| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240329161730.47777-21-karol.kolacinski@intel.com>
Date: Fri, 29 Mar 2024 17:09:46 +0100
From: Karol Kolacinski <karol.kolacinski@...el.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: netdev@...r.kernel.org,
anthony.l.nguyen@...el.com,
jesse.brandeburg@...el.com,
Sergey Temerkhanov <sergey.temerkhanov@...el.com>,
Jacob Keller <jacob.e.keller@...el.com>,
Michal Michalik <michal.michalik@...el.com>,
Przemek Kitszel <przemyslaw.kitszel@...el.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
Karol Kolacinski <karol.kolacinski@...el.com>
Subject: [PATCH v4 iwl-next 07/12] ice: Introduce ETH56G PHY model for E825C products
From: Sergey Temerkhanov <sergey.temerkhanov@...el.com>
E825C products feature a new PHY model - ETH56G.
Introduces all necessary PHY definitions, functions etc. for ETH56G PHY,
analogous to E82X and E810 ones with addition of a few HW-specific
functionalities for ETH56G like one-step timestamping.
It ensures correct PTP initialization and operation for E825C products.
Co-developed-by: Jacob Keller <jacob.e.keller@...el.com>
Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Co-developed-by: Michal Michalik <michal.michalik@...el.com>
Signed-off-by: Michal Michalik <michal.michalik@...el.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@...el.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@...el.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@...el.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@...el.com>
---
V1 -> V4: Adjusted bitslip calculation
drivers/net/ethernet/intel/ice/ice_common.c | 3 +-
drivers/net/ethernet/intel/ice/ice_common.h | 1 +
drivers/net/ethernet/intel/ice/ice_ptp.c | 99 +-
drivers/net/ethernet/intel/ice/ice_ptp.h | 1 +
.../net/ethernet/intel/ice/ice_ptp_consts.h | 315 +++
drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 1882 +++++++++++++++--
drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 241 ++-
drivers/net/ethernet/intel/ice/ice_sbq_cmd.h | 10 +-
drivers/net/ethernet/intel/ice/ice_type.h | 20 +-
9 files changed, 2418 insertions(+), 154 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 885e253269a3..05d3ae59aa98 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -3059,8 +3059,7 @@ bool ice_is_100m_speed_supported(struct ice_hw *hw)
* If no bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned
* If more than one bit gets set, ICE_AQ_LINK_SPEED_UNKNOWN will be returned
*/
-static u16
-ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high)
+u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high)
{
u16 speed_phy_type_high = ICE_AQ_LINK_SPEED_UNKNOWN;
u16 speed_phy_type_low = ICE_AQ_LINK_SPEED_UNKNOWN;
diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h
index 70f57340eb0d..86cc1df469dd 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.h
+++ b/drivers/net/ethernet/intel/ice/ice_common.h
@@ -262,6 +262,7 @@ int
ice_aq_get_gpio(struct ice_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
bool *value, struct ice_sq_cd *cd);
bool ice_is_100m_speed_supported(struct ice_hw *hw);
+u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high);
int
ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size,
struct ice_sq_cd *cd);
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index cd2dab7b4c44..e2d4632d564c 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -1013,6 +1013,26 @@ ice_ptp_release_tx_tracker(struct ice_pf *pf, struct ice_ptp_tx *tx)
tx->len = 0;
}
+/**
+ * ice_ptp_init_tx_eth56g - Initialize tracking for Tx timestamps
+ * @pf: Board private structure
+ * @tx: the Tx tracking structure to initialize
+ * @port: the port this structure tracks
+ *
+ * Initialize the Tx timestamp tracker for this port. ETH56G PHYs
+ * have independent memory blocks for all ports.
+ */
+static int
+ice_ptp_init_tx_eth56g(struct ice_pf *pf, struct ice_ptp_tx *tx, u8 port)
+{
+ tx->block = port;
+ tx->offset = 0;
+ tx->len = INDEX_PER_PORT_ETH56G;
+ tx->has_ready_bitmap = 1;
+
+ return ice_ptp_alloc_tx_tracker(tx);
+}
+
/**
* ice_ptp_init_tx_e82x - Initialize tracking for Tx timestamps
* @pf: Board private structure
@@ -1343,10 +1363,19 @@ ice_ptp_port_phy_stop(struct ice_ptp_port *ptp_port)
mutex_lock(&ptp_port->ps_lock);
- kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
+ switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ err = ice_stop_phy_timer_eth56g(hw, port, true);
+ break;
+ case ICE_PHY_E82X:
+ kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
- err = ice_stop_phy_timer_e82x(hw, port, true);
- if (err)
+ err = ice_stop_phy_timer_e82x(hw, port, true);
+ break;
+ default:
+ err = -ENODEV;
+ }
+ if (err && err != -EBUSY)
dev_err(ice_pf_to_dev(pf), "PTP failed to set PHY port %d down, err %d\n",
port, err);
@@ -1380,27 +1409,39 @@ ice_ptp_port_phy_restart(struct ice_ptp_port *ptp_port)
mutex_lock(&ptp_port->ps_lock);
- kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
+ switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ err = ice_start_phy_timer_eth56g(hw, port);
+ break;
+ case ICE_PHY_E82X:
+ /* Start the PHY timer in Vernier mode */
+ kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
- /* temporarily disable Tx timestamps while calibrating PHY offset */
- spin_lock_irqsave(&ptp_port->tx.lock, flags);
- ptp_port->tx.calibrating = true;
- spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
- ptp_port->tx_fifo_busy_cnt = 0;
+ /* temporarily disable Tx timestamps while calibrating
+ * PHY offset
+ */
+ spin_lock_irqsave(&ptp_port->tx.lock, flags);
+ ptp_port->tx.calibrating = true;
+ spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
+ ptp_port->tx_fifo_busy_cnt = 0;
- /* Start the PHY timer in Vernier mode */
- err = ice_start_phy_timer_e82x(hw, port);
- if (err)
- goto out_unlock;
+ /* Start the PHY timer in Vernier mode */
+ err = ice_start_phy_timer_e82x(hw, port);
+ if (err)
+ break;
- /* Enable Tx timestamps right away */
- spin_lock_irqsave(&ptp_port->tx.lock, flags);
- ptp_port->tx.calibrating = false;
- spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
+ /* Enable Tx timestamps right away */
+ spin_lock_irqsave(&ptp_port->tx.lock, flags);
+ ptp_port->tx.calibrating = false;
+ spin_unlock_irqrestore(&ptp_port->tx.lock, flags);
- kthread_queue_delayed_work(pf->ptp.kworker, &ptp_port->ov_work, 0);
+ kthread_queue_delayed_work(pf->ptp.kworker, &ptp_port->ov_work,
+ 0);
+ break;
+ default:
+ err = -ENODEV;
+ }
-out_unlock:
if (err)
dev_err(ice_pf_to_dev(pf), "PTP failed to set PHY port %d up, err %d\n",
port, err);
@@ -1438,6 +1479,7 @@ void ice_ptp_link_change(struct ice_pf *pf, u8 port, bool linkup)
case ICE_PHY_E810:
/* Do not reconfigure E810 PHY */
return;
+ case ICE_PHY_ETH56G:
case ICE_PHY_E82X:
ice_ptp_port_phy_restart(ptp_port);
return;
@@ -1464,6 +1506,22 @@ static int ice_ptp_cfg_phy_interrupt(struct ice_pf *pf, bool ena, u32 threshold)
ice_ptp_reset_ts_memory(hw);
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G: {
+ int port;
+
+ for (port = 0; port < hw->ptp.num_lports; port++) {
+ int err;
+
+ err = ice_phy_cfg_intr_eth56g(hw, port, ena, threshold);
+ if (err) {
+ dev_err(dev, "Failed to configure PHY interrupt for port %d, err %d\n",
+ port, err);
+ return err;
+ }
+ }
+
+ return 0;
+ }
case ICE_PHY_E82X: {
int quad;
@@ -3074,6 +3132,9 @@ static int ice_ptp_init_port(struct ice_pf *pf, struct ice_ptp_port *ptp_port)
mutex_init(&ptp_port->ps_lock);
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ice_ptp_init_tx_eth56g(pf, &ptp_port->tx,
+ ptp_port->port_num);
case ICE_PHY_E810:
return ice_ptp_init_tx_e810(pf, &ptp_port->tx);
case ICE_PHY_E82X:
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.h b/drivers/net/ethernet/intel/ice/ice_ptp.h
index 3af20025043a..e0c23aaedc12 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.h
@@ -153,6 +153,7 @@ struct ice_ptp_tx {
#define INDEX_PER_QUAD 64
#define INDEX_PER_PORT_E82X 16
#define INDEX_PER_PORT_E810 64
+#define INDEX_PER_PORT_ETH56G 64
/**
* struct ice_ptp_port - data used to initialize an external port for PTP
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
index 2c4dab0c48ab..ef180936f60c 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
@@ -9,6 +9,321 @@
*/
/* Constants defined for the PTP 1588 clock hardware. */
+const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES] = {
+ /* ETH56G_PHY_REG_PTP */
+ {
+ /* base_addr */
+ {
+ 0x092000,
+ 0x126000,
+ 0x1BA000,
+ 0x24E000,
+ 0x2E2000,
+ },
+ /* step */
+ 0x98,
+ },
+ /* ETH56G_PHY_MEM_PTP */
+ {
+ /* base_addr */
+ {
+ 0x093000,
+ 0x127000,
+ 0x1BB000,
+ 0x24F000,
+ 0x2E3000,
+ },
+ /* step */
+ 0x200,
+ },
+ /* ETH56G_PHY_REG_XPCS */
+ {
+ /* base_addr */
+ {
+ 0x000000,
+ 0x009400,
+ 0x128000,
+ 0x1BC000,
+ 0x250000,
+ },
+ /* step */
+ 0x21000,
+ },
+ /* ETH56G_PHY_REG_MAC */
+ {
+ /* base_addr */
+ {
+ 0x085000,
+ 0x119000,
+ 0x1AD000,
+ 0x241000,
+ 0x2D5000,
+ },
+ /* step */
+ 0x1000,
+ },
+ /* ETH56G_PHY_REG_GPCS */
+ {
+ /* base_addr */
+ {
+ 0x084000,
+ 0x118000,
+ 0x1AC000,
+ 0x240000,
+ 0x2D4000,
+ },
+ /* step */
+ 0x400,
+ },
+};
+
+const
+struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD] = {
+ [ICE_ETH56G_LNK_SPD_1G] = {
+ .tx_mode = { .def = 6, },
+ .rx_mode = { .def = 6, },
+ .blks_per_clk = 1,
+ .blktime = 0x4000, /* 32 */
+ .tx_offset = {
+ .serdes = 0x6666, /* 51.2 */
+ .no_fec = 0xd066, /* 104.2 */
+ .sfd = 0x3000, /* 24 */
+ .onestep = 0x30000 /* 384 */
+ },
+ .rx_offset = {
+ .serdes = 0xffffc59a, /* -29.2 */
+ .no_fec = 0xffff0a80, /* -122.75 */
+ .sfd = 0x2c00, /* 22 */
+ .bs_ds = 0x19a /* 0.8 */
+ /* Dynamic bitslip 0 equals to 10 */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_2_5G] = {
+ .tx_mode = { .def = 6, },
+ .rx_mode = { .def = 6, },
+ .blks_per_clk = 1,
+ .blktime = 0x199a, /* 12.8 */
+ .tx_offset = {
+ .serdes = 0x28f6, /* 20.48 */
+ .no_fec = 0x53b8, /* 41.86 */
+ .sfd = 0x1333, /* 9.6 */
+ .onestep = 0x13333 /* 153.6 */
+ },
+ .rx_offset = {
+ .serdes = 0xffffe8a4, /* -11.68 */
+ .no_fec = 0xffff9a76, /* -50.77 */
+ .sfd = 0xf33, /* 7.6 */
+ .bs_ds = 0xa4 /* 0.32 */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_10G] = {
+ .tx_mode = { .def = 1, },
+ .rx_mode = { .def = 1, },
+ .blks_per_clk = 1,
+ .blktime = 0x666, /* 3.2 */
+ .tx_offset = {
+ .serdes = 0x234c, /* 17.6484848 */
+ .no_fec = 0x8e80, /* 71.25 */
+ .fc = 0xb4a4, /* 90.32 */
+ .sfd = 0x4a4, /* 2.32 */
+ .onestep = 0x4ccd /* 38.4 */
+ },
+ .rx_offset = {
+ .serdes = 0xffffeb27, /* -10.42424 */
+ .no_fec = 0xffffcccd, /* -25.6 */
+ .fc = 0xfffe0014, /* -255.96 */
+ .sfd = 0x4a4, /* 2.32 */
+ .bs_ds = 0x32 /* 0.0969697 */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_25G] = {
+ .tx_mode = {
+ .def = 1,
+ .rs = 4
+ },
+ .tx_mk_dly = 4,
+ .tx_cw_dly = {
+ .def = 1,
+ .onestep = 6
+ },
+ .rx_mode = {
+ .def = 1,
+ .rs = 4
+ },
+ .rx_mk_dly = {
+ .def = 1,
+ .rs = 1
+ },
+ .rx_cw_dly = {
+ .def = 1,
+ .rs = 1
+ },
+ .blks_per_clk = 1,
+ .blktime = 0x28f, /* 1.28 */
+ .mktime = 0x147b, /* 10.24, only if RS-FEC enabled */
+ .tx_offset = {
+ .serdes = 0xe1e, /* 7.0593939 */
+ .no_fec = 0x3857, /* 28.17 */
+ .fc = 0x48c3, /* 36.38 */
