Message-Id: <77daabe9ca5c62168d9e54a81b5822e9b898eeb3.1712668711.git.siyanteng@loongson.cn>
Date: Tue,  9 Apr 2024 22:04:34 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	peppe.cavallaro@...com,
	alexandre.torgue@...s.st.com,
	joabreu@...opsys.com,
	fancer.lancer@...il.com
Cc: Yanteng Si <siyanteng@...ngson.cn>,
	Jose.Abreu@...opsys.com,
	chenhuacai@...nel.org,
	linux@...linux.org.uk,
	guyinggang@...ngson.cn,
	netdev@...r.kernel.org,
	chris.chenfeiyang@...il.com,
	siyanteng01@...il.com
Subject: [PATCH net-next v10 6/6] net: stmmac: dwmac-loongson: Add Loongson GNET support

There are two types of Loongson DWGMAC. The first type shares the same
register definitions and has similar logic as dwmac1000. The second type
uses several different register definitions, we think it is necessary to
distinguish rx and tx, so we split these bits into two.

Simply put, we split some single bit fields into double bits fileds:

     Name              Tx          Rx

DMA_INTR_ENA_NIE = 0x00040000 | 0x00020000;
DMA_INTR_ENA_AIE = 0x00010000 | 0x00008000;
DMA_STATUS_NIS   = 0x00040000 | 0x00020000;
DMA_STATUS_AIS   = 0x00010000 | 0x00008000;
DMA_STATUS_FBI   = 0x00002000 | 0x00001000;

Therefore, when using, TX and RX must be set at the same time.

How to use them:
 1. Create the Loongson GNET-specific
 stmmac_dma_ops.dma_interrupt()
 stmmac_dma_ops.init_chan()
 methods in the dwmac-loongson.c driver. Adding all the
 Loongson-specific macros

 2. Create a Loongson GNET-specific platform setup method with the next
 semantics:
    + allocate stmmac_dma_ops instance and initialize it with
      dwmac1000_dma_ops.
    + override the stmmac_dma_ops.{dma_interrupt, init_chan} with
      the pointers to the methods defined in 2.
    + allocate mac_device_info instance and initialize the
      mac_device_info.dma field with a pointer to the new
      stmmac_dma_ops instance.
    + initialize mac_device_info in a way it's done in
      dwmac1000_setup().

 3. Initialize plat_stmmacenet_data.setup() with the pointer to the
 method created in 2.

GNET features:

 Speeds: 10/100/1000Mbps
 DMA-descriptors type: normal and enhanced
 L3/L4 filters availability: support
 VLAN hash table filter: support
 PHY-interface: GMII
 Remote Wake-up support: support
 Mac Management Counters (MMC): support
 DMA chennel number: 0x10 device is 8 and 0x37 device is 1

Others:
GNET integrates both MAC and PHY chips inside.
GNET device: LS2K2000, LS7A2000, the chip connection between the mac and
             phy of these devices is not normal and requires two rounds of
             negotiation; LS7A2000 does not support half-duplex and
             multi-channel;

             To enable multi-channel on LS2K2000, you need to turn off
             hardware checksum.

**Note**: Currently, onnly the LS2K2000's IP core is 0x10, while the IP
cores of other devices are 0x37.

Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
---
 drivers/net/ethernet/stmicro/stmmac/common.h  |   2 +
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 502 ++++++++++++++++--
 .../ethernet/stmicro/stmmac/dwmac1000_dma.c   |   1 +
 include/linux/stmmac.h                        |   1 +
 4 files changed, 465 insertions(+), 41 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 9cd62b2110a1..6777dc997e9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -29,6 +29,7 @@
 /* Synopsys Core versions */
 #define	DWMAC_CORE_3_40		0x34
 #define	DWMAC_CORE_3_50		0x35
+#define	DWMAC_CORE_3_70		0x37
 #define	DWMAC_CORE_4_00		0x40
 #define DWMAC_CORE_4_10		0x41
 #define DWMAC_CORE_5_00		0x50
@@ -258,6 +259,7 @@ struct stmmac_safety_stats {
 #define CSR_F_300M	300000000
 
 #define	MAC_CSR_H_FRQ_MASK	0x20
+#define	MAC_CTRL_PORT_SELECT_10_100	BIT(15)
 
