Message-Id: <20240405111831.3881080-2-schnelle@linux.ibm.com>
Date: Fri,  5 Apr 2024 13:18:31 +0200
From: Niklas Schnelle <schnelle@...ux.ibm.com>
To: "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Paolo Abeni <pabeni@...hat.com>
Cc: Michael Grzeschik <m.grzeschik@...gutronix.de>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        Vincent Mailhol <mailhol.vincent@...adoo.fr>, netdev@...r.kernel.org,
        linux-can@...r.kernel.org, intel-wired-lan@...ts.osuosl.org,
        linux-hams@...r.kernel.org, Arnd Bergmann <arnd@...nel.org>,
        Heiko Carstens <hca@...ux.ibm.com>, linux-kernel@...r.kernel.org,
        Niklas Schnelle <schnelle@...ux.ibm.com>
Subject: [PATCH net-next 1/1] net: handle HAS_IOPORT dependencies

In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for
those drivers requiring them. For the DEFXX driver the use of I/O
ports is optional and we only need to fence specific code paths. It also
turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need
the !S390 dependency and successfully builds the bpqether driver.

Acked-by: Marc Kleine-Budde <mkl@...gutronix.de>
Acked-by: Jakub Kicinski <kuba@...nel.org>
Acked-by: Maciej W. Rozycki <macro@...am.me.uk>
Co-developed-by: Arnd Bergmann <arnd@...nel.org>
Signed-off-by: Arnd Bergmann <arnd@...nel.org>
Signed-off-by: Niklas Schnelle <schnelle@...ux.ibm.com>
---
Note: This patch does not depend any not-yet-mainline HAS_IOPORT changes
and may be merged via subsystem specific trees at your earliest
convenience.

 drivers/net/Kconfig                  | 2 +-
 drivers/net/arcnet/Kconfig           | 2 +-
 drivers/net/can/cc770/Kconfig        | 1 +
 drivers/net/can/sja1000/Kconfig      | 1 +
 drivers/net/ethernet/3com/Kconfig    | 4 ++--
 drivers/net/ethernet/8390/Kconfig    | 6 +++---
 drivers/net/ethernet/amd/Kconfig     | 4 ++--
 drivers/net/ethernet/fujitsu/Kconfig | 2 +-
 drivers/net/ethernet/intel/Kconfig   | 2 +-
 drivers/net/ethernet/sis/Kconfig     | 4 ++--
 drivers/net/ethernet/smsc/Kconfig    | 2 +-
 drivers/net/ethernet/ti/Kconfig      | 2 +-
 drivers/net/ethernet/via/Kconfig     | 1 +
 drivers/net/ethernet/xircom/Kconfig  | 2 +-
 drivers/net/fddi/defxx.c             | 2 +-
 drivers/net/hamradio/Kconfig         | 6 +++---
 drivers/net/wan/Kconfig              | 2 +-
 net/ax25/Kconfig                     | 2 +-
 18 files changed, 25 insertions(+), 22 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8ca0bc223b30..82a1e77ce57a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -507,7 +507,7 @@ source "drivers/net/ipa/Kconfig"
 
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
-	depends on PNP
+	depends on ISA && PNP
 	help
 	  This is a driver for the General Instrument (also known as
 	  NextLevel) SURFboard 1000 internal
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index a51b9dab6d3a..d1d07a1d4fbc 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -4,7 +4,7 @@
 #
 
 menuconfig ARCNET
-	depends on NETDEVICES && (ISA || PCI || PCMCIA)
+	depends on NETDEVICES && (ISA || PCI || PCMCIA) && HAS_IOPORT
 	tristate "ARCnet support"
 	help
 	  If you have a network card of this type, say Y and check out the
diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig
index 9ef1359319f0..467ef19de1c1 100644
--- a/drivers/net/can/cc770/Kconfig
+++ b/drivers/net/can/cc770/Kconfig
@@ -7,6 +7,7 @@ if CAN_CC770
 
 config CAN_CC770_ISA
 	tristate "ISA Bus based legacy CC770 driver"
+	depends on ISA
 	help
 	  This driver adds legacy support for CC770 and AN82527 chips
 	  connected to the ISA bus using I/O port, memory mapped or
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 4b2f9cb17fc3..01168db4c106 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -87,6 +87,7 @@ config CAN_PLX_PCI
 
 config CAN_SJA1000_ISA
 	tristate "ISA Bus based legacy SJA1000 driver"
+	depends on ISA
 	help
 	  This driver adds legacy support for SJA1000 chips connected to
 	  the ISA bus using I/O port, memory mapped or indirect access.
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 706bd59bf645..1fbab79e2be4 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -44,7 +44,7 @@ config 3C515
 
 config PCMCIA_3C574
 	tristate "3Com 3c574 PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	help
 	  Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.
@@ -54,7 +54,7 @@ config PCMCIA_3C574
 
 config PCMCIA_3C589
 	tristate "3Com 3c589 PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	help
 	  Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
 	  (PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342..345f250781c6 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_8390
 
 config PCMCIA_AXNET
 	tristate "Asix AX88190 PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	help
 	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
 	  (PC-card) Fast Ethernet card to your computer.  These cards are
@@ -117,7 +117,7 @@ config NE2000
 