+ .rs = 0x8100, /* 64.5 */
+ .sfd = 0x1dc, /* 0.93 */
+ .onestep = 0x1eb8 /* 15.36 */
+ },
+ .rx_offset = {
+ .serdes = 0xfffff7a9, /* -4.1697 */
+ .no_fec = 0xffffe71a, /* -12.45 */
+ .fc = 0xfffe894d, /* -187.35 */
+ .rs = 0xfffff8cd, /* -3.6 */
+ .sfd = 0x1dc, /* 0.93 */
+ .bs_ds = 0x14 /* 0.0387879, RS-FEC 0 */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_40G] = {
+ .tx_mode = { .def = 3 },
+ .tx_mk_dly = 4,
+ .tx_cw_dly = {
+ .def = 1,
+ .onestep = 6
+ },
+ .rx_mode = { .def = 4 },
+ .rx_mk_dly = { .def = 1 },
+ .rx_cw_dly = { .def = 1 },
+ .blktime = 0x333, /* 1.6 */
+ .mktime = 0xccd, /* 6.4 */
+ .tx_offset = {
+ .serdes = 0x234c, /* 17.6484848 */
+ .no_fec = 0x5a8a, /* 45.27 */
+ .fc = 0x81b8, /* 64.86 */
+ .sfd = 0x4a4, /* 2.32 */
+ .onestep = 0x1333 /* 9.6 */
+ },
+ .rx_offset = {
+ .serdes = 0xffffeb27, /* -10.42424 */
+ .no_fec = 0xfffff594, /* -5.21 */
+ .fc = 0xfffe3080, /* -231.75 */
+ .sfd = 0x4a4, /* 2.32 */
+ .bs_ds = 0xccd /* 6.4 */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_50G] = {
+ .tx_mode = { .def = 5 },
+ .tx_mk_dly = 4,
+ .tx_cw_dly = {
+ .def = 1,
+ .onestep = 6
+ },
+ .rx_mode = { .def = 5 },
+ .rx_mk_dly = { .def = 1 },
+ .rx_cw_dly = { .def = 1 },
+ .blktime = 0x28f, /* 1.28 */
+ .mktime = 0xa3d, /* 5.12 */
+ .tx_offset = {
+ .serdes = 0x13ba, /* 9.86353 */
+ .rs = 0x5400, /* 42 */
+ .sfd = 0xe6, /* 0.45 */
+ .onestep = 0xf5c /* 7.68 */
+ },
+ .rx_offset = {
+ .serdes = 0xfffff7e8, /* -4.04706 */
+ .rs = 0xfffff994, /* -3.21 */
+ .sfd = 0xe6 /* 0.45 */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_50G2] = {
+ .tx_mode = {
+ .def = 3,
+ .rs = 2
+ },
+ .tx_mk_dly = 4,
+ .tx_cw_dly = {
+ .def = 1,
+ .onestep = 6
+ },
+ .rx_mode = {
+ .def = 4,
+ .rs = 1
+ },
+ .rx_mk_dly = { .def = 1 },
+ .rx_cw_dly = { .def = 1 },
+ .blktime = 0x28f, /* 1.28 */
+ .mktime = 0xa3d, /* 5.12 */
+ .tx_offset = {
+ .serdes = 0xe1e, /* 7.0593939 */
+ .no_fec = 0x3d33, /* 30.6 */
+ .rs = 0x5057, /* 40.17 */
+ .sfd = 0x1dc, /* 0.93 */
+ .onestep = 0xf5c /* 7.68 */
+ },
+ .rx_offset = {
+ .serdes = 0xfffff7a9, /* -4.1697 */
+ .no_fec = 0xfffff8cd, /* -3.6 */
+ .rs = 0xfffff21a, /* -6.95 */
+ .sfd = 0x1dc, /* 0.93 */
+ .bs_ds = 0xa3d /* 5.12, RS-FEC 0x633 (3.1) */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_100G] = {
+ .tx_mode = {
+ .def = 3,
+ .rs = 2
+ },
+ .tx_mk_dly = 10,
+ .tx_cw_dly = {
+ .def = 3,
+ .onestep = 6
+ },
+ .rx_mode = {
+ .def = 4,
+ .rs = 1
+ },
+ .rx_mk_dly = { .def = 5 },
+ .rx_cw_dly = { .def = 5 },
+ .blks_per_clk = 1,
+ .blktime = 0x148, /* 0.64 */
+ .mktime = 0x199a, /* 12.8 */
+ .tx_offset = {
+ .serdes = 0xe1e, /* 7.0593939 */
+ .no_fec = 0x67ec, /* 51.96 */
+ .rs = 0x44fb, /* 34.49 */
+ .sfd = 0x1dc, /* 0.93 */
+ .onestep = 0xf5c /* 7.68 */
+ },
+ .rx_offset = {
+ .serdes = 0xfffff7a9, /* -4.1697 */
+ .no_fec = 0xfffff5a9, /* -5.17 */
+ .rs = 0xfffff6e6, /* -4.55 */
+ .sfd = 0x1dc, /* 0.93 */
+ .bs_ds = 0x199a /* 12.8, RS-FEC 0x31b (1.552) */
+ }
+ },
+ [ICE_ETH56G_LNK_SPD_100G2] = {
+ .tx_mode = { .def = 5 },
+ .tx_mk_dly = 10,
+ .tx_cw_dly = {
+ .def = 3,
+ .onestep = 6
+ },
+ .rx_mode = { .def = 5 },
+ .rx_mk_dly = { .def = 5 },
+ .rx_cw_dly = { .def = 5 },
+ .blks_per_clk = 1,
+ .blktime = 0x148, /* 0.64 */
+ .mktime = 0x199a, /* 12.8 */
+ .tx_offset = {
+ .serdes = 0x13ba, /* 9.86353 */
+ .rs = 0x460a, /* 35.02 */
+ .sfd = 0xe6, /* 0.45 */
+ .onestep = 0xf5c /* 7.68 */
+ },
+ .rx_offset = {
+ .serdes = 0xfffff7e8, /* -4.04706 */
+ .rs = 0xfffff548, /* -5.36 */
+ .sfd = 0xe6, /* 0.45 */
+ .bs_ds = 0x303 /* 1.506 */
+ }
+ }
+};
+
/* struct ice_time_ref_info_e82x
*
* E822 hardware can use different sources as the reference for the PTP
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index be1613f069d5..ccf7d2946570 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -2,6 +2,7 @@
/* Copyright (C) 2021, Intel Corporation. */
#include <linux/delay.h>
+#include <linux/iopoll.h>
#include "ice_common.h"
#include "ice_ptp_hw.h"
#include "ice_ptp_consts.h"
@@ -636,6 +637,1635 @@ static void ice_ptp_exec_tmr_cmd(struct ice_hw *hw)
ice_flush(hw);
}
+/* 56G PHY device functions
+ *
+ * The following functions operate on devices with the ETH 56G PHY.
+ */
+
+/**
+ * ice_write_phy_eth56g - Write a PHY port register
+ * @hw: pointer to the HW struct
+ * @phy_idx: PHY index
+ * @addr: PHY register address
+ * @val: Value to write
+ */
+static int ice_write_phy_eth56g(struct ice_hw *hw, u8 phy_idx, u32 addr,
+ u32 val)
+{
+ struct ice_sbq_msg_input phy_msg;
+ int err;
+
+ phy_msg.opcode = ice_sbq_msg_wr;
+
+ phy_msg.msg_addr_low = lower_16_bits(addr);
+ phy_msg.msg_addr_high = upper_16_bits(addr);
+
+ phy_msg.data = val;
+ phy_msg.dest_dev = hw->ptp.phy.eth56g.phy_addr[phy_idx];
+
+ err = ice_sbq_rw_reg(hw, &phy_msg);
+
+ if (err)
+ ice_debug(hw, ICE_DBG_PTP, "PTP failed to send msg to phy %d\n",
+ err);
+
+ return err;
+}
+
+/**
+ * ice_read_phy_eth56g - Read a PHY port register
+ * @hw: pointer to the HW struct
+ * @phy_idx: PHY index
+ * @addr: PHY register address
+ * @val: Value to write
+ */
+static int ice_read_phy_eth56g(struct ice_hw *hw, u8 phy_idx, u32 addr,
+ u32 *val)
+{
+ struct ice_sbq_msg_input phy_msg;
+ int err;
+
+ phy_msg.opcode = ice_sbq_msg_rd;
+
+ phy_msg.msg_addr_low = lower_16_bits(addr);
+ phy_msg.msg_addr_high = upper_16_bits(addr);
+
+ phy_msg.data = 0;
+ phy_msg.dest_dev = hw->ptp.phy.eth56g.phy_addr[phy_idx];
+
+ err = ice_sbq_rw_reg(hw, &phy_msg);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "PTP failed to send msg to phy %d\n",
+ err);
+ return err;
+ }
+
+ *val = phy_msg.data;
+
+ return 0;
+}
+
+/**
+ * ice_phy_res_address_eth56g - Calculate a PHY port register address
+ * @port: Port number to be written
+ * @res_type: resource type (register/memory)
+ * @offset: Offset from PHY port register base
+ * @addr: The result address
+ */
+static int ice_phy_res_address_eth56g(u8 port, enum eth56g_res_type res_type,
+ u32 offset, u32 *addr)
+{
+ u8 lane = port % ICE_PORTS_PER_QUAD;
+ u8 phy = ICE_GET_QUAD_NUM(port);
+
+ if (res_type >= NUM_ETH56G_PHY_RES)
+ return -EINVAL;
+
+ *addr = eth56g_phy_res[res_type].base[phy] +
+ lane * eth56g_phy_res[res_type].step + offset;
+ return 0;
+}
+
+/**
+ * ice_write_port_eth56g - Write a PHY port register
+ * @hw: pointer to the HW struct
+ * @offset: PHY register offset
+ * @port: Port number
+ * @val: Value to write
+ * @res_type: resource type (register/memory)
+ */
+static int ice_write_port_eth56g(struct ice_hw *hw, u8 port, u32 offset,
+ u32 val, enum eth56g_res_type res_type)
+{
+ u8 phy_port = port % hw->ptp.ports_per_phy;
+ u8 phy_idx = port / hw->ptp.ports_per_phy;
+ u32 addr;
+ int err;
+
+ if (port >= hw->ptp.num_lports)
+ return -EIO;
+
+ err = ice_phy_res_address_eth56g(phy_port, res_type, offset, &addr);
+ if (err)
+ return err;
+
+ return ice_write_phy_eth56g(hw, phy_idx, addr, val);
+}
+
+/**
+ * ice_read_port_eth56g - Read a PHY port register
+ * @hw: pointer to the HW struct
+ * @offset: PHY register offset
+ * @port: Port number
+ * @val: Value to write
+ * @res_type: resource type (register/memory)
+ */
+static int ice_read_port_eth56g(struct ice_hw *hw, u8 port, u32 offset,
+ u32 *val, enum eth56g_res_type res_type)
+{
+ u8 phy_port = port % hw->ptp.ports_per_phy;
+ u8 phy_idx = port / hw->ptp.ports_per_phy;
+ u32 addr;
+ int err;
+
+ if (port >= hw->ptp.num_lports)
+ return -EINVAL;
+
+ err = ice_phy_res_address_eth56g(phy_port, res_type, offset, &addr);
+ if (err)
+ return err;
+
+ return ice_read_phy_eth56g(hw, phy_idx, addr, val);
+}
+
+/**
+ * ice_write_ptp_reg_eth56g - Write a PHY port register
+ * @hw: pointer to the HW struct
+ * @port: Port number to be written
+ * @offset: Offset from PHY port register base
+ * @val: Value to write
+ */
+static int ice_write_ptp_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset,
+ u32 val)
+{
+ return ice_write_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_PTP);
+}
+
+/**
+ * ice_write_mac_reg_eth56g - Write a MAC PHY port register
+ * parameter
+ * @hw: pointer to the HW struct
+ * @port: Port number to be written
+ * @offset: Offset from PHY port register base
+ * @val: Value to write
+ */
+static int ice_write_mac_reg_eth56g(struct ice_hw *hw, u8 port, u32 offset,
+ u32 val)
+{
+ return ice_write_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_MAC);
+}
+
+/**
+ * ice_write_xpcs_reg_eth56g - Write a PHY port register
+ * @hw: pointer to the HW struct
+ * @port: Port number to be written
+ * @offset: Offset from PHY port register base
+ * @val: Value to write
+ */
+static int ice_write_xpcs_reg_eth56g(struct ice_hw *hw, u8 port, u32 offset,
+ u32 val)
+{
+ return ice_write_port_eth56g(hw, port, offset, val,
+ ETH56G_PHY_REG_XPCS);
+}
+
+/**
+ * ice_read_ptp_reg_eth56g - Read a PHY port register
+ * @hw: pointer to the HW struct
+ * @port: Port number to be read
+ * @offset: Offset from PHY port register base
+ * @val: Pointer to the value to read (out param)
+ */
+static int ice_read_ptp_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset,
+ u32 *val)
+{
+ return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_PTP);
+}
+
+/**
+ * ice_read_mac_reg_eth56g - Read a PHY port register
+ * @hw: pointer to the HW struct
+ * @port: Port number to be read
+ * @offset: Offset from PHY port register base
+ * @val: Pointer to the value to read (out param)
+ */
+static int ice_read_mac_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset,
+ u32 *val)
+{
+ return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_MAC);
+}
+
+/**
+ * ice_read_gpcs_reg_eth56g - Read a PHY port register
+ * @hw: pointer to the HW struct
+ * @port: Port number to be read
+ * @offset: Offset from PHY port register base
+ * @val: Pointer to the value to read (out param)
+ */
+static int ice_read_gpcs_reg_eth56g(struct ice_hw *hw, u8 port, u16 offset,
+ u32 *val)
+{
+ return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_REG_GPCS);
+}
+
+/**
+ * ice_ptp_read_port_mem_eth56g - Read a PHY port memory location
+ * @hw: pointer to the HW struct
+ * @port: Port number to be read
+ * @offset: Offset from PHY port register base
+ * @val: Pointer to the value to read (out param)
+ */
+static int ice_ptp_read_port_mem_eth56g(struct ice_hw *hw, u8 port, u16 offset,
+ u32 *val)
+{
+ return ice_read_port_eth56g(hw, port, offset, val, ETH56G_PHY_MEM_PTP);
+}
+
+/**
+ * ice_ptp_write_port_mem_eth56g - Write a PHY port memory location
+ * @hw: pointer to the HW struct
+ * @port: Port number to be read
+ * @offset: Offset from PHY port register base
+ * @val: Pointer to the value to read (out param)
+ */
+static int ice_ptp_write_port_mem_eth56g(struct ice_hw *hw, u8 port, u16 offset,
+ u32 val)
+{
+ return ice_write_port_eth56g(hw, port, offset, val, ETH56G_PHY_MEM_PTP);
+}
+
+/**
+ * ice_is_64b_phy_reg_eth56g - Check if this is a 64bit PHY register
+ * @low_addr: the low address to check
+ * @high_addr: on return, contains the high address of the 64bit register
+ *
+ * Check if the provided low address is one of the known 64bit PHY values
+ * represented as two 32bit registers. If it is, return the appropriate high
+ * register offset to use.