 #define HASH_TABLE_SIZE 64
 #define PAUSE_TIME 0xffff
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 69078eb1f923..e05d7ca6cfe4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -8,8 +8,69 @@
 #include <linux/device.h>
 #include <linux/of_irq.h>
 #include "stmmac.h"
+#include "dwmac_dma.h"
+#include "dwmac1000.h"
+
+/* Normal Loongson Tx Summary */
+#define DMA_INTR_ENA_NIE_TX_LOONGSON	0x00040000
+/* Normal Loongson Rx Summary */
+#define DMA_INTR_ENA_NIE_RX_LOONGSON	0x00020000
+#define DMA_INTR_NORMAL_LOONGSON	(DMA_INTR_ENA_NIE_TX_LOONGSON | \
+					 DMA_INTR_ENA_NIE_RX_LOONGSON | \
+					 DMA_INTR_ENA_RIE | DMA_INTR_ENA_TIE)
+
+/* Abnormal Loongson Tx Summary */
+#define DMA_INTR_ENA_AIE_TX_LOONGSON	0x00010000
+/* Abnormal Loongson Rx Summary */
+#define DMA_INTR_ENA_AIE_RX_LOONGSON	0x00008000
+
+#define DMA_INTR_ABNORMAL_LOONGSON	(DMA_INTR_ENA_AIE_TX_LOONGSON | \
+					 DMA_INTR_ENA_AIE_RX_LOONGSON | \
+					 DMA_INTR_ENA_FBE | DMA_INTR_ENA_UNE)
+
+#define DMA_INTR_DEFAULT_MASK_LOONGSON	(DMA_INTR_NORMAL_LOONGSON | \
+					 DMA_INTR_ABNORMAL_LOONGSON)
+
+/* Normal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_NIS_TX_LOONGSON	0x00040000
+/* Normal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_NIS_RX_LOONGSON	0x00020000
+
+/* Abnormal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_AIS_TX_LOONGSON	0x00010000
+/* Abnormal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_AIS_RX_LOONGSON	0x00008000
+
+/* Fatal Loongson Tx Bus Error Interrupt */
+#define DMA_STATUS_FBI_TX_LOONGSON	0x00002000
+/* Fatal Loongson Rx Bus Error Interrupt */
+#define DMA_STATUS_FBI_RX_LOONGSON	0x00001000
+
+#define DMA_STATUS_MSK_COMMON_LOONGSON	(DMA_STATUS_NIS_TX_LOONGSON | \
+					 DMA_STATUS_NIS_RX_LOONGSON | \
+					 DMA_STATUS_AIS_TX_LOONGSON | \
+					 DMA_STATUS_AIS_RX_LOONGSON | \
+					 DMA_STATUS_FBI_TX_LOONGSON | \
+					 DMA_STATUS_FBI_RX_LOONGSON)
+
+#define DMA_STATUS_MSK_RX_LOONGSON	(DMA_STATUS_ERI | DMA_STATUS_RWT | \
+					 DMA_STATUS_RPS | DMA_STATUS_RU  | \
+					 DMA_STATUS_RI  | DMA_STATUS_OVF | \
+					 DMA_STATUS_MSK_COMMON_LOONGSON)
+
+#define DMA_STATUS_MSK_TX_LOONGSON	(DMA_STATUS_ETI | DMA_STATUS_UNF | \
+					 DMA_STATUS_TJT | DMA_STATUS_TU  | \
+					 DMA_STATUS_TPS | DMA_STATUS_TI  | \
+					 DMA_STATUS_MSK_COMMON_LOONGSON)
 
 #define PCI_DEVICE_ID_LOONGSON_GMAC	0x7a03
+#define PCI_DEVICE_ID_LOONGSON_GNET	0x7a13
+#define LOONGSON_DWMAC_CORE_1_00	0x10	/* Loongson custom IP */
+#define CHANNEL_NUM	                8
+
+struct loongson_data {
+	struct device *dev;
+};
 
 struct stmmac_pci_info {
 	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
@@ -69,13 +130,379 @@ static struct stmmac_pci_info loongson_gmac_pci_info = {
 	.setup = loongson_gmac_data,
 };
 
