[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240326110709.26165-8-diogo.ivo@siemens.com>
Date: Tue, 26 Mar 2024 11:06:57 +0000
From: Diogo Ivo <diogo.ivo@...mens.com>
To: danishanwar@...com,
rogerq@...nel.org,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
andrew@...n.ch,
hkallweit1@...il.com,
linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org
Cc: Diogo Ivo <diogo.ivo@...mens.com>,
jan.kiszka@...mens.com
Subject: [PATCH net-next v5 07/10] net: ti: icssg-prueth: Adjust the number of TX channels for SR1.0
As SR1.0 uses the current higher priority channel to send commands to
the firmware, take this into account when setting/getting the number
of channels to/from the user.
Based on the work of Roger Quadros in TI's 5.10 SDK [1].
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
Co-developed-by: Jan Kiszka <jan.kiszka@...mens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@...mens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@...mens.com>
Reviewed-by: Roger Quadros <rogerq@...nel.org>
Reviewed-by: MD Danish Anwar <danishanwar@...com>
---
Changes in v5:
- Restrict number of TX channels to 1 to avoid timeouts
- Added Reviewed-by tag from Danish
Changes in v4:
- Add Reviewed-by from Roger
Changes in v3:
- Address Roger's comments on SR1.0 handling
drivers/net/ethernet/ti/icssg/icssg_ethtool.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_ethtool.c b/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
index 9a7dd7efcf69..ca20325d4d3e 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_ethtool.c
@@ -142,6 +142,9 @@ static int emac_set_channels(struct net_device *ndev,
emac->tx_ch_num = ch->tx_count;
+ if (emac->is_sr1)
+ emac->tx_ch_num++;
+
return 0;
}
@@ -152,8 +155,17 @@ static void emac_get_channels(struct net_device *ndev,
ch->max_rx = 1;
ch->max_tx = PRUETH_MAX_TX_QUEUES;
+
+ /* Disable multiple TX channels due to timeouts
+ * when using more than one queue */
+ if (emac->is_sr1)
+ ch->max_tx = 1;
+
ch->rx_count = 1;
ch->tx_count = emac->tx_ch_num;
+
+ if (emac->is_sr1)
+ ch->tx_count--;
}
static const struct ethtool_rmon_hist_range emac_rmon_ranges[] = {
--
2.44.0
Powered by blists - more mailing lists