+ */
+static bool ice_is_64b_phy_reg_eth56g(u16 low_addr, u16 *high_addr)
+{
+ switch (low_addr) {
+ case PHY_REG_TX_TIMER_INC_PRE_L:
+ *high_addr = PHY_REG_TX_TIMER_INC_PRE_U;
+ return true;
+ case PHY_REG_RX_TIMER_INC_PRE_L:
+ *high_addr = PHY_REG_RX_TIMER_INC_PRE_U;
+ return true;
+ case PHY_REG_TX_CAPTURE_L:
+ *high_addr = PHY_REG_TX_CAPTURE_U;
+ return true;
+ case PHY_REG_RX_CAPTURE_L:
+ *high_addr = PHY_REG_RX_CAPTURE_U;
+ return true;
+ case PHY_REG_TOTAL_TX_OFFSET_L:
+ *high_addr = PHY_REG_TOTAL_TX_OFFSET_U;
+ return true;
+ case PHY_REG_TOTAL_RX_OFFSET_L:
+ *high_addr = PHY_REG_TOTAL_RX_OFFSET_U;
+ return true;
+ case PHY_REG_TX_MEMORY_STATUS_L:
+ *high_addr = PHY_REG_TX_MEMORY_STATUS_U;
+ return true;
+ default:
+ return false;
+ }
+}
+
+/**
+ * ice_is_40b_phy_reg_eth56g - Check if this is a 40bit PHY register
+ * @low_addr: the low address to check
+ * @high_addr: on return, contains the high address of the 40bit value
+ *
+ * Check if the provided low address is one of the known 40bit PHY values
+ * split into two registers with the lower 8 bits in the low register and the
+ * upper 32 bits in the high register. If it is, return the high register
+ * offset to use.
+ */
+static bool ice_is_40b_phy_reg_eth56g(u16 low_addr, u16 *high_addr)
+{
+ switch (low_addr) {
+ case PHY_REG_TIMETUS_L:
+ *high_addr = PHY_REG_TIMETUS_U;
+ return true;
+ case PHY_PCS_REF_TUS_L:
+ *high_addr = PHY_PCS_REF_TUS_U;
+ return true;
+ case PHY_PCS_REF_INC_L:
+ *high_addr = PHY_PCS_REF_INC_U;
+ return true;
+ default:
+ return false;
+ }
+}
+
+/**
+ * ice_read_64b_phy_reg_eth56g - Read a 64bit value from PHY registers
+ * @hw: pointer to the HW struct
+ * @port: PHY port to read from
+ * @low_addr: offset of the lower register to read from
+ * @val: on return, the contents of the 64bit value from the PHY registers
+ * @res_type: resource type
+ *
+ * Check if the caller has specified a known 40 bit register offset and read
+ * the two registers associated with a 40bit value and return it in the val
+ * pointer.
+ */
+static int ice_read_64b_phy_reg_eth56g(struct ice_hw *hw, u8 port, u16 low_addr,
+ u64 *val, enum eth56g_res_type res_type)
+{
+ u16 high_addr;
+ u32 lo, hi;
+ int err;
+
+ if (!ice_is_64b_phy_reg_eth56g(low_addr, &high_addr))
+ return -EINVAL;
+
+ err = ice_read_port_eth56g(hw, port, low_addr, &lo, res_type);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read from low register %#08x\n, err %d",
+ low_addr, err);
+ return err;
+ }
+
+ err = ice_read_port_eth56g(hw, port, high_addr, &hi, res_type);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read from high register %#08x\n, err %d",
+ high_addr, err);
+ return err;
+ }
+
+ *val = ((u64)hi << 32) | lo;
+
+ return 0;
+}
+
+/**
+ * ice_read_64b_ptp_reg_eth56g - Read a 64bit value from PHY registers
+ * @hw: pointer to the HW struct
+ * @port: PHY port to read from
+ * @low_addr: offset of the lower register to read from
+ * @val: on return, the contents of the 64bit value from the PHY registers
+ *
+ * Check if the caller has specified a known 40 bit register offset and read
+ * the two registers associated with a 40bit value and return it in the val
+ * pointer.
+ */
+static int ice_read_64b_ptp_reg_eth56g(struct ice_hw *hw, u8 port, u16 low_addr,
+ u64 *val)
+{
+ return ice_read_64b_phy_reg_eth56g(hw, port, low_addr, val,
+ ETH56G_PHY_REG_PTP);
+}
+
+/**
+ * ice_write_40b_phy_reg_eth56g - Write a 40b value to the PHY
+ * @hw: pointer to the HW struct
+ * @port: port to write to
+ * @low_addr: offset of the low register
+ * @val: 40b value to write
+ * @res_type: resource type
+ *
+ * Check if the caller has specified a known 40 bit register offset and write
+ * provided 40b value to the two associated registers by splitting it up into
+ * two chunks, the lower 8 bits and the upper 32 bits.
+ */
+static int ice_write_40b_phy_reg_eth56g(struct ice_hw *hw, u8 port,
+ u16 low_addr, u64 val,
+ enum eth56g_res_type res_type)
+{
+ u16 high_addr;
+ u32 lo, hi;
+ int err;
+
+ if (!ice_is_40b_phy_reg_eth56g(low_addr, &high_addr))
+ return -EINVAL;
+
+ lo = (u32)(val & P_REG_40B_LOW_M);
+ hi = (u32)(val >> P_REG_40B_HIGH_S);
+
+ err = ice_write_port_eth56g(hw, port, low_addr, lo, res_type);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write to low register 0x%08x\n, err %d",
+ low_addr, err);
+ return err;
+ }
+
+ err = ice_write_port_eth56g(hw, port, high_addr, hi, res_type);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write to high register 0x%08x\n, err %d",
+ high_addr, err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_write_40b_ptp_reg_eth56g - Write a 40b value to the PHY
+ * @hw: pointer to the HW struct
+ * @port: port to write to
+ * @low_addr: offset of the low register
+ * @val: 40b value to write
+ *
+ * Check if the caller has specified a known 40 bit register offset and write
+ * provided 40b value to the two associated registers by splitting it up into
+ * two chunks, the lower 8 bits and the upper 32 bits.
+ */
+static int ice_write_40b_ptp_reg_eth56g(struct ice_hw *hw, u8 port,
+ u16 low_addr, u64 val)
+{
+ return ice_write_40b_phy_reg_eth56g(hw, port, low_addr, val,
+ ETH56G_PHY_REG_PTP);
+}
+
+/**
+ * ice_write_64b_phy_reg_eth56g - Write a 64bit value to PHY registers
+ * @hw: pointer to the HW struct
+ * @port: PHY port to read from
+ * @low_addr: offset of the lower register to read from
+ * @val: the contents of the 64bit value to write to PHY
+ * @res_type: resource type
+ *
+ * Check if the caller has specified a known 64 bit register offset and write
+ * the 64bit value to the two associated 32bit PHY registers.
+ */
+static int ice_write_64b_phy_reg_eth56g(struct ice_hw *hw, u8 port,
+ u16 low_addr, u64 val,
+ enum eth56g_res_type res_type)
+{
+ u16 high_addr;
+ u32 lo, hi;
+ int err;
+
+ if (!ice_is_64b_phy_reg_eth56g(low_addr, &high_addr))
+ return -EINVAL;
+
+ lo = lower_32_bits(val);
+ hi = upper_32_bits(val);
+
+ err = ice_write_port_eth56g(hw, port, low_addr, lo, res_type);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write to low register 0x%08x\n, err %d",
+ low_addr, err);
+ return err;
+ }
+
+ err = ice_write_port_eth56g(hw, port, high_addr, hi, res_type);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write to high register 0x%08x\n, err %d",
+ high_addr, err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_write_64b_ptp_reg_eth56g - Write a 64bit value to PHY registers
+ * @hw: pointer to the HW struct
+ * @port: PHY port to read from
+ * @low_addr: offset of the lower register to read from
+ * @val: the contents of the 64bit value to write to PHY
+ *
+ * Check if the caller has specified a known 64 bit register offset and write
+ * the 64bit value to the two associated 32bit PHY registers.
+ */
+static int ice_write_64b_ptp_reg_eth56g(struct ice_hw *hw, u8 port,
+ u16 low_addr, u64 val)
+{
+ return ice_write_64b_phy_reg_eth56g(hw, port, low_addr, val,
+ ETH56G_PHY_REG_PTP);
+}
+
+/**
+ * ice_read_ptp_tstamp_eth56g - Read a PHY timestamp out of the port memory
+ * @hw: pointer to the HW struct
+ * @port: the port to read from
+ * @idx: the timestamp index to read
+ * @tstamp: on return, the 40bit timestamp value
+ *
+ * Read a 40bit timestamp value out of the two associated entries in the
+ * port memory block of the internal PHYs of the 56G devices.
+ */
+static int ice_read_ptp_tstamp_eth56g(struct ice_hw *hw, u8 port, u8 idx,
+ u64 *tstamp)
+{
+ u16 lo_addr, hi_addr;
+ u32 lo, hi;
+ int err;
+
+ lo_addr = (u16)PHY_TSTAMP_L(idx);
+ hi_addr = (u16)PHY_TSTAMP_U(idx);
+
+ err = ice_ptp_read_port_mem_eth56g(hw, port, lo_addr, &lo);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read low PTP timestamp register, err %d\n",
+ err);
+ return err;
+ }
+
+ err = ice_ptp_read_port_mem_eth56g(hw, port, hi_addr, &hi);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read high PTP timestamp register, err %d\n",
+ err);
+ return err;
+ }
+
+ /* For 56G based internal PHYs, the timestamp is reported with the
+ * lower 8 bits in the low register, and the upper 32 bits in the high
+ * register.
+ */
+ *tstamp = ((u64)hi) << TS_PHY_HIGH_S | ((u64)lo & TS_PHY_LOW_M);
+
+ return 0;
+}
+
+/**
+ * ice_clear_ptp_tstamp_eth56g - Clear a timestamp from the quad block
+ * @hw: pointer to the HW struct
+ * @port: the quad to read from
+ * @idx: the timestamp index to reset
+ *
+ * Read and then forcibly clear the timestamp index to ensure the valid bit is
+ * cleared and the timestamp status bit is reset in the PHY port memory of
+ * internal PHYs of the 56G devices.
+ *
+ * To directly clear the contents of the timestamp block entirely, discarding
+ * all timestamp data at once, software should instead use
+ * ice_ptp_reset_ts_memory_quad_eth56g().
+ *
+ * This function should only be called on an idx whose bit is set according to
+ * ice_get_phy_tx_tstamp_ready().
+ */
+static int ice_clear_ptp_tstamp_eth56g(struct ice_hw *hw, u8 port, u8 idx)
+{
+ u64 unused_tstamp;
+ u16 lo_addr;
+ int err;
+
+ /* Read the timestamp register to ensure the timestamp status bit is
+ * cleared.
+ */
+ err = ice_read_ptp_tstamp_eth56g(hw, port, idx, &unused_tstamp);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read the PHY timestamp register for port %u, idx %u, err %d\n",
+ port, idx, err);
+ }
+
+ lo_addr = (u16)PHY_TSTAMP_L(idx);
+
+ err = ice_ptp_write_port_mem_eth56g(hw, port, lo_addr, 0);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to clear low PTP timestamp register for port %u, idx %u, err %d\n",
+ port, idx, err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_ptp_reset_ts_memory_eth56g - Clear all timestamps from the port block
+ * @hw: pointer to the HW struct
+ */
+static void ice_ptp_reset_ts_memory_eth56g(struct ice_hw *hw)
+{
+ unsigned int port;
+
+ for (port = 0; port < hw->ptp.num_lports; port++) {
+ ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_MEMORY_STATUS_L,
+ 0);
+ ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_MEMORY_STATUS_U,
+ 0);
+ }
+}
+
+/**
+ * ice_ptp_prep_port_time_eth56g - Prepare one PHY port with initial time
+ * @hw: pointer to the HW struct
+ * @port: port number
+ * @time: time to initialize the PHY port clocks to
+ *
+ * Write a new initial time value into registers of a specific PHY port.
