more to display
+MPTCP_LIB_TEST_FORMAT="%02u %-60s"
ret=0
bail=0
slack=50
@@ -126,7 +128,6 @@ do_transfer()
local max_time=$3
local port
port=$((10000+MPTCP_LIB_TEST_COUNTER))
- MPTCP_LIB_TEST_COUNTER=$((MPTCP_LIB_TEST_COUNTER+1))
:> "$cout"
:> "$sout"
@@ -238,7 +239,7 @@ run_test()
# completion (see mptcp_connect): 200ms on each side, add some slack
time=$((time + 400 + slack))
- printf "%-60s" "$msg"
+ mptcp_lib_print_title "$msg"
do_transfer $small $large $time
lret=$?
mptcp_lib_result_code "${lret}" "${msg}"
@@ -248,7 +249,7 @@ run_test()
fi
msg+=" - reverse direction"
- printf "%-60s" "${msg}"
+ mptcp_lib_print_title "${msg}"
do_transfer $large $small $time
lret=$?
mptcp_lib_result_code "${lret}" "${msg}"
diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh
index b0cce8f065d8..ca238592baee 100755
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh
+++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh
@@ -54,6 +54,8 @@ ns1=""
ns2=""
ret=0
test_name=""
+# a bit more space: because we have more to display
+MPTCP_LIB_TEST_FORMAT="%02u %-68s"
_printf() {
stdbuf -o0 -e0 printf "${@}"
@@ -69,7 +71,7 @@ print_test()
{
test_name="${1}"
- _printf "%-68s" "${test_name}"
+ mptcp_lib_print_title "${test_name}"
}
print_results()
--
2.43.0
Powered by blists - more mailing lists