 config NE2K_PCI
 	tristate "PCI NE2000 and clones support (see help)"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select CRC32
 	help
 	  This driver is for NE2000 compatible PCI cards. It will not work
@@ -146,7 +146,7 @@ config APNE
 
 config PCMCIA_PCNET
 	tristate "NE2000 compatible PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	select CRC32
 	help
 	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index f8cc8925161c..b39c6f3e1eda 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -56,7 +56,7 @@ config LANCE
 
 config PCNET32
 	tristate "AMD PCnet32 PCI support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select CRC32
 	select MII
 	help
@@ -122,7 +122,7 @@ config MVME147_NET
 
 config PCMCIA_NMCLAN
 	tristate "New Media PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	help
 	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
 	  PCMCIA (PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index 0a1400cb410a..06a28bce5d27 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -18,7 +18,7 @@ if NET_VENDOR_FUJITSU
 
 config PCMCIA_FMVJ18X
 	tristate "Fujitsu FMV-J18x PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	select CRC32
 	help
 	  Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 639fbb12bd35..6e7901e12699 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -41,7 +41,7 @@ config E100
 
 config E1000
 	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	help
 	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
 	  adapters.  For more information on how to identify your adapter, go
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index 775d76d9890e..7e498bdbca73 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_SIS
 
 config SIS900
 	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select CRC32
 	select MII
 	help
@@ -35,7 +35,7 @@ config SIS900
 
 config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
-	depends on PCI
+	depends on PCI && HAS_IOPORT
 	select CRC32
 	select MII
 	help
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 5f22a8a4d27b..13ce9086a9ca 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -54,7 +54,7 @@ config SMC91X
 
 config PCMCIA_SMC91C92
 	tristate "SMC 91Cxx PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	select CRC32
 	select MII
 	help
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 1530d13984d4..cfe9bd6b1d62 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -167,7 +167,7 @@ config TI_KEYSTONE_NETCP_ETHSS
 
 config TLAN
 	tristate "TI ThunderLAN support"
-	depends on (PCI || EISA)
+	depends on (PCI || EISA) && HAS_IOPORT
 	help
 	  If you have a PCI Ethernet network card based on the ThunderLAN chip
 	  which is supported by this driver, say Y here.
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index da287ef65be7..00773f5e4d7e 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -20,6 +20,7 @@ config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
 	depends on PCI || ARCH_VT8500 || COMPILE_TEST
+	depends on HAS_IOPORT
 	depends on HAS_DMA
 	select CRC32
 	select MII
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
index 7497b9bea511..bfbdcf758afb 100644
--- a/drivers/net/ethernet/xircom/Kconfig
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_XIRCOM
 
 config PCMCIA_XIRC2PS
 	tristate "Xircom 16-bit PCMCIA support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	help
 	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
 	  Ethernet or Fast Ethernet card to your computer.
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index 1fef8a9b1a0f..0fbbb7286008 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -254,7 +254,7 @@ static const char version[] =
 #define DFX_BUS_TC(dev) 0
 #endif
 
-#if defined(CONFIG_EISA) || defined(CONFIG_PCI)
+#ifdef CONFIG_HAS_IOPORT
 #define dfx_use_mmio bp->mmio
 #else
 #define dfx_use_mmio true
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 25b1f929c422..36a9aade9f33 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -83,7 +83,7 @@ config SCC_TRXECHO
 
 config BAYCOM_SER_FDX
 	tristate "BAYCOM ser12 fullduplex driver for AX.25"
-	depends on AX25 && !S390
+	depends on AX25 && HAS_IOPORT
 	select CRC_CCITT
 	help
 	  This is one of two drivers for Baycom style simple amateur radio
@@ -103,7 +103,7 @@ config BAYCOM_SER_FDX
 
 config BAYCOM_SER_HDX
 	tristate "BAYCOM ser12 halfduplex driver for AX.25"
-	depends on AX25 && !S390
+	depends on AX25 && HAS_IOPORT
 	select CRC_CCITT
 	help
 	  This is one of two drivers for Baycom style simple amateur radio
@@ -150,7 +150,7 @@ config BAYCOM_EPP
 
 config YAM
 	tristate "YAM driver for AX.25"
-	depends on AX25 && !S390
+	depends on AX25 && HAS_IOPORT
 	help
 	  The YAM is a modem for packet radio which connects to the serial
 	  port and includes some of the functions of a Terminal Node
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 31ab2136cdf1..67be9857c86c 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -180,7 +180,7 @@ config C101
 
 config FARSYNC
 	tristate "FarSync T-Series support"
-	depends on HDLC && PCI
+	depends on HDLC && PCI && HAS_IOPORT
 	help
 	  Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
 	  FarSite Communications Ltd.
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index fdb666607f10..e23a3dc14b93 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -4,7 +4,7 @@
 #
 
 menuconfig HAMRADIO
-	depends on NET && !S390
+	depends on NET
 	bool "Amateur Radio support"
 	help
 	  If you want to connect your Linux box to an amateur radio, answer Y
-- 
2.40.1

Powered by blists - more mailing lists