+ */
+static int ice_ptp_prep_port_time_eth56g(struct ice_hw *hw, u8 port,
+ u64 time)
+{
+ int err;
+
+ /* Tx case */
+ err = ice_write_64b_ptp_reg_eth56g(hw, port, PHY_REG_TX_TIMER_INC_PRE_L,
+ time);
+ if (err)
+ return err;
+
+ /* Rx case */
+ return ice_write_64b_ptp_reg_eth56g(hw, port,
+ PHY_REG_RX_TIMER_INC_PRE_L, time);
+}
+
+/**
+ * ice_ptp_prep_phy_time_eth56g - Prepare PHY port with initial time
+ * @hw: pointer to the HW struct
+ * @time: Time to initialize the PHY port clocks to
+ *
+ * Program the PHY port registers with a new initial time value. The port
+ * clock will be initialized once the driver issues an ICE_PTP_INIT_TIME sync
+ * command. The time value is the upper 32 bits of the PHY timer, usually in
+ * units of nominal nanoseconds.
+ */
+static int ice_ptp_prep_phy_time_eth56g(struct ice_hw *hw, u32 time)
+{
+ u64 phy_time;
+ u8 port;
+
+ /* The time represents the upper 32 bits of the PHY timer, so we need
+ * to shift to account for this when programming.
+ */
+ phy_time = (u64)time << 32;
+
+ for (port = 0; port < hw->ptp.num_lports; port++) {
+ int err;
+
+ err = ice_ptp_prep_port_time_eth56g(hw, port, phy_time);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write init time for port %u, err %d\n",
+ port, err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ice_ptp_prep_port_adj_eth56g - Prepare a single port for time adjust
+ * @hw: pointer to HW struct
+ * @port: Port number to be programmed
+ * @time: time in cycles to adjust the port clocks
+ *
+ * Program the port for an atomic adjustment by writing the Tx and Rx timer
+ * registers. The atomic adjustment won't be completed until the driver issues
+ * an ICE_PTP_ADJ_TIME command.
+ *
+ * Note that time is not in units of nanoseconds. It is in clock time
+ * including the lower sub-nanosecond portion of the port timer.
+ *
+ * Negative adjustments are supported using 2s complement arithmetic.
+ */
+static int ice_ptp_prep_port_adj_eth56g(struct ice_hw *hw, u8 port, s64 time)
+{
+ u32 l_time, u_time;
+ int err;
+
+ l_time = lower_32_bits(time);
+ u_time = upper_32_bits(time);
+
+ /* Tx case */
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_TIMER_INC_PRE_L,
+ l_time);
+ if (err)
+ goto exit_err;
+
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_TIMER_INC_PRE_U,
+ u_time);
+ if (err)
+ goto exit_err;
+
+ /* Rx case */
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_TIMER_INC_PRE_L,
+ l_time);
+ if (err)
+ goto exit_err;
+
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_TIMER_INC_PRE_U,
+ u_time);
+ if (err)
+ goto exit_err;
+
+ return 0;
+
+exit_err:
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write time adjust for port %u, err %d\n",
+ port, err);
+ return err;
+}
+
+/**
+ * ice_ptp_prep_phy_adj_eth56g - Prep PHY ports for a time adjustment
+ * @hw: pointer to HW struct
+ * @adj: adjustment in nanoseconds
+ *
+ * Prepare the PHY ports for an atomic time adjustment by programming the PHY
+ * Tx and Rx port registers. The actual adjustment is completed by issuing an
+ * ICE_PTP_ADJ_TIME or ICE_PTP_ADJ_TIME_AT_TIME sync command.
+ */
+static int ice_ptp_prep_phy_adj_eth56g(struct ice_hw *hw, s32 adj)
+{
+ int err = 0;
+ s64 cycles;
+ u8 port;
+
+ /* The port clock supports adjustment of the sub-nanosecond portion of
+ * the clock (lowest 32 bits). We shift the provided adjustment in
+ * nanoseconds by 32 to calculate the appropriate adjustment to program
+ * into the PHY ports.
+ */
+ cycles = (s64)adj << 32;
+
+ for (port = 0; port < hw->ptp.num_lports; port++) {
+ err = ice_ptp_prep_port_adj_eth56g(hw, port, cycles);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+/**
+ * ice_ptp_prep_phy_incval_eth56g - Prepare PHY ports for time adjustment
+ * @hw: pointer to HW struct
+ * @incval: new increment value to prepare
+ *
+ * Prepare each of the PHY ports for a new increment value by programming the
+ * port's TIMETUS registers. The new increment value will be updated after
+ * issuing an ICE_PTP_INIT_INCVAL command.
+ */
+static int ice_ptp_prep_phy_incval_eth56g(struct ice_hw *hw, u64 incval)
+{
+ u8 port;
+
+ for (port = 0; port < hw->ptp.num_lports; port++) {
+ int err;
+
+ err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_REG_TIMETUS_L,
+ incval);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write incval for port %u, err %d\n",
+ port, err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ice_ptp_read_port_capture_eth56g - Read a port's local time capture
+ * @hw: pointer to HW struct
+ * @port: Port number to read
+ * @tx_ts: on return, the Tx port time capture
+ * @rx_ts: on return, the Rx port time capture
+ *
+ * Read the port's Tx and Rx local time capture values.
+ */
+static int ice_ptp_read_port_capture_eth56g(struct ice_hw *hw, u8 port,
+ u64 *tx_ts, u64 *rx_ts)
+{
+ int err;
+
+ /* Tx case */
+ err = ice_read_64b_ptp_reg_eth56g(hw, port, PHY_REG_TX_CAPTURE_L,
+ tx_ts);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read REG_TX_CAPTURE, err %d\n",
+ err);
+ return err;
+ }
+
+ ice_debug(hw, ICE_DBG_PTP, "tx_init = %#016llx\n", *tx_ts);
+
+ /* Rx case */
+ err = ice_read_64b_ptp_reg_eth56g(hw, port, PHY_REG_RX_CAPTURE_L,
+ rx_ts);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read RX_CAPTURE, err %d\n",
+ err);
+ return err;
+ }
+
+ ice_debug(hw, ICE_DBG_PTP, "rx_init = %#016llx\n", *rx_ts);
+
+ return 0;
+}
+
+/**
+ * ice_ptp_write_port_cmd_eth56g - Prepare a single PHY port for a timer command
+ * @hw: pointer to HW struct
+ * @port: Port to which cmd has to be sent
+ * @cmd: Command to be sent to the port
+ *
+ * Prepare the requested port for an upcoming timer sync command.
+ */
+static int ice_ptp_write_port_cmd_eth56g(struct ice_hw *hw, u8 port,
+ enum ice_ptp_tmr_cmd cmd)
+{
+ u32 val = ice_ptp_tmr_cmd_to_port_reg(hw, cmd);
+ int err;
+
+ /* Tx case */
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_TMR_CMD, val);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write back TX_TMR_CMD, err %d\n",
+ err);
+ return err;
+ }
+
+ /* Rx case */
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_TMR_CMD, val);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write back RX_TMR_CMD, err %d\n",
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_phy_get_speed_eth56g - Get link speed based on PHY link type
+ * @li: pointer to link information struct
+ */
+static enum ice_eth56g_link_spd
+ice_phy_get_speed_eth56g(struct ice_link_status *li)
+{
+ u16 speed = ice_get_link_speed_based_on_phy_type(li->phy_type_low,
+ li->phy_type_high);
+
+ switch (speed) {
+ case ICE_AQ_LINK_SPEED_1000MB:
+ return ICE_ETH56G_LNK_SPD_1G;
+ case ICE_AQ_LINK_SPEED_2500MB:
+ return ICE_ETH56G_LNK_SPD_2_5G;
+ case ICE_AQ_LINK_SPEED_10GB:
+ return ICE_ETH56G_LNK_SPD_10G;
+ case ICE_AQ_LINK_SPEED_25GB:
+ return ICE_ETH56G_LNK_SPD_25G;
+ case ICE_AQ_LINK_SPEED_40GB:
+ return ICE_ETH56G_LNK_SPD_40G;
+ case ICE_AQ_LINK_SPEED_50GB:
+ switch (li->phy_type_low) {
+ case ICE_PHY_TYPE_LOW_50GBASE_SR:
+ case ICE_PHY_TYPE_LOW_50GBASE_FR:
+ case ICE_PHY_TYPE_LOW_50GBASE_LR:
+ case ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4:
+ case ICE_PHY_TYPE_LOW_50G_AUI1_AOC_ACC:
+ case ICE_PHY_TYPE_LOW_50G_AUI1:
+ return ICE_ETH56G_LNK_SPD_50G;
+ default:
+ return ICE_ETH56G_LNK_SPD_50G2;
+ }
+ case ICE_AQ_LINK_SPEED_100GB:
+ if (li->phy_type_high ||
+ li->phy_type_low == ICE_PHY_TYPE_LOW_100GBASE_SR2)
+ return ICE_ETH56G_LNK_SPD_100G2;
+ else
+ return ICE_ETH56G_LNK_SPD_100G;
+ default:
+ return ICE_ETH56G_LNK_SPD_1G;
+ }
+}
+
+/**
+ * ice_phy_cfg_parpcs_eth56g - Configure TUs per PAR/PCS clock cycle
+ * @hw: pointer to the HW struct
+ * @port: port to configure
+ *
+ * Configure the number of TUs for the PAR and PCS clocks used as part of the
+ * timestamp calibration process.
+ */
+static int ice_phy_cfg_parpcs_eth56g(struct ice_hw *hw, u8 port)
+{
+ u8 port_blk = port & ~(ICE_PORTS_PER_QUAD - 1);
+ u32 val;
+ int err;
+
+ err = ice_write_xpcs_reg_eth56g(hw, port, PHY_VENDOR_TXLANE_THRESH,
+ ICE_ETH56G_NOMINAL_THRESH4);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read VENDOR_TXLANE_THRESH, status: %d",
+ err);
+ return err;
+ }
+
+ switch (ice_phy_get_speed_eth56g(&hw->port_info->phy.link_info)) {
+ case ICE_ETH56G_LNK_SPD_1G:
+ case ICE_ETH56G_LNK_SPD_2_5G:
+ err = ice_read_ptp_reg_eth56g(hw, port_blk,
+ PHY_GPCS_CONFIG_REG0, &val);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read PHY_GPCS_CONFIG_REG0, status: %d",
+ err);
+ return err;
+ }
+
+ val &= ~PHY_GPCS_CONFIG_REG0_TX_THR_M;
+ val |= FIELD_PREP(PHY_GPCS_CONFIG_REG0_TX_THR_M,
+ ICE_ETH56G_NOMINAL_TX_THRESH);
+
+ err = ice_write_ptp_reg_eth56g(hw, port_blk,
+ PHY_GPCS_CONFIG_REG0, val);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write PHY_GPCS_CONFIG_REG0, status: %d",
+ err);
+ return err;
+ }
+ break;
+ default:
+ break;
+ }
+
+ err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_PCS_REF_TUS_L,
+ ICE_ETH56G_NOMINAL_PCS_REF_TUS);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write PHY_PCS_REF_TUS, status: %d",
+ err);
+ return err;
+ }
+
+ err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_PCS_REF_INC_L,
+ ICE_ETH56G_NOMINAL_PCS_REF_INC);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to write PHY_PCS_REF_INC, status: %d",
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_phy_cfg_ptp_1step_eth56g - Configure 1-step PTP settings
+ * @hw: Pointer to the HW struct
+ * @port: Port to configure
+ */
+int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port)