-static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static void loongson_gnet_dma_init_channel(struct stmmac_priv *priv,
+					   void __iomem *ioaddr,
+					   struct stmmac_dma_cfg *dma_cfg,
+					   u32 chan)
+{
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
+	u32 value;
+
+	/* common channel control register config */
+	value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+	/* Set the DMA PBL (Programmable Burst Length) mode.
+	 *
+	 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
+	 * post 3.5 mode bit acts as 8*PBL.
+	 */
+	if (dma_cfg->pblx8)
+		value |= DMA_BUS_MODE_MAXPBL;
+	value |= DMA_BUS_MODE_USP;
+	value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+	value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
+
+	/* Set the Fixed burst mode */
+	if (dma_cfg->fixed_burst)
+		value |= DMA_BUS_MODE_FB;
+
+	/* Mixed Burst has no effect when fb is set */
+	if (dma_cfg->mixed_burst)
+		value |= DMA_BUS_MODE_MB;
+
+	if (dma_cfg->atds)
+		value |= DMA_BUS_MODE_ATDS;
+
+	if (dma_cfg->aal)
+		value |= DMA_BUS_MODE_AAL;
+
+	writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK_LOONGSON, ioaddr +
+	       DMA_CHAN_INTR_ENA(chan));
+}
+
+static int loongson_gnet_dma_interrupt(struct stmmac_priv *priv,
+				       void __iomem *ioaddr,
+				       struct stmmac_extra_stats *x,
+				       u32 chan, u32 dir)
+{
+	struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats);
+	u32 abnor_intr_status;
+	u32 nor_intr_status;
+	u32 fb_intr_status;
+	u32 intr_status;
+	int ret = 0;
+
+	/* read the status register (CSR5) */
+	intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
+
+	if (dir == DMA_DIR_RX)
+		intr_status &= DMA_STATUS_MSK_RX_LOONGSON;
+	else if (dir == DMA_DIR_TX)
+		intr_status &= DMA_STATUS_MSK_TX_LOONGSON;
+
+	nor_intr_status = intr_status & (DMA_STATUS_NIS_TX_LOONGSON |
+		DMA_STATUS_NIS_RX_LOONGSON);
+	abnor_intr_status = intr_status & (DMA_STATUS_AIS_TX_LOONGSON |
+		DMA_STATUS_AIS_RX_LOONGSON);
+	fb_intr_status = intr_status & (DMA_STATUS_FBI_TX_LOONGSON |
+		DMA_STATUS_FBI_RX_LOONGSON);
+
+	/* ABNORMAL interrupts */
+	if (unlikely(abnor_intr_status)) {
+		if (unlikely(intr_status & DMA_STATUS_UNF)) {
+			ret = tx_hard_error_bump_tc;
+			x->tx_undeflow_irq++;
+		}
+		if (unlikely(intr_status & DMA_STATUS_TJT))
+			x->tx_jabber_irq++;
+
+		if (unlikely(intr_status & DMA_STATUS_OVF))
+			x->rx_overflow_irq++;
+
+		if (unlikely(intr_status & DMA_STATUS_RU))
+			x->rx_buf_unav_irq++;
+		if (unlikely(intr_status & DMA_STATUS_RPS))
+			x->rx_process_stopped_irq++;
+		if (unlikely(intr_status & DMA_STATUS_RWT))
+			x->rx_watchdog_irq++;
+		if (unlikely(intr_status & DMA_STATUS_ETI))
+			x->tx_early_irq++;
+		if (unlikely(intr_status & DMA_STATUS_TPS)) {
+			x->tx_process_stopped_irq++;
+			ret = tx_hard_error;
+		}
+		if (unlikely(intr_status & fb_intr_status)) {
+			x->fatal_bus_error_irq++;
+			ret = tx_hard_error;
+		}
+	}
+	/* TX/RX NORMAL interrupts */
+	if (likely(nor_intr_status)) {
+		if (likely(intr_status & DMA_STATUS_RI)) {
+			u32 value = readl(ioaddr + DMA_INTR_ENA);
+			/* to schedule NAPI on real RIE event. */
+			if (likely(value & DMA_INTR_ENA_RIE)) {
+				u64_stats_update_begin(&stats->syncp);
+				u64_stats_inc(&stats->rx_normal_irq_n[chan]);
+				u64_stats_update_end(&stats->syncp);
+				ret |= handle_rx;
+			}
+		}
+		if (likely(intr_status & DMA_STATUS_TI)) {
+			u64_stats_update_begin(&stats->syncp);
+			u64_stats_inc(&stats->tx_normal_irq_n[chan]);
+			u64_stats_update_end(&stats->syncp);
+			ret |= handle_tx;
+		}
+		if (unlikely(intr_status & DMA_STATUS_ERI))
+			x->rx_early_irq++;
+	}
+	/* Optional hardware blocks, interrupts should be disabled */
