| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240410124628.171783-16-brgl@bgdev.pl>
Date: Wed, 10 Apr 2024 14:46:27 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Marcel Holtmann <marcel@...tmann.org>,
Luiz Augusto von Dentz <luiz.dentz@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kalle Valo <kvalo@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Bartosz Golaszewski <brgl@...ev.pl>,
Saravana Kannan <saravanak@...gle.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Arnd Bergmann <arnd@...db.de>,
Neil Armstrong <neil.armstrong@...aro.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Alex Elder <elder@...aro.org>,
Srini Kandagatla <srinivas.kandagatla@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Abel Vesa <abel.vesa@...aro.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Lukas Wunner <lukas@...ner.de>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Amit Pundir <amit.pundir@...aro.org>,
Xilin Wu <wuxilin123@...il.com>
Cc: linux-bluetooth@...r.kernel.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-wireless@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-pci@...r.kernel.org,
linux-pm@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH v7 15/16] Bluetooth: qca: use the power sequencer for QCA6390
From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Use the pwrseq subsystem's consumer API to run the power-up sequence for
the Bluetooth module of the QCA6390 package.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
---
drivers/bluetooth/hci_qca.c | 74 +++++++++++++++++++++++++++++--------
1 file changed, 59 insertions(+), 15 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 8a60ad7acd70..d31dcea650c1 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -29,6 +29,7 @@
#include <linux/of.h>
#include <linux/acpi.h>
#include <linux/platform_device.h>
+#include <linux/pwrseq/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/serdev.h>
#include <linux/mutex.h>
@@ -215,6 +216,7 @@ struct qca_power {
struct regulator_bulk_data *vreg_bulk;
int num_vregs;
bool vregs_on;
+ struct pwrseq_desc *pwrseq;
};
struct qca_serdev {
@@ -1682,6 +1684,27 @@ static bool qca_wakeup(struct hci_dev *hdev)
return wakeup;
}
+static int qca_port_reopen(struct hci_uart *hu)
+{
+ int ret;
+
+ /* Now the device is in ready state to communicate with host.
+ * To sync host with device we need to reopen port.
+ * Without this, we will have RTS and CTS synchronization
+ * issues.
+ */
+ serdev_device_close(hu->serdev);
+ ret = serdev_device_open(hu->serdev);
+ if (ret) {
+ bt_dev_err(hu->hdev, "failed to open port");
+ return ret;
+ }
+
+ hci_uart_set_flow_control(hu, false);
+
+ return 0;
+}
+
static int qca_regulator_init(struct hci_uart *hu)
{
enum qca_btsoc_type soc_type = qca_soc_type(hu);
@@ -1750,21 +1773,7 @@ static int qca_regulator_init(struct hci_uart *hu)
break;
}
- /* Now the device is in ready state to communicate with host.
- * To sync host with device we need to reopen port.
- * Without this, we will have RTS and CTS synchronization
- * issues.
- */
- serdev_device_close(hu->serdev);
- ret = serdev_device_open(hu->serdev);
- if (ret) {
- bt_dev_err(hu->hdev, "failed to open port");
- return ret;
- }
-
- hci_uart_set_flow_control(hu, false);
-
- return 0;
+ return qca_port_reopen(hu);
}
static int qca_power_on(struct hci_dev *hdev)
@@ -1792,6 +1801,17 @@ static int qca_power_on(struct hci_dev *hdev)
ret = qca_regulator_init(hu);
break;
+ case QCA_QCA6390:
+ qcadev = serdev_device_get_drvdata(hu->serdev);
+ ret = pwrseq_power_on(qcadev->bt_power->pwrseq);
+ if (ret)
+ return ret;
+
+ ret = qca_port_reopen(hu);
+ if (ret)
+ return ret;
+ break;
+
default:
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->bt_en) {
@@ -2170,6 +2190,10 @@ static void qca_power_shutdown(struct hci_uart *hu)
}
break;
+ case QCA_QCA6390:
+ pwrseq_power_off(qcadev->bt_power->pwrseq);
+ break;
+
default:
gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
@@ -2308,12 +2332,25 @@ static int qca_serdev_probe(struct serdev_device *serdev)
case QCA_WCN6750:
case QCA_WCN6855:
case QCA_WCN7850:
+ case QCA_QCA6390:
qcadev->bt_power = devm_kzalloc(&serdev->dev,
sizeof(struct qca_power),
GFP_KERNEL);
if (!qcadev->bt_power)
return -ENOMEM;
+ break;
+ default:
+ break;
+ }
+ switch (qcadev->btsoc_type) {
+ case QCA_WCN3988:
+ case QCA_WCN3990:
+ case QCA_WCN3991:
+ case QCA_WCN3998:
+ case QCA_WCN6750:
+ case QCA_WCN6855:
+ case QCA_WCN7850:
qcadev->bt_power->dev = &serdev->dev;
err = qca_init_regulators(qcadev->bt_power, data->vregs,
data->num_vregs);
@@ -2354,6 +2391,13 @@ static int qca_serdev_probe(struct serdev_device *serdev)
}
break;
+ case QCA_QCA6390:
+ qcadev->bt_power->pwrseq = devm_pwrseq_get(&serdev->dev,
+ "bluetooth");
+ if (IS_ERR(qcadev->bt_power->pwrseq))
+ return PTR_ERR(qcadev->bt_power->pwrseq);
+ fallthrough;
+
default:
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
--
2.40.1
Powered by blists - more mailing lists