+{
+ u8 port_blk = port & ~(ICE_PORTS_PER_QUAD - 1);
+ u8 blk_port = port & (ICE_PORTS_PER_QUAD - 1);
+ bool enable, sfd_ena;
+ u32 val, peer_delay;
+ int err;
+
+ enable = hw->ptp.phy.eth56g.onestep_ena;
+ peer_delay = hw->ptp.phy.eth56g.peer_delay;
+ sfd_ena = hw->ptp.phy.eth56g.sfd_ena;
+
+ /* PHY_PTP_1STEP_CONFIG */
+ err = ice_read_ptp_reg_eth56g(hw, port_blk, PHY_PTP_1STEP_CONFIG, &val);
+ if (err)
+ return err;
+
+ if (enable)
+ val |= blk_port;
+ else
+ val &= ~blk_port;
+
+ val &= ~(PHY_PTP_1STEP_T1S_UP64_M | PHY_PTP_1STEP_T1S_DELTA_M);
+
+ err = ice_write_ptp_reg_eth56g(hw, port_blk, PHY_PTP_1STEP_CONFIG, val);
+ if (err)
+ return err;
+
+ /* PHY_PTP_1STEP_PEER_DELAY */
+ val = FIELD_PREP(PHY_PTP_1STEP_PD_DELAY_M, peer_delay);
+ if (peer_delay)
+ val |= PHY_PTP_1STEP_PD_ADD_PD_M;
+ val |= PHY_PTP_1STEP_PD_DLY_V_M;
+ err = ice_write_ptp_reg_eth56g(hw, port_blk,
+ PHY_PTP_1STEP_PEER_DELAY(blk_port), val);
+ if (err)
+ return err;
+
+ val &= ~PHY_PTP_1STEP_PD_DLY_V_M;
+ err = ice_write_ptp_reg_eth56g(hw, port_blk,
+ PHY_PTP_1STEP_PEER_DELAY(blk_port), val);
+ if (err)
+ return err;
+
+ /* PHY_MAC_XIF_MODE */
+ err = ice_read_mac_reg_eth56g(hw, port, PHY_MAC_XIF_MODE, &val);
+ if (err)
+ return err;
+
+ val &= ~(PHY_MAC_XIF_1STEP_ENA_M | PHY_MAC_XIF_TS_BIN_MODE_M |
+ PHY_MAC_XIF_TS_SFD_ENA_M | PHY_MAC_XIF_GMII_TS_SEL_M);
+
+ switch (ice_phy_get_speed_eth56g(&hw->port_info->phy.link_info)) {
+ case ICE_ETH56G_LNK_SPD_1G:
+ case ICE_ETH56G_LNK_SPD_2_5G:
+ val |= PHY_MAC_XIF_GMII_TS_SEL_M;
+ break;
+ default:
+ break;
+ }
+
+ val |= FIELD_PREP(PHY_MAC_XIF_1STEP_ENA_M, enable) |
+ FIELD_PREP(PHY_MAC_XIF_TS_BIN_MODE_M, enable) |
+ FIELD_PREP(PHY_MAC_XIF_TS_SFD_ENA_M, sfd_ena);
+
+ return ice_write_mac_reg_eth56g(hw, port, PHY_MAC_XIF_MODE, val);
+}
+
+/**
+ * mul_u32_u32_fx_q9 - Multiply two u32 fixed point Q9 values
+ * @a: multiplier value
+ * @b: multiplicand value
+ */
+static inline u32 mul_u32_u32_fx_q9(u32 a, u32 b)
+{
+ return (u32)(((u64)a * b) >> ICE_ETH56G_MAC_CFG_FRAC_W);
+}
+
+/**
+ * add_u32_u32_fx - Add two u32 fixed point values and discard overflow
+ * @a: first value
+ * @b: second value
+ */
+static inline u32 add_u32_u32_fx(u32 a, u32 b)
+{
+ return lower_32_bits(((u64)a + b));
+}
+
+/**
+ * ice_ptp_calc_bitslip_eth56g - Calculate bitslip value
+ * @hw: pointer to the HW struct
+ * @port: port to configure
+ * @bs: bitslip multiplier
+ * @fc: FC-FEC enabled
+ * @rs: RS-FEC enabled
+ * @spd: link speed
+ */
+static u32 ice_ptp_calc_bitslip_eth56g(struct ice_hw *hw, u8 port, u32 bs,
+ bool fc, bool rs,
+ enum ice_eth56g_link_spd spd)
+{
+ u8 port_offset = port & (ICE_PORTS_PER_QUAD - 1);
+ u8 port_blk = port & ~(ICE_PORTS_PER_QUAD - 1);
+ u32 bitslip;
+ int err;
+
+ if (!bs || rs)
+ return 0;
+
+ if (spd == ICE_ETH56G_LNK_SPD_1G || spd == ICE_ETH56G_LNK_SPD_2_5G)
+ err = ice_read_gpcs_reg_eth56g(hw, port, PHY_GPCS_BITSLIP,
+ &bitslip);
+ else
+ err = ice_read_ptp_reg_eth56g(hw, port_blk,
+ PHY_REG_SD_BIT_SLIP(port_offset),
+ &bitslip);
+ if (err)
+ return 0;
+
+ if (spd == ICE_ETH56G_LNK_SPD_1G && !bitslip) {
+ /* Bitslip register value of 0 corresponds to 10 so substitute
+ * it for calculations
+ */
+ bitslip = 10;
+ } else if (spd == ICE_ETH56G_LNK_SPD_10G ||
+ spd == ICE_ETH56G_LNK_SPD_25G) {
+ if (fc)
+ bitslip = bitslip * 2 + 32;
+ else
+ bitslip = (u32)((s32)bitslip * -1 + 20);
+ }
+
+ bitslip <<= ICE_ETH56G_MAC_CFG_FRAC_W;
+ return mul_u32_u32_fx_q9(bitslip, bs);
+}
+
+/**
+ * ice_ptp_calc_deskew_eth56g - Calculate deskew value
+ * @hw: pointer to the HW struct
+ * @port: port to configure
+ * @ds: deskew multiplier
+ * @rs: RS-FEC enabled
+ * @spd: link speed
+ */
+static u32 ice_ptp_calc_deskew_eth56g(struct ice_hw *hw, u8 port, u32 ds,
+ bool rs, enum ice_eth56g_link_spd spd)
+{
+ u32 deskew_i, deskew_f;
+ int err;
+
+ if (!ds)
+ return 0;
+
+ read_poll_timeout(ice_read_ptp_reg_eth56g, err,
+ FIELD_GET(PHY_REG_DESKEW_0_VALID, deskew_i), 500,
+ 50 * USEC_PER_MSEC, false, hw, port, PHY_REG_DESKEW_0,
+ &deskew_i);
+ if (err)
+ return err;
+
+ deskew_f = FIELD_GET(PHY_REG_DESKEW_0_RLEVEL_FRAC, deskew_i);
+ deskew_i = FIELD_GET(PHY_REG_DESKEW_0_RLEVEL, deskew_i);
+
+ if (rs && spd == ICE_ETH56G_LNK_SPD_50G2)
+ ds = 0x633; /* 3.1 */
+ else if (rs && spd == ICE_ETH56G_LNK_SPD_100G)
+ ds = 0x31b; /* 1.552 */
+
+ deskew_i = FIELD_PREP(ICE_ETH56G_MAC_CFG_RX_OFFSET_INT, deskew_i);
+ /* Shift 3 fractional bits to the end of the integer part */
+ deskew_f <<= ICE_ETH56G_MAC_CFG_FRAC_W - PHY_REG_DESKEW_0_RLEVEL_FRAC_W;
+ return mul_u32_u32_fx_q9(deskew_i | deskew_f, ds);
+}
+
+/**
+ * ice_phy_set_offsets_eth56g - Set Tx/Rx offset values
+ * @hw: pointer to the HW struct
+ * @port: port to configure
+ * @spd: link speed
+ * @cfg: structure to store output values
+ * @fc: FC-FEC enabled
+ * @rs: RS-FEC enabled
+ */
+static int ice_phy_set_offsets_eth56g(struct ice_hw *hw, u8 port,
+ enum ice_eth56g_link_spd spd,
+ const struct ice_eth56g_mac_reg_cfg *cfg,
+ bool fc, bool rs)
+{
+ u32 rx_offset, tx_offset, bs_ds;
+ bool onestep, sfd;
+
+#ifdef SWITCH_MODE
+ onestep = ice_is_bit_set(hw->ptp.phy.eth56g.onestep_ena, port);
+ sfd = ice_is_bit_set(hw->ptp.phy.eth56g.sfd_ena, port);
+#else /* SWITCH_MODE */
+ onestep = hw->ptp.phy.eth56g.onestep_ena;
+ sfd = hw->ptp.phy.eth56g.sfd_ena;
+#endif /* SWITCH_MODE */
+ bs_ds = cfg->rx_offset.bs_ds;
+
+ if (fc)
+ rx_offset = cfg->rx_offset.fc;
+ else if (rs)
+ rx_offset = cfg->rx_offset.rs;
+ else
+ rx_offset = cfg->rx_offset.no_fec;
+
+ rx_offset = add_u32_u32_fx(rx_offset, cfg->rx_offset.serdes);
+ if (sfd)
+ rx_offset = add_u32_u32_fx(rx_offset, cfg->rx_offset.sfd);
+
+ if (spd < ICE_ETH56G_LNK_SPD_40G)
+ bs_ds = ice_ptp_calc_bitslip_eth56g(hw, port, bs_ds, fc, rs,
+ spd);
+ else
+ bs_ds = ice_ptp_calc_deskew_eth56g(hw, port, bs_ds, rs, spd);
+ rx_offset = add_u32_u32_fx(rx_offset, bs_ds);
+ rx_offset &= ICE_ETH56G_MAC_CFG_RX_OFFSET_INT |
+ ICE_ETH56G_MAC_CFG_RX_OFFSET_FRAC;
+
+ if (fc)
+ tx_offset = cfg->tx_offset.fc;
+ else if (rs)
+ tx_offset = cfg->tx_offset.rs;
+ else
+ tx_offset = cfg->tx_offset.no_fec;
+ tx_offset += cfg->tx_offset.serdes + cfg->tx_offset.sfd * sfd +
+ cfg->tx_offset.onestep * onestep;
+
+ ice_write_mac_reg_eth56g(hw, port, PHY_MAC_RX_OFFSET, rx_offset);
+ return ice_write_mac_reg_eth56g(hw, port, PHY_MAC_TX_OFFSET, tx_offset);
+}
+
+/**
+ * ice_phy_cfg_mac_eth56g - Configure MAC for PTP
+ * @hw: Pointer to the HW struct
+ * @port: Port to configure
+ */
+static int ice_phy_cfg_mac_eth56g(struct ice_hw *hw, u8 port)
+{
+ const struct ice_eth56g_mac_reg_cfg *cfg;
+ enum ice_eth56g_link_spd spd;
+ struct ice_link_status *li;
+ bool fc = false;
+ bool rs = false;
+ bool onestep;
+ u32 val;
+ int err;
+
+ onestep = hw->ptp.phy.eth56g.onestep_ena;
+ li = &hw->port_info->phy.link_info;
+ spd = ice_phy_get_speed_eth56g(li);
+ if (!!(li->an_info & ICE_AQ_FEC_EN)) {
+ if (spd == ICE_ETH56G_LNK_SPD_10G) {
+ fc = true;
+ } else {
+ fc = !!(li->fec_info & ICE_AQ_LINK_25G_KR_FEC_EN);
+ rs = !!(li->fec_info & ~ICE_AQ_LINK_25G_KR_FEC_EN);
+ }
+ }
+ cfg = ð56g_mac_cfg[spd];
+
+ err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_RX_MODULO, 0);
+ if (err)
+ return err;
+
+ err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_TX_MODULO, 0);
+ if (err)
+ return err;
+
+ val = FIELD_PREP(PHY_MAC_TSU_CFG_TX_MODE_M,
+ cfg->tx_mode.def + rs * cfg->tx_mode.rs) |
+ FIELD_PREP(PHY_MAC_TSU_CFG_TX_MII_MK_DLY_M, cfg->tx_mk_dly) |
+ FIELD_PREP(PHY_MAC_TSU_CFG_TX_MII_CW_DLY_M,
+ cfg->tx_cw_dly.def +
+ onestep * cfg->tx_cw_dly.onestep) |
+ FIELD_PREP(PHY_MAC_TSU_CFG_RX_MODE_M,
+ cfg->rx_mode.def + rs * cfg->rx_mode.rs) |
+ FIELD_PREP(PHY_MAC_TSU_CFG_RX_MII_MK_DLY_M,
+ cfg->rx_mk_dly.def + rs * cfg->rx_mk_dly.rs) |
+ FIELD_PREP(PHY_MAC_TSU_CFG_RX_MII_CW_DLY_M,
+ cfg->rx_cw_dly.def + rs * cfg->rx_cw_dly.rs) |
+ FIELD_PREP(PHY_MAC_TSU_CFG_BLKS_PER_CLK_M, cfg->blks_per_clk);
+ err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_TSU_CONFIG, val);
+ if (err)
+ return err;
+
+ err = ice_write_mac_reg_eth56g(hw, port, PHY_MAC_BLOCKTIME,
+ cfg->blktime);
+ if (err)
+ return err;
+
+ err = ice_phy_set_offsets_eth56g(hw, port, spd, cfg, fc, rs);
+ if (err)
+ return err;
+
+ if (spd == ICE_ETH56G_LNK_SPD_25G && !rs)
+ val = 0;
+ else
+ val = cfg->mktime;
+
+ return ice_write_mac_reg_eth56g(hw, port, PHY_MAC_MARKERTIME, val);
+}
+
+/**
+ * ice_phy_cfg_intr_eth56g - Configure TX timestamp interrupt
+ * @hw: pointer to the HW struct
+ * @port: the timestamp port
+ * @ena: enable or disable interrupt
+ * @threshold: interrupt threshold
+ *
+ * Configure TX timestamp interrupt for the specified port
+ */
+int ice_phy_cfg_intr_eth56g(struct ice_hw *hw, u8 port, bool ena, u8 threshold)
+{
+ int err;
+ u32 val;
+
+ err = ice_read_ptp_reg_eth56g(hw, port, PHY_REG_TS_INT_CONFIG, &val);
+ if (err)
+ return err;
+
+ if (ena) {
+ val |= PHY_TS_INT_CONFIG_ENA_M;
+ val &= ~PHY_TS_INT_CONFIG_THRESHOLD_M;
+ val |= FIELD_PREP(PHY_TS_INT_CONFIG_THRESHOLD_M, threshold);
+ } else {
+ val &= ~PHY_TS_INT_CONFIG_ENA_M;
+ }
+
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TS_INT_CONFIG, val);
+ return err;
+}
+
+/**
+ * ice_read_phy_and_phc_time_eth56g - Simultaneously capture PHC and PHY time
+ * @hw: pointer to the HW struct
+ * @port: the PHY port to read
+ * @phy_time: on return, the 64bit PHY timer value
+ * @phc_time: on return, the lower 64bits of PHC time
+ *
+ * Issue a ICE_PTP_READ_TIME timer command to simultaneously capture the PHY
+ * and PHC timer values.
