netdev - [PATCH RESEND net-next v6 7/7] net: pcs: rzn1-miic: Init RX clock early if MAC requires it

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240326-rxc_bugfix-v6-7-24a74e5c761f@bootlin.com>
Date: Tue, 26 Mar 2024 14:32:13 +0100
From: Romain Gantois <romain.gantois@...tlin.com>
To: Russell King <linux@...linux.org.uk>, Andrew Lunn <andrew@...n.ch>, 
 Heiner Kallweit <hkallweit1@...il.com>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Alexandre Torgue <alexandre.torgue@...s.st.com>, 
 Jose Abreu <joabreu@...opsys.com>, 
 Maxime Coquelin <mcoquelin.stm32@...il.com>, 
 Clément Léger <clement.leger@...tlin.com>
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>, 
 Miquel Raynal <miquel.raynal@...tlin.com>, 
 Thomas Petazzoni <thomas.petazzoni@...tlin.com>, netdev@...r.kernel.org, 
 linux-stm32@...md-mailman.stormreply.com, 
 linux-arm-kernel@...ts.infradead.org, linux-renesas-soc@...r.kernel.org, 
 Romain Gantois <romain.gantois@...tlin.com>
Subject: [PATCH RESEND net-next v6 7/7] net: pcs: rzn1-miic: Init RX clock
 early if MAC requires it

The GMAC1 controller in the RZN1 IP requires the RX MII clock signal to be
started before it initializes its own hardware, thus before it calls
phylink_start.

Implement the pcs_pre_init() callback so that the RX clock signal can be
enabled early if necessary.

Reported-by: Clément Léger <clement.leger@...tlin.com>
Link: https://lore.kernel.org/linux-arm-kernel/20230116103926.276869-4-clement.leger@bootlin.com/
Signed-off-by: Romain Gantois <romain.gantois@...tlin.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
 drivers/net/pcs/pcs-rzn1-miic.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
index 4bd66fdde367..d0a722d43368 100644
--- a/drivers/net/pcs/pcs-rzn1-miic.c
+++ b/drivers/net/pcs/pcs-rzn1-miic.c
@@ -279,10 +279,38 @@ static int miic_validate(struct phylink_pcs *pcs, unsigned long *supported,
 	return -EINVAL;
 }

+static int miic_pre_init(struct phylink_pcs *pcs)
+{
+	struct miic_port *miic_port = phylink_pcs_to_miic_port(pcs);
+	struct miic *miic = miic_port->miic;
+	u32 val, mask;
+
+	/* Start RX clock if required */
+	if (pcs->rxc_always_on) {
+		/* In MII through mode, the clock signals will be driven by the
+		 * external PHY, which might not be initialized yet. Set RMII
+		 * as default mode to ensure that a reference clock signal is
+		 * generated.
+		 */
+		miic_port->interface = PHY_INTERFACE_MODE_RMII;
+
+		val = FIELD_PREP(MIIC_CONVCTRL_CONV_MODE, CONV_MODE_RMII) |
+		      FIELD_PREP(MIIC_CONVCTRL_CONV_SPEED, CONV_MODE_100MBPS);
+		mask = MIIC_CONVCTRL_CONV_MODE | MIIC_CONVCTRL_CONV_SPEED;
+
+		miic_reg_rmw(miic, MIIC_CONVCTRL(miic_port->port), mask, val);
+
+		miic_converter_enable(miic, miic_port->port, 1);
+	}
+
+	return 0;
+}
+
 static const struct phylink_pcs_ops miic_phylink_ops = {
 	.pcs_validate = miic_validate,
 	.pcs_config = miic_config,
 	.pcs_link_up = miic_link_up,
+	.pcs_pre_init = miic_pre_init,
 };

 struct phylink_pcs *miic_create(struct device *dev, struct device_node *np)

-- 
2.44.0