+	if (unlikely(intr_status &
+		     (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+		pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
+
+	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+	writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan));
+
+	return ret;
+}
+
+static void loongson_phylink_get_caps(struct stmmac_priv *priv)
+{
+	struct pci_dev *pdev = to_pci_dev(priv->device);
+	struct stmmac_resources res;
+	u32 loongson_gmac;
+
+	memset(&res, 0, sizeof(res));
+	res.addr = pcim_iomap_table(pdev)[0];
+	loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;
+
+	/* The GMAC device with PCI ID 7a03 does not support any pause mode.
+	 * The GNET device (only LS7A2000) does not support half-duplex.
+	 */
+	if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) {
+		priv->hw->link.caps = MAC_10FD | MAC_100FD |
+			MAC_1000FD;
+	} else {
+		priv->hw->link.caps = (MAC_ASYM_PAUSE |
+			MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD);
+
+		if (loongson_gmac == DWMAC_CORE_3_70) {
+			priv->hw->link.caps &= ~(MAC_10HD |
+				MAC_100HD | MAC_1000HD);
+		}
+	}
+}
+
+static void loongson_gnet_fix_speed(void *priv, unsigned int speed,
+				    unsigned int mode)
+{
+	struct loongson_data *ld = (struct loongson_data *)priv;
+	struct net_device *ndev = dev_get_drvdata(ld->dev);
+	struct stmmac_priv *ptr = netdev_priv(ndev);
+
+	/* The controller and PHY don't work well together.
+	 * We need to use the PS bit to check if the controller's status
+	 * is correct and reset PHY if necessary.
+	 * MAC_CTRL_REG.15 is defined by the GMAC_CONTROL_PS macro.
+	 */
+	if (speed == SPEED_1000) {
+		if (readl(ptr->ioaddr + MAC_CTRL_REG) &
+		    MAC_CTRL_PORT_SELECT_10_100)
+			/* Word around hardware bug, restart autoneg */
+			phy_restart_aneg(ndev->phydev);
+	}
+}
+
+static struct mac_device_info *loongson_gnet_setup(void *apriv)
+{
+	struct stmmac_ops *loongson_dwmac_ops;
+	struct stmmac_priv *priv = apriv;
+	struct mac_device_info *mac;
+	struct stmmac_dma_ops *dma;
+
+	mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL);
+	if (!mac)
+		return NULL;
+
+	dma = devm_kzalloc(priv->device, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return NULL;
+
+	loongson_dwmac_ops = devm_kzalloc(priv->device,
+					  sizeof(*loongson_dwmac_ops),
+					  GFP_KERNEL);
+	if (!loongson_dwmac_ops)
+		return NULL;
+
+	/* The original IP-core version is 0x37 in all Loongson GNET
+	 * (ls2k2000 and ls7a2000), but the GNET HW designers have changed the
+	 * GMAC_VERSION.SNPSVER field to the custom 0x10 value on the Loongson
+	 * ls2k2000 MAC to emphasize the differences: multiple DMA-channels,
+	 * AV feature and GMAC_INT_STATUS CSR flags layout. Get back the
+	 * original value so the correct HW-interface would be selected.
+	 */
+	priv->synopsys_id = DWMAC_CORE_3_70;
+	priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
+	*dma = dwmac1000_dma_ops;
+	dma->init_chan = loongson_gnet_dma_init_channel;
+	dma->dma_interrupt = loongson_gnet_dma_interrupt;
+	mac->dma = dma;
+
+	*loongson_dwmac_ops = dwmac1000_ops;
+	loongson_dwmac_ops->phylink_get_caps = loongson_phylink_get_caps;
+	mac->mac = loongson_dwmac_ops;
+
+	/* Pre-initialize the respective "mac" fields as it's done in
+	 * dwmac1000_setup()
+	 */
+	mac->pcsr = priv->ioaddr;
+	mac->multicast_filter_bins = priv->plat->multicast_filter_bins;
+	mac->unicast_filter_entries = priv->plat->unicast_filter_entries;
+	mac->mcast_bits_log2 = 0;
+
+	if (mac->multicast_filter_bins)
+		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+
+	mac->link.duplex = GMAC_CONTROL_DM;
+	mac->link.speed10 = GMAC_CONTROL_PS;