+ */
+static int ice_read_phy_and_phc_time_eth56g(struct ice_hw *hw, u8 port,
+ u64 *phy_time, u64 *phc_time)
+{
+ u64 tx_time, rx_time;
+ u32 zo, lo;
+ u8 tmr_idx;
+ int err;
+
+ tmr_idx = ice_get_ptp_src_clock_index(hw);
+
+ /* Prepare the PHC timer for a ICE_PTP_READ_TIME capture command */
+ ice_ptp_src_cmd(hw, ICE_PTP_READ_TIME);
+
+ /* Prepare the PHY timer for a ICE_PTP_READ_TIME capture command */
+ err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_READ_TIME);
+ if (err)
+ return err;
+
+ /* Issue the sync to start the ICE_PTP_READ_TIME capture */
+ ice_ptp_exec_tmr_cmd(hw);
+
+ /* Read the captured PHC time from the shadow time registers */
+ zo = rd32(hw, GLTSYN_SHTIME_0(tmr_idx));
+ lo = rd32(hw, GLTSYN_SHTIME_L(tmr_idx));
+ *phc_time = (u64)lo << 32 | zo;
+
+ /* Read the captured PHY time from the PHY shadow registers */
+ err = ice_ptp_read_port_capture_eth56g(hw, port, &tx_time, &rx_time);
+ if (err)
+ return err;
+
+ /* If the PHY Tx and Rx timers don't match, log a warning message.
+ * Note that this should not happen in normal circumstances since the
+ * driver always programs them together.
+ */
+ if (tx_time != rx_time)
+ dev_warn(ice_hw_to_dev(hw), "PHY port %u Tx and Rx timers do not match, tx_time 0x%016llX, rx_time 0x%016llX\n",
+ port, tx_time, rx_time);
+
+ *phy_time = tx_time;
+
+ return 0;
+}
+
+/**
+ * ice_sync_phy_timer_eth56g - Synchronize the PHY timer with PHC timer
+ * @hw: pointer to the HW struct
+ * @port: the PHY port to synchronize
+ *
+ * Perform an adjustment to ensure that the PHY and PHC timers are in sync.
+ * This is done by issuing a ICE_PTP_READ_TIME command which triggers a
+ * simultaneous read of the PHY timer and PHC timer. Then we use the
+ * difference to calculate an appropriate 2s complement addition to add
+ * to the PHY timer in order to ensure it reads the same value as the
+ * primary PHC timer.
+ */
+static int ice_sync_phy_timer_eth56g(struct ice_hw *hw, u8 port)
+{
+ u64 phc_time, phy_time, difference;
+ int err;
+
+ if (!ice_ptp_lock(hw)) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to acquire PTP semaphore\n");
+ return -EBUSY;
+ }
+
+ err = ice_read_phy_and_phc_time_eth56g(hw, port, &phy_time, &phc_time);
+ if (err)
+ goto err_unlock;
+
+ /* Calculate the amount required to add to the port time in order for
+ * it to match the PHC time.
+ *
+ * Note that the port adjustment is done using 2s complement
+ * arithmetic. This is convenient since it means that we can simply
+ * calculate the difference between the PHC time and the port time,
+ * and it will be interpreted correctly.
+ */
+
+ ice_ptp_src_cmd(hw, ICE_PTP_NOP);
+ difference = phc_time - phy_time;
+
+ err = ice_ptp_prep_port_adj_eth56g(hw, port, (s64)difference);
+ if (err)
+ goto err_unlock;
+
+ err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_ADJ_TIME);
+ if (err)
+ goto err_unlock;
+
+ /* Issue the sync to activate the time adjustment */
+ ice_ptp_exec_tmr_cmd(hw);
+
+ /* Re-capture the timer values to flush the command registers and
+ * verify that the time was properly adjusted.
+ */
+ err = ice_read_phy_and_phc_time_eth56g(hw, port, &phy_time, &phc_time);
+ if (err)
+ goto err_unlock;
+
+ dev_info(ice_hw_to_dev(hw),
+ "Port %u PHY time synced to PHC: 0x%016llX, 0x%016llX\n",
+ port, phy_time, phc_time);
+
+err_unlock:
+ ice_ptp_unlock(hw);
+ return err;
+}
+
+/**
+ * ice_stop_phy_timer_eth56g - Stop the PHY clock timer
+ * @hw: pointer to the HW struct
+ * @port: the PHY port to stop
+ * @soft_reset: if true, hold the SOFT_RESET bit of PHY_REG_PS
+ *
+ * Stop the clock of a PHY port. This must be done as part of the flow to
+ * re-calibrate Tx and Rx timestamping offsets whenever the clock time is
+ * initialized or when link speed changes.
+ */
+int ice_stop_phy_timer_eth56g(struct ice_hw *hw, u8 port, bool soft_reset)
+{
+ int err;
+
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_OFFSET_READY, 0);
+ if (err)
+ return err;
+
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_OFFSET_READY, 0);
+ if (err)
+ return err;
+
+ ice_debug(hw, ICE_DBG_PTP, "Disabled clock on PHY port %u\n", port);
+
+ return 0;
+}
+
+/**
+ * ice_start_phy_timer_eth56g - Start the PHY clock timer
+ * @hw: pointer to the HW struct
+ * @port: the PHY port to start
+ *
+ * Start the clock of a PHY port. This must be done as part of the flow to
+ * re-calibrate Tx and Rx timestamping offsets whenever the clock time is
+ * initialized or when link speed changes.
+ *
+ */
+int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port)
+{
+ u32 lo, hi;
+ u64 incval;
+ u8 tmr_idx;
+ int err;
+
+ tmr_idx = ice_get_ptp_src_clock_index(hw);
+
+ err = ice_stop_phy_timer_eth56g(hw, port, false);
+ if (err)
+ return err;
+
+ ice_ptp_src_cmd(hw, ICE_PTP_NOP);
+
+ err = ice_phy_cfg_parpcs_eth56g(hw, port);
+ if (err)
+ return err;
+
+ err = ice_phy_cfg_ptp_1step_eth56g(hw, port);
+ if (err)
+ return err;
+
+ err = ice_phy_cfg_mac_eth56g(hw, port);
+ if (err)
+ return err;
+
+ lo = rd32(hw, GLTSYN_INCVAL_L(tmr_idx));
+ hi = rd32(hw, GLTSYN_INCVAL_H(tmr_idx));
+ incval = (u64)hi << 32 | lo;
+
+ err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_REG_TIMETUS_L, incval);
+ if (err)
+ return err;
+
+ err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_INIT_INCVAL);
+ if (err)
+ return err;
+
+ ice_ptp_exec_tmr_cmd(hw);
+
+ err = ice_sync_phy_timer_eth56g(hw, port);
+ if (err)
+ return err;
+
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_TX_OFFSET_READY, 1);
+ if (err)
+ return err;
+
+ err = ice_write_ptp_reg_eth56g(hw, port, PHY_REG_RX_OFFSET_READY, 1);
+ if (err)
+ return err;
+
+ ice_debug(hw, ICE_DBG_PTP, "Enabled clock on PHY port %u\n", port);
+
+ return 0;
+}
+
+/**
+ * ice_sb_access_ena_eth56g - Enable SB devices (PHY and others) access
+ * @hw: pointer to HW struct
+ * @enable: Enable or disable access
+ *
+ * Enable sideband devices (PHY and others) access.
+ */
+static void ice_sb_access_ena_eth56g(struct ice_hw *hw, bool enable)
+{
+ u32 val = rd32(hw, PF_SB_REM_DEV_CTL);
+
+ if (enable)
+ val |= BIT(eth56g_phy_0) | BIT(cgu) | BIT(eth56g_phy_1);
+ else
+ val &= ~(BIT(eth56g_phy_0) | BIT(cgu) | BIT(eth56g_phy_1));
+
+ wr32(hw, PF_SB_REM_DEV_CTL, val);
+}
+
+/**
+ * ice_ptp_init_phc_eth56g - Perform E82X specific PHC initialization
+ * @hw: pointer to HW struct
+ *
+ * Perform PHC initialization steps specific to E82X devices.
+ */
+static int ice_ptp_init_phc_eth56g(struct ice_hw *hw)
+{
+ int err;
+
+ ice_sb_access_ena_eth56g(hw, true);
+ /* Initialize the Clock Generation Unit */
+ err = ice_init_cgu_e82x(hw);
+
+ return err;
+}
+
+/**
+ * ice_ptp_read_tx_hwtstamp_status_eth56g - Get TX timestamp status
+ * @hw: pointer to the HW struct
+ * @ts_status: the timestamp mask pointer
+ *
+ * Read the PHY Tx timestamp status mask indicating which ports have Tx
+ * timestamps available.
+ */
+int ice_ptp_read_tx_hwtstamp_status_eth56g(struct ice_hw *hw, u32 *ts_status)
+{
+ const struct ice_eth56g_params *params = &hw->ptp.phy.eth56g;
+ u8 phy, mask;
+ u32 status;
+
+ mask = (1 << hw->ptp.ports_per_phy) - 1;
+ *ts_status = 0;
+
+ for (phy = 0; phy < params->num_phys; phy++) {
+ int err;
+
+ err = ice_read_phy_eth56g(hw, phy, PHY_PTP_INT_STATUS, &status);
+ if (err)
+ return err;
+
+ *ts_status |= (status & mask) << (phy * hw->ptp.ports_per_phy);
+ }
+
+ ice_debug(hw, ICE_DBG_PTP, "PHY interrupt err: %x\n", *ts_status);
+
+ return 0;
+}
+
+/**
+ * ice_get_phy_tx_tstamp_ready_eth56g - Read the Tx memory status register
+ * @hw: pointer to the HW struct
+ * @port: the PHY port to read from
+ * @tstamp_ready: contents of the Tx memory status register
+ *
+ * Read the PHY_REG_TX_MEMORY_STATUS register indicating which timestamps in
+ * the PHY are ready. A set bit means the corresponding timestamp is valid and
+ * ready to be captured from the PHY timestamp block.
+ */
+static int ice_get_phy_tx_tstamp_ready_eth56g(struct ice_hw *hw, u8 port,
+ u64 *tstamp_ready)
+{
+ int err;
+
+ err = ice_read_64b_ptp_reg_eth56g(hw, port, PHY_REG_TX_MEMORY_STATUS_L,
+ tstamp_ready);
+ if (err) {
+ ice_debug(hw, ICE_DBG_PTP, "Failed to read TX_MEMORY_STATUS for port %u, err %d\n",
+ port, err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_ptp_init_phy_e825c - initialize PHY parameters
+ * @hw: pointer to the HW struct
+ */
+static void ice_ptp_init_phy_e825c(struct ice_hw *hw)
+{
+ struct ice_ptp_hw *ptp = &hw->ptp;
+ struct ice_eth56g_params *params;
+ u8 phy;
+
+ ptp->phy_model = ICE_PHY_ETH56G;
+ params = &ptp->phy.eth56g;
+ params->onestep_ena = false;
+ params->peer_delay = 0;
+ params->sfd_ena = false;
+ params->phy_addr[0] = eth56g_phy_0;
+ params->phy_addr[1] = eth56g_phy_1;
+ params->num_phys = 2;
+ ptp->ports_per_phy = 4;
+ ptp->num_lports = params->num_phys * ptp->ports_per_phy;
+
+ ice_sb_access_ena_eth56g(hw, true);
+ for (phy = 0; phy < params->num_phys; phy++) {
+ u32 phy_rev;
+ int err;
+
+ err = ice_read_phy_eth56g(hw, phy, PHY_REG_REVISION, &phy_rev);
+ if (err || phy_rev != PHY_REVISION_ETH56G) {
+ ptp->phy_model = ICE_PHY_UNSUP;
+ return;
+ }
+ }
+}
+
/* E822 family functions
*
* The following functions operate on the E822 family of devices.
@@ -1214,15 +2844,14 @@ static int ice_ptp_set_vernier_wl(struct ice_hw *hw)
static int ice_ptp_init_phc_e82x(struct ice_hw *hw)
{
int err;
- u32 regval;
+ u32 val;
/* Enable reading switch and PHY registers over the sideband queue */
#define PF_SB_REM_DEV_CTL_SWITCH_READ BIT(1)
#define PF_SB_REM_DEV_CTL_PHY0 BIT(2)
- regval = rd32(hw, PF_SB_REM_DEV_CTL);
- regval |= (PF_SB_REM_DEV_CTL_SWITCH_READ |
- PF_SB_REM_DEV_CTL_PHY0);
- wr32(hw, PF_SB_REM_DEV_CTL, regval);
+ val = rd32(hw, PF_SB_REM_DEV_CTL);
+ val |= (PF_SB_REM_DEV_CTL_SWITCH_READ | PF_SB_REM_DEV_CTL_PHY0);
+ wr32(hw, PF_SB_REM_DEV_CTL, val);
/* Initialize the Clock Generation Unit */
err = ice_init_cgu_e82x(hw);
@@ -1449,51 +3078,17 @@ ice_ptp_read_port_capture(struct ice_hw *hw, u8 port, u64 *tx_ts, u64 *rx_ts)
*
* Prepare the requested port for an upcoming timer sync command.
*
- * Do not use this function directly. If you want to configure exactly one
- * port, use ice_ptp_one_port_cmd() instead.
+ * Note there is no equivalent of this operation on E810, as that device
+ * always handles all external PHYs internally.
