| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240406-lan78xx-eee-v1-1-2993b14b849c@lunn.ch>
Date: Sat, 06 Apr 2024 15:15:59 -0500
From: Andrew Lunn <andrew@...n.ch>
To: Woojung Huh <woojung.huh@...rochip.com>, UNGLinuxDriver@...rochip.com,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Bryan Whitehead <bryan.whitehead@...rochip.com>
Cc: Heiner Kallweit <hkallweit1@...il.com>,
Oleksij Rempel <o.rempel@...gutronix.de>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next 1/2] net: usb: lan78xx: Fixup EEE
The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into
lan783xx_phy_link_status_change() which gets called by phylib when
there is a change in link status.
lan78xx_set_eee() now just programs the hardware with the LPI
timer value, and passed everything else to phylib, so it can correctly
setup the PHY.
lan743x_get_eee() relies on phylib doing most of the work, the
MAC driver just adds the LPI timer value.
Call phy_support_eee() to indicate the MAC does actually support EEE.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/usb/lan78xx.c | 42 ++++++++++++++++++++++--------------------
1 file changed, 22 insertions(+), 20 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 80ee4fcdfb36..0030be502daa 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1692,15 +1692,10 @@ static int lan78xx_get_eee(struct net_device *net, struct ethtool_keee *edata)
ret = lan78xx_read_reg(dev, MAC_CR, &buf);
if (buf & MAC_CR_EEE_EN_) {
- edata->eee_enabled = true;
- edata->tx_lpi_enabled = true;
/* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */
ret = lan78xx_read_reg(dev, EEE_TX_LPI_REQ_DLY, &buf);
edata->tx_lpi_timer = buf;
} else {
- edata->eee_enabled = false;
- edata->eee_active = false;
- edata->tx_lpi_enabled = false;
edata->tx_lpi_timer = 0;
}
@@ -1721,24 +1716,16 @@ static int lan78xx_set_eee(struct net_device *net, struct ethtool_keee *edata)
if (ret < 0)
return ret;
- if (edata->eee_enabled) {
- ret = lan78xx_read_reg(dev, MAC_CR, &buf);
- buf |= MAC_CR_EEE_EN_;
- ret = lan78xx_write_reg(dev, MAC_CR, buf);
-
- phy_ethtool_set_eee(net->phydev, edata);
-
- buf = (u32)edata->tx_lpi_timer;
- ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf);
- } else {
- ret = lan78xx_read_reg(dev, MAC_CR, &buf);
- buf &= ~MAC_CR_EEE_EN_;
- ret = lan78xx_write_reg(dev, MAC_CR, buf);
- }
+ ret = phy_ethtool_set_eee(net->phydev, edata);
+ if (ret < 0)
+ goto out;
+ buf = (u32)edata->tx_lpi_timer;
+ ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf);
+out:
usb_autopm_put_interface(dev->intf);
- return 0;
+ return ret;
}
static u32 lan78xx_get_link(struct net_device *net)
@@ -2114,7 +2101,20 @@ static void lan78xx_remove_mdio(struct lan78xx_net *dev)
static void lan78xx_link_status_change(struct net_device *net)
{
+ struct lan78xx_net *dev = netdev_priv(net);
struct phy_device *phydev = net->phydev;
+ u32 data;
+ int ret;
+
+ ret = lan78xx_read_reg(dev, MAC_CR, &data);
+ if (ret < 0)
+ return;
+
+ if (phydev->enable_tx_lpi)
+ data |= MAC_CR_EEE_EN_;
+ else
+ data &= ~MAC_CR_EEE_EN_;
+ lan78xx_write_reg(dev, MAC_CR, data);
phy_print_status(phydev);
}
@@ -2408,6 +2408,8 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
mii_adv_to_linkmode_adv_t(fc, mii_adv);
linkmode_or(phydev->advertising, fc, phydev->advertising);
+ phy_support_eee(phydev);
+
if (phydev->mdio.dev.of_node) {
u32 reg;
int len;
--
2.43.0
Powered by blists - more mailing lists