+	mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+	mac->link.speed1000 = 0;
+	mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+	mac->mii.addr = GMAC_MII_ADDR;
+	mac->mii.data = GMAC_MII_DATA;
+	mac->mii.addr_shift = 11;
+	mac->mii.addr_mask = 0x0000F800;
+	mac->mii.reg_shift = 6;
+	mac->mii.reg_mask = 0x000007C0;
+	mac->mii.clk_csr_shift = 2;
+	mac->mii.clk_csr_mask = GENMASK(5, 2);
+
+	return mac;
+}
+
+static int loongson_gnet_data(struct pci_dev *pdev,
+			      struct plat_stmmacenet_data *plat)
+{
+	struct stmmac_resources res;
+	u32 loongson_gmac;
+
+	loongson_default_data(pdev, plat);
+
+	plat->multicast_filter_bins = 256;
+
+	plat->mdio_bus_data->phy_mask =  ~(u32)BIT(2);
+
+	plat->phy_addr = -1;
+	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
+
+	plat->fix_mac_speed = loongson_gnet_fix_speed;
+
+	plat->dma_cfg->pbl = 32;
+	plat->dma_cfg->pblx8 = true;
+
+	plat->clk_ref_rate = 125000000;
+	plat->clk_ptp_rate = 125000000;
+
+	memset(&res, 0, sizeof(res));
+	res.addr = pcim_iomap_table(pdev)[0];
+
+	loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;
+
+	if (loongson_gmac == LOONGSON_DWMAC_CORE_1_00) {
+		plat->rx_queues_to_use = CHANNEL_NUM;
+		plat->tx_queues_to_use = CHANNEL_NUM;
+	} else {
+		plat->tx_queues_to_use = 1;
+		plat->rx_queues_to_use = 1;
+	}
+
+	/* GNET devices with dev revision 0x00 do not support manually
+	 * setting the speed to 1000.
+	 */
+	if (pdev->revision == 0x00)
+		plat->flags |= STMMAC_FLAG_DISABLE_FORCE_1000;
+
+	return 0;
+}
+
+static struct stmmac_pci_info loongson_gnet_pci_info = {
+	.setup = loongson_gnet_data,
+};
+
+static int loongson_dwmac_config_legacy(struct pci_dev *pdev,
+					struct plat_stmmacenet_data *plat,
+					struct stmmac_resources *res,
+					struct device_node *np)
+{
+	if (np) {
+		res->irq = of_irq_get_byname(np, "macirq");
+		if (res->irq < 0) {
+			dev_err(&pdev->dev, "IRQ macirq not found\n");
+			return -ENODEV;
+		}
+
+		res->wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+		if (res->wol_irq < 0) {
+			dev_info(&pdev->dev,
+				 "IRQ eth_wake_irq not found, using macirq\n");
+			res->wol_irq = res->irq;
+		}
+
+		res->lpi_irq = of_irq_get_byname(np, "eth_lpi");
+		if (res->lpi_irq < 0) {
+			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+			return -ENODEV;
+		}
+	} else {
+		res->irq = pdev->irq;
+		res->wol_irq = res->irq;
+	}
+
+	return 0;
+}
+
+static int loongson_dwmac_config_msi(struct pci_dev *pdev,
+				     struct plat_stmmacenet_data *plat,
+				     struct stmmac_resources *res,
+				     struct device_node *np)
+{
+	int i, ret, vecs;
+
+	vecs = roundup_pow_of_two(CHANNEL_NUM * 2 + 1);
+	ret = pci_alloc_irq_vectors(pdev, vecs, vecs, PCI_IRQ_MSI);
+	if (ret < 0) {
+		dev_info(&pdev->dev,
+			 "MSI enable failed, Fallback to legacy interrupt\n");
+		return loongson_dwmac_config_legacy(pdev, plat, res, np);
+	}
+
+	res->irq = pci_irq_vector(pdev, 0);
+	res->wol_irq = 0;
+
+	/* INT NAME | MAC | CH7 rx | CH7 tx | ... | CH0 rx | CH0 tx |
+	 * --------- ----- -------- --------  ...  -------- --------
+	 * IRQ NUM  |  0  |   1    |   2    | ... |   15   |   16   |
+	 */
+	for (i = 0; i < CHANNEL_NUM; i++) {
+		res->rx_irq[CHANNEL_NUM - 1 - i] =
+			pci_irq_vector(pdev, 1 + i * 2);
+		res->tx_irq[CHANNEL_NUM - 1 - i] =
+			pci_irq_vector(pdev, 2 + i * 2);
+	}
+
+	plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
+
+	return 0;
+}
+
+static int loongson_dwmac_probe(struct pci_dev *pdev,
+				const struct pci_device_id *id)
 {
 	struct plat_stmmacenet_data *plat;
 	int ret, i, bus_id, phy_mode;
 	struct stmmac_pci_info *info;
 	struct stmmac_resources res;
+	struct loongson_data *ld;
 	struct device_node *np;
+	u32 loongson_gmac;
 