*/
-static int ice_ptp_write_port_cmd_e82x(struct ice_hw *hw, u8 port,
- enum ice_ptp_tmr_cmd cmd)
+static int
+ice_ptp_write_port_cmd_e82x(struct ice_hw *hw, u8 port,
+ enum ice_ptp_tmr_cmd cmd)
{
- u32 cmd_val, val;
- u8 tmr_idx;
+ u32 val = ice_ptp_tmr_cmd_to_port_reg(hw, cmd);
int err;
- tmr_idx = ice_get_ptp_src_clock_index(hw);
- cmd_val = tmr_idx << SEL_PHY_SRC;
- switch (cmd) {
- case ICE_PTP_INIT_TIME:
- cmd_val |= PHY_CMD_INIT_TIME;
- break;
- case ICE_PTP_INIT_INCVAL:
- cmd_val |= PHY_CMD_INIT_INCVAL;
- break;
- case ICE_PTP_ADJ_TIME:
- cmd_val |= PHY_CMD_ADJ_TIME;
- break;
- case ICE_PTP_READ_TIME:
- cmd_val |= PHY_CMD_READ_TIME;
- break;
- case ICE_PTP_ADJ_TIME_AT_TIME:
- cmd_val |= PHY_CMD_ADJ_TIME_AT_TIME;
- break;
- case ICE_PTP_NOP:
- break;
- }
-
/* Tx case */
- /* Read, modify, write */
- err = ice_read_phy_reg_e82x(hw, port, P_REG_TX_TMR_CMD, &val);
- if (err) {
- ice_debug(hw, ICE_DBG_PTP, "Failed to read TX_TMR_CMD, err %d\n",
- err);
- return err;
- }
-
- /* Modify necessary bits only and perform write */
- val &= ~TS_CMD_MASK;
- val |= cmd_val;
-
err = ice_write_phy_reg_e82x(hw, port, P_REG_TX_TMR_CMD, val);
if (err) {
ice_debug(hw, ICE_DBG_PTP, "Failed to write back TX_TMR_CMD, err %d\n",
@@ -1502,19 +3097,8 @@ static int ice_ptp_write_port_cmd_e82x(struct ice_hw *hw, u8 port,
}
/* Rx case */
- /* Read, modify, write */
- err = ice_read_phy_reg_e82x(hw, port, P_REG_RX_TMR_CMD, &val);
- if (err) {
- ice_debug(hw, ICE_DBG_PTP, "Failed to read RX_TMR_CMD, err %d\n",
- err);
- return err;
- }
-
- /* Modify necessary bits only and perform write */
- val &= ~TS_CMD_MASK;
- val |= cmd_val;
-
- err = ice_write_phy_reg_e82x(hw, port, P_REG_RX_TMR_CMD, val);
+ err = ice_write_phy_reg_e82x(hw, port, P_REG_RX_TMR_CMD,
+ val | TS_CMD_RX_TYPE);
if (err) {
ice_debug(hw, ICE_DBG_PTP, "Failed to write back RX_TMR_CMD, err %d\n",
err);
@@ -1524,63 +3108,6 @@ static int ice_ptp_write_port_cmd_e82x(struct ice_hw *hw, u8 port,
return 0;
}
-/**
- * ice_ptp_one_port_cmd - Prepare one port for a timer command
- * @hw: pointer to the HW struct
- * @configured_port: the port to configure with configured_cmd
- * @configured_cmd: timer command to prepare on the configured_port
- *
- * Prepare the configured_port for the configured_cmd, and prepare all other
- * ports for ICE_PTP_NOP. This causes the configured_port to execute the
- * desired command while all other ports perform no operation.
- */
-static int
-ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port,
- enum ice_ptp_tmr_cmd configured_cmd)
-{
- u8 port;
-
- for (port = 0; port < hw->ptp.num_lports; port++) {
- enum ice_ptp_tmr_cmd cmd;
- int err;
-
- if (port == configured_port)
- cmd = configured_cmd;
- else
- cmd = ICE_PTP_NOP;
-
- err = ice_ptp_write_port_cmd_e82x(hw, port, cmd);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-/**
- * ice_ptp_port_cmd_e82x - Prepare all ports for a timer command
- * @hw: pointer to the HW struct
- * @cmd: timer command to prepare
- *
- * Prepare all ports connected to this device for an upcoming timer sync
- * command.
- */
-static int
-ice_ptp_port_cmd_e82x(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd)
-{
- u8 port;
-
- for (port = 0; port < hw->ptp.num_lports; port++) {
- int err;
-
- err = ice_ptp_write_port_cmd_e82x(hw, port, cmd);
- if (err)
- return err;
- }
-
- return 0;
-}
-
/* E822 Vernier calibration functions
*
* The following functions are used as part of the vernier calibration of
@@ -3424,10 +4951,101 @@ void ice_ptp_init_hw(struct ice_hw *hw)
ice_ptp_init_phy_e82x(ptp);
else if (ice_is_e810(hw))
ice_ptp_init_phy_e810(ptp);
+ else if (ice_is_e825c(hw))
+ ice_ptp_init_phy_e825c(hw);
else
ptp->phy_model = ICE_PHY_UNSUP;
}
+/**
+ * ice_ptp_write_port_cmd - Prepare a single PHY port for a timer command
+ * @hw: pointer to HW struct
+ * @port: Port to which cmd has to be sent
+ * @cmd: Command to be sent to the port
+ *
+ * Prepare one port for the upcoming timer sync command. Do not use this for
+ * programming only a single port, instead use ice_ptp_one_port_cmd() to
+ * ensure non-modified ports get properly initialized to ICE_PTP_NOP.
+ */
+static int ice_ptp_write_port_cmd(struct ice_hw *hw, u8 port,
+ enum ice_ptp_tmr_cmd cmd)
+{
+ switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ice_ptp_write_port_cmd_eth56g(hw, port, cmd);
+ case ICE_PHY_E82X:
+ return ice_ptp_write_port_cmd_e82x(hw, port, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * ice_ptp_one_port_cmd - Program one PHY port for a timer command
+ * @hw: pointer to HW struct
+ * @configured_port: the port that should execute the command
+ * @configured_cmd: the command to be executed on the configured port
+ *
+ * Prepare one port for executing a timer command, while preparing all other
+ * ports to ICE_PTP_NOP. This allows executing a command on a single port
+ * while ensuring all other ports do not execute stale commands.
+ */
+int ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port,
+ enum ice_ptp_tmr_cmd configured_cmd)
+{
+ u32 port;
+
+ for (port = 0; port < hw->ptp.num_lports; port++) {
+ int err;
+
+ /* Program the configured port with the configured command,
+ * program all other ports with ICE_PTP_NOP.
+ */
+ if (port == configured_port)
+ err = ice_ptp_write_port_cmd(hw, port, configured_cmd);
+ else
+ err = ice_ptp_write_port_cmd(hw, port, ICE_PTP_NOP);
+
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_ptp_port_cmd - Prepare PHY ports for a timer sync command
+ * @hw: pointer to HW struct
+ * @cmd: the timer command to setup
+ *
+ * Prepare all PHY ports on this device for the requested timer command. For
+ * some families this can be done in one shot, but for other families each
+ * port must be configured individually.
+ */
+static int ice_ptp_port_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd)
+{
+ u32 port;
+
+ /* PHY models which can program all ports simultaneously */
+ switch (hw->ptp.phy_model) {
+ case ICE_PHY_E810:
+ return ice_ptp_port_cmd_e810(hw, cmd);
+ default:
+ break;
+ }
+
+ /* PHY models which require programming each port separately */
+ for (port = 0; port < hw->ptp.num_lports; port++) {
+ int err;
+
+ err = ice_ptp_write_port_cmd(hw, port, cmd);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
/**
* ice_ptp_tmr_cmd - Prepare and trigger a timer sync command
* @hw: pointer to HW struct
@@ -3446,17 +5064,7 @@ static int ice_ptp_tmr_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd)
ice_ptp_src_cmd(hw, cmd);
/* Next, prepare the ports */
- switch (hw->ptp.phy_model) {
- case ICE_PHY_E810:
- err = ice_ptp_port_cmd_e810(hw, cmd);
- break;
- case ICE_PHY_E82X:
- err = ice_ptp_port_cmd_e82x(hw, cmd);
- break;
- default:
- err = -EOPNOTSUPP;
- }
-
+ err = ice_ptp_port_cmd(hw, cmd);
if (err) {
ice_debug(hw, ICE_DBG_PTP, "Failed to prepare PHY ports for timer command %u, err %d\n",
cmd, err);
@@ -3499,6 +5107,10 @@ int ice_ptp_init_time(struct ice_hw *hw, u64 time)
/* PHY timers */
/* Fill Rx and Tx ports and send msg to PHY */
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ err = ice_ptp_prep_phy_time_eth56g(hw,
+ (u32)(time & 0xFFFFFFFF));
+ break;
case ICE_PHY_E810:
err = ice_ptp_prep_phy_time_e810(hw, time & 0xFFFFFFFF);
break;
@@ -3541,6 +5153,9 @@ int ice_ptp_write_incval(struct ice_hw *hw, u64 incval)
wr32(hw, GLTSYN_SHADJ_H(tmr_idx), upper_32_bits(incval));
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ err = ice_ptp_prep_phy_incval_eth56g(hw, incval);
+ break;
case ICE_PHY_E810:
err = ice_ptp_prep_phy_incval_e810(hw, incval);
break;
@@ -3607,6 +5222,9 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj)
wr32(hw, GLTSYN_SHADJ_H(tmr_idx), adj);
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ err = ice_ptp_prep_phy_adj_eth56g(hw, adj);
+ break;
case ICE_PHY_E810:
err = ice_ptp_prep_phy_adj_e810(hw, adj);
break;
@@ -3637,6 +5255,8 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj)
int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp)
{
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ice_read_ptp_tstamp_eth56g(hw, block, idx, tstamp);
case ICE_PHY_E810:
return ice_read_phy_tstamp_e810(hw, block, idx, tstamp);
case ICE_PHY_E82X:
@@ -3665,6 +5285,8 @@ int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp)
int ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx)
{
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ice_clear_ptp_tstamp_eth56g(hw, block, idx);
case ICE_PHY_E810:
return ice_clear_phy_tstamp_e810(hw, block, idx);
case ICE_PHY_E82X:
@@ -3726,6 +5348,9 @@ static int ice_get_pf_c827_idx(struct ice_hw *hw, u8 *idx)
void ice_ptp_reset_ts_memory(struct ice_hw *hw)
{
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ ice_ptp_reset_ts_memory_eth56g(hw);
+ break;
case ICE_PHY_E82X:
ice_ptp_reset_ts_memory_e82x(hw);
break;
@@ -3752,6 +5377,8 @@ int ice_ptp_init_phc(struct ice_hw *hw)
(void)rd32(hw, GLTSYN_STAT(src_idx));
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ice_ptp_init_phc_eth56g(hw);
case ICE_PHY_E810:
return ice_ptp_init_phc_e810(hw);
case ICE_PHY_E82X:
@@ -3775,6 +5402,9 @@ int ice_ptp_init_phc(struct ice_hw *hw)
int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready)
{
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ice_get_phy_tx_tstamp_ready_eth56g(hw, block,
+ tstamp_ready);
case ICE_PHY_E810:
return ice_get_phy_tx_tstamp_ready_e810(hw, block,
tstamp_ready);
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
index d477d334b1d8..4cff4ffac32f 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
@@ -41,6 +41,41 @@ enum ice_ptp_fec_mode {
ICE_PTP_FEC_MODE_RS_FEC
};
+enum eth56g_res_type {
+ ETH56G_PHY_REG_PTP,
+ ETH56G_PHY_MEM_PTP,
+ ETH56G_PHY_REG_XPCS,
+ ETH56G_PHY_REG_MAC,
+ ETH56G_PHY_REG_GPCS,
+ NUM_ETH56G_PHY_RES
+};
+
+enum ice_eth56g_link_spd {
+ ICE_ETH56G_LNK_SPD_1G,
+ ICE_ETH56G_LNK_SPD_2_5G,
+ ICE_ETH56G_LNK_SPD_10G,
+ ICE_ETH56G_LNK_SPD_25G,
+ ICE_ETH56G_LNK_SPD_40G,
+ ICE_ETH56G_LNK_SPD_50G,
+ ICE_ETH56G_LNK_SPD_50G2,
+ ICE_ETH56G_LNK_SPD_100G,
+ ICE_ETH56G_LNK_SPD_100G2,
+ NUM_ICE_ETH56G_LNK_SPD /* Must be last */
+};
+
+/**
+ * struct ice_phy_reg_info_eth56g
+ * @base: base address for each PHY block
+ * @step: step between PHY lanes
+ *
+ * Characteristic information for the various PHY register parameters in the
+ * ETH56G devices
+ */
+struct ice_phy_reg_info_eth56g {
+ u32 base[NUM_ETH56G_PHY_RES];
+ u32 step;
+};
+
/**
* struct ice_time_ref_info_e82x
* @pll_freq: Frequency of PLL that drives timer ticks in Hz
@@ -94,6 +129,74 @@ struct ice_vernier_info_e82x {
u32 rx_fixed_delay;
};
+#define ICE_ETH56G_MAC_CFG_RX_OFFSET_INT GENMASK(19, 9)
+#define ICE_ETH56G_MAC_CFG_RX_OFFSET_FRAC GENMASK(8, 0)
+#define ICE_ETH56G_MAC_CFG_FRAC_W 9
+/**
+ * struct ice_eth56g_mac_reg_cfg
+ * @tx_mode: Tx timestamp compensation mode
+ * @tx_mk_dly: Tx timestamp marker start strobe delay
+ * @tx_cw_dly: Tx timestamp codeword start strobe delay
+ * @rx_mode: Rx timestamp compensation mode
+ * @rx_mk_dly: Rx timestamp marker start strobe delay
+ * @rx_cw_dly: Rx timestamp codeword start strobe delay
+ * @blks_per_clk: number of blocks transferred per clock cycle
+ * @blktime: block time, fixed point
+ * @mktime: marker time, fixed point
+ * @tx_offset: total Tx offset, fixed point
+ * @rx_offset: total Rx offset, contains value for bitslip/deskew, fixed point
+ *
+ * MAC config values for specific PTP registers.
