| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240328093405.336378-26-karol.kolacinski@intel.com>
Date: Thu, 28 Mar 2024 10:25:30 +0100
From: Karol Kolacinski <karol.kolacinski@...el.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: netdev@...r.kernel.org,
anthony.l.nguyen@...el.com,
jesse.brandeburg@...el.com,
Grzegorz Nitka <grzegorz.nitka@...el.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
Karol Kolacinski <karol.kolacinski@...el.com>
Subject: [PATCH v2 iwl-next 12/12] ice: Adjust PTP init for 2x50G E825C devices
From: Grzegorz Nitka <grzegorz.nitka@...el.com>
>From FW/HW perspective, 2 port topology in E825C devices requires
merging of 2 port mapping internally to CPK and breakout mapping
externally to CPK. As a consequence, it requires different port
numbering from PTP code perspective.
For that topology, pf_id can not be used to index PTP ports. Even if
the 2nd port is identified as port with pf_id = 1, all PHY operations
need to be performed as it was port 2. Thus, special mapping is needed
for the 2nd port.
This change adds detection of 2x50G topology and applies 'custom'
mapping on the 2nd port.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@...el.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@...el.com>
---
.../net/ethernet/intel/ice/ice_hw_autogen.h | 4 ++++
drivers/net/ethernet/intel/ice/ice_ptp.c | 5 ++++
drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 23 +++++++++++++++++++
drivers/net/ethernet/intel/ice/ice_type.h | 9 ++++++++
4 files changed, 41 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
index cfac1d432c15..26260eed852d 100644
--- a/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
+++ b/drivers/net/ethernet/intel/ice/ice_hw_autogen.h
@@ -157,6 +157,8 @@
#define GLGEN_RTRIG_CORER_M BIT(0)
#define GLGEN_RTRIG_GLOBR_M BIT(1)
#define GLGEN_STAT 0x000B612C
+#define GLGEN_SWITCH_MODE_CONFIG 0x000B81E0
+#define GLGEN_SWITCH_MODE_CONFIG_SELECT_25X4_ON_SINGLE_QUAD_M BIT(2)
#define GLGEN_VFLRSTAT(_i) (0x00093A04 + ((_i) * 4))
#define PFGEN_CTRL 0x00091000
#define PFGEN_CTRL_PFSWR_M BIT(0)
@@ -177,6 +179,8 @@
#define GLINT_CTL_ITR_GRAN_50_M ICE_M(0xF, 24)
#define GLINT_CTL_ITR_GRAN_25_S 28
#define GLINT_CTL_ITR_GRAN_25_M ICE_M(0xF, 28)
+#define GLGEN_MAC_LINK_TOPO 0x000B81DC
+#define GLGEN_MAC_LINK_TOPO_LINK_TOPO_M GENMASK(1, 0)
#define GLINT_DYN_CTL(_INT) (0x00160000 + ((_INT) * 4))
#define GLINT_DYN_CTL_INTENA_M BIT(0)
#define GLINT_DYN_CTL_CLEARPBA_M BIT(1)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index 811830eab385..73898aa08dc5 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -1472,6 +1472,8 @@ void ice_ptp_link_change(struct ice_pf *pf, u8 port, bool linkup)
return;
ptp_port = &pf->ptp.port;
+ if (ice_is_e825c(hw) && hw->ptp.is_2x50g_muxed_topo)
+ port *= 2;
if (WARN_ON_ONCE(ptp_port->port_num != port))
return;
@@ -3329,6 +3331,9 @@ void ice_ptp_init(struct ice_pf *pf)
}
ptp->port.port_num = hw->pf_id;
+ if (ice_is_e825c(hw) && hw->ptp.is_2x50g_muxed_topo)
+ ptp->port.port_num = hw->pf_id * 2;
+
err = ice_ptp_init_port(pf, &ptp->port);
if (err)
goto err;
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index c64e66ceab40..34c9a9489708 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -2466,6 +2466,27 @@ static int ice_get_phy_tx_tstamp_ready_eth56g(struct ice_hw *hw, u8 port,
return 0;
}
+/**
+ * ice_is_muxed_topo - detect breakout 2x50G topology for E825C
+ * @hw: pointer to the HW struct
+ *
+ * Returns: true if it's 2x50 breakout topology, false otherwise
+ */
+static bool ice_is_muxed_topo(struct ice_hw *hw)
+{
+ u8 link_topo;
+ bool mux;
+ u32 val;
+
+ val = rd32(hw, GLGEN_SWITCH_MODE_CONFIG);
+ mux = FIELD_GET(GLGEN_SWITCH_MODE_CONFIG_SELECT_25X4_ON_SINGLE_QUAD_M,
+ val);
+ val = rd32(hw, GLGEN_MAC_LINK_TOPO);
+ link_topo = FIELD_GET(GLGEN_MAC_LINK_TOPO_LINK_TOPO_M, val);
+
+ return (mux && link_topo == ICE_LINK_TOPO_UP_TO_2_LINKS);
+}
+
/**
* ice_ptp_init_phy_e825c - initialize PHY parameters
* @hw: pointer to the HW struct
@@ -2498,6 +2519,8 @@ static void ice_ptp_init_phy_e825c(struct ice_hw *hw)
return;
}
}
+
+ ptp->is_2x50g_muxed_topo = ice_is_muxed_topo(hw);
}
/* E822 family functions
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index e019dad56819..c5b2ad113d1a 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -851,6 +851,14 @@ enum ice_phy_model {
ICE_PHY_ETH56G,
};
+/* Global Link Topology */
+enum ice_global_link_topo {
+ ICE_LINK_TOPO_UP_TO_2_LINKS,
+ ICE_LINK_TOPO_UP_TO_4_LINKS,
+ ICE_LINK_TOPO_UP_TO_8_LINKS,
+ ICE_LINK_TOPO_RESERVED,
+};
+
struct ice_ptp_hw {
enum ice_phy_model phy_model;
union ice_phy_params phy;
@@ -858,6 +866,7 @@ struct ice_ptp_hw {
u8 ports_per_phy;
bool primary_nac;
struct ice_hw *primary_hw;
+ bool is_2x50g_muxed_topo;
};
/* Port hardware description */
--
2.43.0
Powered by blists - more mailing lists