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
@@ -87,11 +514,16 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 	if (!plat->mdio_bus_data)
 		return -ENOMEM;
 
-	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
-	if (!plat->dma_cfg) {
-		ret = -ENOMEM;
-		goto err_put_node;
-	}
+	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
+				     GFP_KERNEL);
+	if (!plat->dma_cfg)
+		return -ENOMEM;
+
+	ld = devm_kzalloc(&pdev->dev, sizeof(*ld), GFP_KERNEL);
+	if (!ld)
+		return -ENOMEM;
+
+	np = dev_of_node(&pdev->dev);
 
 	/* Enable pci device */
 	ret = pci_enable_device(pdev);
@@ -110,14 +542,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 		break;
 	}
 
-	phy_mode = device_get_phy_mode(&pdev->dev);
-	if (phy_mode < 0) {
-		dev_err(&pdev->dev, "phy_mode not found\n");
-		ret = phy_mode;
-		goto err_disable_device;
-	}
-
-	plat->phy_interface = phy_mode;
 	plat->mac_interface = PHY_INTERFACE_MODE_GMII;
 
 	pci_set_master(pdev);
@@ -133,7 +557,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 			dev_info(&pdev->dev, "Found MDIO subnode\n");
 			plat->mdio_bus_data->needs_reset = true;
 		}
-
 		bus_id = of_alias_get_id(np, "ethernet");
 		if (bus_id >= 0)
 			plat->bus_id = bus_id;
@@ -145,42 +568,37 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 			goto err_disable_device;
 		}
 		plat->phy_interface = phy_mode;
-
-		res.irq = of_irq_get_byname(np, "macirq");
-		if (res.irq < 0) {
-			dev_err(&pdev->dev, "IRQ macirq not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
-
-		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-		if (res.wol_irq < 0) {
-			dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-			res.wol_irq = res.irq;
-		}
-
-		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-		if (res.lpi_irq < 0) {
-			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
-	} else {
-		res.irq = pdev->irq;
 	}
 
-	pci_enable_msi(pdev);
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
 
+	ld->dev = &pdev->dev;
+	plat->bsp_priv = ld;
+	loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;
+
+	switch (loongson_gmac) {
+	case LOONGSON_DWMAC_CORE_1_00:
+		plat->setup = loongson_gnet_setup;
+		/* Only channel 0 of the 0x10 device supports checksum,
+		 * so turn off checksum to enable multiple channels.
+		 */
+		for (i = 1; i < CHANNEL_NUM; i++) {
+			plat->tx_queues_cfg[i].coe_unsupported = 1;
+		};
+		ret = loongson_dwmac_config_msi(pdev, plat, &res, np);
+		break;
+	default:	/* 0x35 device and 0x37 device. */
+		ret = loongson_dwmac_config_legacy(pdev, plat, &res, np);
+		break;
+	}
+
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
 	if (ret)
-		goto err_disable_msi;
+		goto err_disable_device;
 
 	return ret;
 
-err_disable_msi:
-	pci_disable_msi(pdev);
 err_disable_device:
 	pci_disable_device(pdev);
 err_put_node:
@@ -248,6 +666,7 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
 
 static const struct pci_device_id loongson_dwmac_id_table[] = {
 	{ PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
+	{ PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
@@ -266,4 +685,5 @@ module_pci_driver(loongson_dwmac_driver);
 
 MODULE_DESCRIPTION("Loongson DWMAC PCI driver");
 MODULE_AUTHOR("Qing Zhang <zhangqing@...ngson.cn>");
+MODULE_AUTHOR("Yanteng Si <siyanteng@...ngson.cn>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index f161ec9ac490..66c0c22908b1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -296,3 +296,4 @@ const struct stmmac_dma_ops dwmac1000_dma_ops = {
 	.get_hw_feature = dwmac1000_get_hw_feature,
 	.rx_watchdog = dwmac1000_rx_watchdog,
 };
+EXPORT_SYMBOL_GPL(dwmac1000_dma_ops);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 1b54b84a6785..c5d3d0ddb6f8 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -223,6 +223,7 @@ struct dwmac4_addrs {
 #define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI		BIT(10)
 #define STMMAC_FLAG_EN_TX_LPI_CLOCKGATING	BIT(11)
 #define STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY	BIT(12)
+#define STMMAC_FLAG_DISABLE_FORCE_1000		BIT(13)
 
 struct plat_stmmacenet_data {
 	int bus_id;
-- 
2.31.4

Powered by blists - more mailing lists