+ * All fixed point registers except Rx offset are 23 bit unsigned ints with
+ * a 9 bit fractional.
+ * Rx offset is 11 bit unsigned int with a 9 bit fractional.
+ */
+struct ice_eth56g_mac_reg_cfg {
+ struct {
+ u8 def;
+ u8 rs;
+ } tx_mode;
+ u8 tx_mk_dly;
+ struct {
+ u8 def;
+ u8 onestep;
+ } tx_cw_dly;
+ struct {
+ u8 def;
+ u8 rs;
+ } rx_mode;
+ struct {
+ u8 def;
+ u8 rs;
+ } rx_mk_dly;
+ struct {
+ u8 def;
+ u8 rs;
+ } rx_cw_dly;
+ u8 blks_per_clk;
+ u16 blktime;
+ u16 mktime;
+ struct {
+ u32 serdes;
+ u32 no_fec;
+ u32 fc;
+ u32 rs;
+ u32 sfd;
+ u32 onestep;
+ } tx_offset;
+ struct {
+ u32 serdes;
+ u32 no_fec;
+ u32 fc;
+ u32 rs;
+ u32 sfd;
+ u32 bs_ds;
+ } rx_offset;
+};
+
+extern
+const struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD];
+
/**
* struct ice_cgu_pll_params_e82x
* @refclk_pre_div: Reference clock pre-divisor
@@ -188,6 +291,9 @@ ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ];
#define E810C_QSFP_C827_0_HANDLE 2
#define E810C_QSFP_C827_1_HANDLE 3
+/* Table of constants related to possible ETH56G PHY resources */
+extern const struct ice_phy_reg_info_eth56g eth56g_phy_res[NUM_ETH56G_PHY_RES];
+
/* Table of constants related to possible TIME_REF sources */
extern const struct ice_time_ref_info_e82x e822_time_ref[NUM_ICE_TIME_REF_FREQ];
@@ -197,7 +303,9 @@ extern const struct ice_vernier_info_e82x e822_vernier[NUM_ICE_PTP_LNK_SPD];
/* Increment value to generate nanoseconds in the GLTSYN_TIME_L register for
* the E810 devices. Based off of a PLL with an 812.5 MHz frequency.
*/
-#define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL
+#define ICE_E810_PLL_FREQ 812500000
+#define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL
+#define E810_OUT_PROP_DELAY_NS 1
/* Device agnostic functions */
u8 ice_get_ptp_src_clock_index(struct ice_hw *hw);
@@ -215,6 +323,8 @@ void ice_ptp_reset_ts_memory(struct ice_hw *hw);
int ice_ptp_init_phc(struct ice_hw *hw);
void ice_ptp_init_hw(struct ice_hw *hw);
int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready);
+int ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port,
+ enum ice_ptp_tmr_cmd configured_cmd);
/* E822 family functions */
int ice_read_quad_reg_e82x(struct ice_hw *hw, u8 quad, u16 offset, u32 *val);
@@ -285,9 +395,26 @@ int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num);
int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
unsigned long *caps);
+/* ETH56G family functions */
+int ice_ptp_read_tx_hwtstamp_status_eth56g(struct ice_hw *hw, u32 *ts_status);
+int ice_stop_phy_timer_eth56g(struct ice_hw *hw, u8 port, bool soft_reset);
+int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_tx_offset_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_rx_offset_eth56g(struct ice_hw *hw, u8 port);
+int ice_phy_cfg_intr_eth56g(struct ice_hw *hw, u8 port, bool ena, u8 threshold);
+int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port);
+
+#define ICE_ETH56G_NOMINAL_INCVAL 0x140000000ULL
+#define ICE_ETH56G_NOMINAL_PCS_REF_TUS 0x100000000ULL
+#define ICE_ETH56G_NOMINAL_PCS_REF_INC 0x300000000ULL
+#define ICE_ETH56G_NOMINAL_THRESH4 0x7777
+#define ICE_ETH56G_NOMINAL_TX_THRESH 0x6
+
static inline u64 ice_get_base_incval(struct ice_hw *hw)
{
switch (hw->ptp.phy_model) {
+ case ICE_PHY_ETH56G:
+ return ICE_ETH56G_NOMINAL_INCVAL;
case ICE_PHY_E810:
return ICE_PTP_NOMINAL_INCVAL_E810;
case ICE_PHY_E82X:
@@ -324,6 +451,7 @@ static inline u64 ice_get_base_incval(struct ice_hw *hw)
#define TS_CMD_MASK_E810 0xFF
#define TS_CMD_MASK 0xF
#define SYNC_EXEC_CMD 0x3
+#define TS_CMD_RX_TYPE ICE_M(0x18, 0x4)
/* Macros to derive port low and high addresses on both quads */
#define P_Q0_L(a, p) ((((a) + (0x2000 * (p)))) & 0xFFFF)
@@ -558,4 +686,115 @@ static inline u64 ice_get_base_incval(struct ice_hw *hw)
/* E810T PCA9575 IO controller pin control */
#define ICE_E810T_P0_GNSS_PRSNT_N BIT(4)
+/* ETH56G PHY register addresses */
+/* Timestamp PHY incval registers */
+#define PHY_REG_TIMETUS_L 0x8
+#define PHY_REG_TIMETUS_U 0xC
+
+/* Timestamp PCS registers */
+#define PHY_PCS_REF_TUS_L 0x18
+#define PHY_PCS_REF_TUS_U 0x1C
+
+/* Timestamp PCS ref incval registers */
+#define PHY_PCS_REF_INC_L 0x20
+#define PHY_PCS_REF_INC_U 0x24
+
+/* Timestamp init registers */
+#define PHY_REG_RX_TIMER_INC_PRE_L 0x64
+#define PHY_REG_RX_TIMER_INC_PRE_U 0x68
+#define PHY_REG_TX_TIMER_INC_PRE_L 0x44
+#define PHY_REG_TX_TIMER_INC_PRE_U 0x48
+
+/* Timestamp match and adjust target registers */
+#define PHY_REG_RX_TIMER_CNT_ADJ_L 0x6C
+#define PHY_REG_RX_TIMER_CNT_ADJ_U 0x70
+#define PHY_REG_TX_TIMER_CNT_ADJ_L 0x4C
+#define PHY_REG_TX_TIMER_CNT_ADJ_U 0x50
+
+/* Timestamp command registers */
+#define PHY_REG_TX_TMR_CMD 0x40
+#define PHY_REG_RX_TMR_CMD 0x60
+
+/* Phy offset ready registers */
+#define PHY_REG_TX_OFFSET_READY 0x54
+#define PHY_REG_RX_OFFSET_READY 0x74
+
+/* Phy total offset registers */
+#define PHY_REG_TOTAL_TX_OFFSET_L 0x38
+#define PHY_REG_TOTAL_TX_OFFSET_U 0x3C
+#define PHY_REG_TOTAL_RX_OFFSET_L 0x58
+#define PHY_REG_TOTAL_RX_OFFSET_U 0x5C
+
+/* Timestamp capture registers */
+#define PHY_REG_TX_CAPTURE_L 0x78
+#define PHY_REG_TX_CAPTURE_U 0x7C
+#define PHY_REG_RX_CAPTURE_L 0x8C
+#define PHY_REG_RX_CAPTURE_U 0x90
+
+/* Memory status registers */
+#define PHY_REG_TX_MEMORY_STATUS_L 0x80
+#define PHY_REG_TX_MEMORY_STATUS_U 0x84
+
+/* Interrupt config register */
+#define PHY_REG_TS_INT_CONFIG 0x88
+
+/* XIF mode config register */
+#define PHY_MAC_XIF_MODE 0x24
+#define PHY_MAC_XIF_1STEP_ENA_M ICE_M(0x1, 5)
+#define PHY_MAC_XIF_TS_BIN_MODE_M ICE_M(0x1, 11)
+#define PHY_MAC_XIF_TS_SFD_ENA_M ICE_M(0x1, 20)
+#define PHY_MAC_XIF_GMII_TS_SEL_M ICE_M(0x1, 21)
+
+/* GPCS config register */
+#define PHY_GPCS_CONFIG_REG0 0x268
+#define PHY_GPCS_CONFIG_REG0_TX_THR_M ICE_M(0xF, 24)
+#define PHY_GPCS_BITSLIP 0x5C
+
+#define PHY_TS_INT_CONFIG_THRESHOLD_M ICE_M(0x3F, 0)
+#define PHY_TS_INT_CONFIG_ENA_M BIT(6)
+
+/* 1-step PTP config */
+#define PHY_PTP_1STEP_CONFIG 0x270
+#define PHY_PTP_1STEP_T1S_UP64_M ICE_M(0xF, 4)
+#define PHY_PTP_1STEP_T1S_DELTA_M ICE_M(0xF, 8)
+#define PHY_PTP_1STEP_PEER_DELAY(_port) (0x274 + 4 * (_port))
+#define PHY_PTP_1STEP_PD_ADD_PD_M ICE_M(0x1, 0)
+#define PHY_PTP_1STEP_PD_DELAY_M ICE_M(0x3fffffff, 1)
+#define PHY_PTP_1STEP_PD_DLY_V_M ICE_M(0x1, 31)
+
+/* Macros to derive offsets for TimeStampLow and TimeStampHigh */
+#define PHY_TSTAMP_L(x) (((x) * 8) + 0)
+#define PHY_TSTAMP_U(x) (((x) * 8) + 4)
+
+#define PHY_REG_REVISION 0x85000
+
+#define PHY_REG_DESKEW_0 0x94
+#define PHY_REG_DESKEW_0_RLEVEL GENMASK(6, 0)
+#define PHY_REG_DESKEW_0_RLEVEL_FRAC GENMASK(9, 7)
+#define PHY_REG_DESKEW_0_RLEVEL_FRAC_W 3
+#define PHY_REG_DESKEW_0_VALID GENMASK(10, 10)
+
+#define PHY_REG_GPCS_BITSLIP 0x5C
+#define PHY_REG_SD_BIT_SLIP(_port_offset) (0x29C + 4 * (_port_offset))
+#define PHY_REVISION_ETH56G 0x10200
+#define PHY_VENDOR_TXLANE_THRESH 0x2000C
+
+#define PHY_MAC_TSU_CONFIG 0x40
+#define PHY_MAC_TSU_CFG_RX_MODE_M ICE_M(0x7, 0)
+#define PHY_MAC_TSU_CFG_RX_MII_CW_DLY_M ICE_M(0x7, 4)
+#define PHY_MAC_TSU_CFG_RX_MII_MK_DLY_M ICE_M(0x7, 8)
+#define PHY_MAC_TSU_CFG_TX_MODE_M ICE_M(0x7, 12)
+#define PHY_MAC_TSU_CFG_TX_MII_CW_DLY_M ICE_M(0x1F, 16)
+#define PHY_MAC_TSU_CFG_TX_MII_MK_DLY_M ICE_M(0x1F, 21)
+#define PHY_MAC_TSU_CFG_BLKS_PER_CLK_M ICE_M(0x1, 28)
+#define PHY_MAC_RX_MODULO 0x44
+#define PHY_MAC_RX_OFFSET 0x48
+#define PHY_MAC_RX_OFFSET_M ICE_M(0xFFFFFF, 0)
+#define PHY_MAC_TX_MODULO 0x4C
+#define PHY_MAC_BLOCKTIME 0x50
+#define PHY_MAC_MARKERTIME 0x54
+#define PHY_MAC_TX_OFFSET 0x58
+
+#define PHY_PTP_INT_STATUS 0x7FD140
+
#endif /* _ICE_PTP_HW_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h b/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h
index ead75fe2bcda..3b0054faf70c 100644
--- a/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_sbq_cmd.h
@@ -47,10 +47,12 @@ struct ice_sbq_evt_desc {
};
enum ice_sbq_msg_dev {
- rmn_0 = 0x02,
- rmn_1 = 0x03,
- rmn_2 = 0x04,
- cgu = 0x06
+ eth56g_phy_0 = 0x02,
+ rmn_0 = 0x02,
+ rmn_1 = 0x03,
+ rmn_2 = 0x04,
+ cgu = 0x06,
+ eth56g_phy_1 = 0x0D,
};
enum ice_sbq_msg_opcode {
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 5802009ed0c6..ccf50df50fcd 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -320,7 +320,9 @@ enum ice_time_ref_freq {
ICE_TIME_REF_FREQ_156_250 = 4,
ICE_TIME_REF_FREQ_245_760 = 5,
- NUM_ICE_TIME_REF_FREQ
+ NUM_ICE_TIME_REF_FREQ,
+
+ ICE_TIME_REF_FREQ_INVALID = -1,
};
/* Clock source specification */
@@ -819,15 +821,29 @@ struct ice_mbx_data {
#define ICE_PORTS_PER_QUAD 4
#define ICE_GET_QUAD_NUM(port) ((port) / ICE_PORTS_PER_QUAD)
+struct ice_eth56g_params {
+ u8 num_phys;
+ u8 phy_addr[2];
+ bool onestep_ena;
+ bool sfd_ena;
+ u32 peer_delay;
+};
+
+union ice_phy_params {
+ struct ice_eth56g_params eth56g;
+};
+
/* PHY model */
enum ice_phy_model {
ICE_PHY_UNSUP = -1,
- ICE_PHY_E810 = 1,
+ ICE_PHY_E810 = 1,
ICE_PHY_E82X,
+ ICE_PHY_ETH56G,
};
struct ice_ptp_hw {
enum ice_phy_model phy_model;
+ union ice_phy_params phy;
u8 num_lports;
u8 ports_per_phy;
};
--
2.43.0
Powered by blists - more mailing lists