netdev - Re: [PATCH net-next v8 11/11] net: stmmac: dwmac-loongson: Disable coe for some Loongson GNET

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <6ba83c5c-a993-4d79-86cf-789505a893ed@loongson.cn>
Date: Wed, 13 Mar 2024 17:52:29 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: Serge Semin <fancer.lancer@...il.com>
Cc: andrew@...n.ch, hkallweit1@...il.com, peppe.cavallaro@...com,
 alexandre.torgue@...s.st.com, joabreu@...opsys.com, Jose.Abreu@...opsys.com,
 chenhuacai@...ngson.cn, linux@...linux.org.uk, guyinggang@...ngson.cn,
 netdev@...r.kernel.org, chris.chenfeiyang@...il.com
Subject: Re: [PATCH net-next v8 11/11] net: stmmac: dwmac-loongson: Disable
 coe for some Loongson GNET


在 2024/2/6 06:18, Serge Semin 写道:
> On Tue, Jan 30, 2024 at 04:49:16PM +0800, Yanteng Si wrote:
>> Some chips of Loongson GNET does not support coe, so disable them.
> s/coe/Tx COE
OK.
>
>> Set dma_cap->tx_coe to 0 and overwrite get_hw_feature.
>>
>> Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
>> Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
>> Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
>> ---
>>   .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 46 +++++++++++++++++++
>>   1 file changed, 46 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>> index b78a73ea748b..8018d7d5f31b 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
>> @@ -196,6 +196,51 @@ static int dwlgmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
>>   	return ret;
>>   }
>>   
>> +static int dwlgmac_get_hw_feature(void __iomem *ioaddr,
> Please use GNET-specific prefix.
OK. loongson_gnet_get_hw_feature()
>
>> +				  struct dma_features *dma_cap)
>> +{
>> +	u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
>> +
>> +	if (!hw_cap) {
>> +		/* 0x00000000 is the value read on old hardware that does not
>> +		 * implement this register
>> +		 */
>> +		return -EOPNOTSUPP;
>> +	}
> This doesn't seems like possible. All your devices have the
> HW-features register. If so please drop.
OK, drop it.
>
>> +
>> +	dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
>> +	dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
>> +	dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
>> +	dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
>> +	dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
>> +	dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
>> +	dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
>> +	dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
>> +	dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
>> +	/* MMC */
>> +	dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
>> +	/* IEEE 1588-2002 */
>> +	dma_cap->time_stamp =
>> +	    (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
>> +	/* IEEE 1588-2008 */
>> +	dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
>> +	/* 802.3az - Energy-Efficient Ethernet (EEE) */
>> +	dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
>> +	dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
>> +	/* TX and RX csum */
>> +	dma_cap->tx_coe = 0;
>> +	dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
>> +	dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
>> +	dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
>> +	/* TX and RX number of channels */
>> +	dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
>> +	dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
>> +	/* Alternate (enhanced) DESC mode */
>> +	dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
> I am not sure whether you need to parse the capability register at all
> seeing this is a GNET-specific method. For that device all the
> capabilities are already known and can be just initialized in this
> method.
-dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;

+dma_cap->tx_coe = 0;

I'm a little confused. Actually, I only modified this line, which is 
used to fix the checksum.

2k2000  of Loongson GNET does not support coe.


Thanks,
Yanteng

>
> -Serge(y)
>
>> +
>> +	return 0;
>> +}
>> +
>>   struct stmmac_pci_info {
>>   	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
>>   	int (*config)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat,
>> @@ -542,6 +587,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev,
>>   		ld->dwlgmac_dma_ops = dwmac1000_dma_ops;
>>   		ld->dwlgmac_dma_ops.init_chan = dwlgmac_dma_init_channel;
>>   		ld->dwlgmac_dma_ops.dma_interrupt = dwlgmac_dma_interrupt;
>> +		ld->dwlgmac_dma_ops.get_hw_feature = dwlgmac_get_hw_feature;
>>   
>>   		plat->setup = loongson_setup;
>>   		ret = loongson_dwmac_config_multi_msi(pdev, plat, &res, np, 8);
>> -- 
>> 2.31.4
>>