| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id:
<20240314-b4-for-net-mt7530-fix-link-local-vlan-v2-2-7dbcf6429ba0@arinc9.com>
Date: Thu, 14 Mar 2024 12:33:42 +0300
From: Arınç ÜNAL via B4 Relay
<devnull+arinc.unal.arinc9.com@...nel.org>
To: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: Frank Wunderlich <frank-w@...lic-files.de>,
Bartel Eerdekens <bartel.eerdekens@...stell8.be>, mithat.guner@...ont.com,
erkin.bozoglu@...ont.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH net v2 2/2] net: dsa: mt7530: fix handling of all
link-local frames
From: Arınç ÜNAL <arinc.unal@...nc9.com>
Currently, the MT753X switches treat frames with :01-0D and :0F MAC DAs as
regular multicast frames, therefore flooding them to user ports.
On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE
Std 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC
DA must only be propagated to C-VLAN and MAC Bridge components. That means
VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
these frames are supposed to be processed by the CPU (software). So we make
the switch only forward them to the CPU port. And if received from a CPU
port, forward to a single port. The software is responsible of making the
switch conform to the latter by setting a single port as destination port
on the special tag.
This switch intellectual property cannot conform to this part of the
standard fully. Whilst the REV_UN frame tag covers the remaining :04-0D and
:0F MAC DAs, it also includes :22-FF which the scope of propagation is not
supposed to be restricted for these MAC DAs.
Set frames with :01-03 MAC DAs to be trapped to the CPU port(s). Add a
comment for the remaining MAC DAs.
Note that the ingress port must have a PVID assigned to it for the switch
to forward untagged frames. A PVID is set by default on VLAN-aware and
VLAN-unaware ports. However, when the network interface that pertains to
the ingress port is attached to a vlan_filtering enabled bridge, the user
can remove the PVID assignment from it which would prevent the link-local
frames from being trapped to the CPU port. I am yet to see a way to forward
link-local frames while preventing other untagged frames from being
forwarded too.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
drivers/net/dsa/mt7530.c | 37 +++++++++++++++++++++++++++++++++----
drivers/net/dsa/mt7530.h | 13 +++++++++++++
2 files changed, 46 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index ac887e929c79..0d3d328f757a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -950,6 +950,21 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
mutex_unlock(&priv->reg_mutex);
}
+/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
+ * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
+ * must only be propagated to C-VLAN and MAC Bridge components. That means
+ * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
+ * these frames are supposed to be processed by the CPU (software). So we make
+ * the switch only forward them to the CPU port. And if received from a CPU
+ * port, forward to a single port. The software is responsible of making the
+ * switch conform to the latter by setting a single port as destination port on
+ * the special tag.
+ *
+ * This switch intellectual property cannot conform to this part of the standard
+ * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
+ * DAs, it also includes :22-FF which the scope of propagation is not supposed
+ * to be restricted for these MAC DAs.
+ */
static void
mt753x_trap_frames(struct mt7530_priv *priv)
{
@@ -964,13 +979,27 @@ mt753x_trap_frames(struct mt7530_priv *priv)
MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
MT753X_BPDU_CPU_ONLY);
- /* Trap LLDP frames with :0E MAC DA to the CPU port(s) and egress them
- * VLAN-untagged.
+ /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+ mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
+ MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
+ MT753X_R01_PORT_FW_MASK,
+ MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+ MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+ MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+ MT753X_BPDU_CPU_ONLY);
+
+ /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
*/
mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
- MT753X_R0E_PORT_FW_MASK,
+ MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
+ MT753X_R03_PORT_FW_MASK,
MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY));
+ MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+ MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+ MT753X_BPDU_CPU_ONLY);
}
static void
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 5566c905a415..d17b318e6ee4 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -73,12 +73,25 @@ enum mt753x_id {
#define MT753X_BPDU_EG_TAG(x) FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0)
+/* Register for :01 and :02 MAC DA frame control */
+#define MT753X_RGAC1 0x28
+#define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
+#define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
+#define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
+#define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
+#define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
+#define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
+#define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
+
/* Register for :03 and :0E MAC DA frame control */
#define MT753X_RGAC2 0x2c
#define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
#define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
#define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
#define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
+#define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
+#define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
+#define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
enum mt753x_bpdu_port_fw {
MT753X_BPDU_FOLLOW_MFC,
--
2.40.1
Powered by blists - more mailing lists