lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID:
 <LV3P220MB12026EB15790ABE932799E53A0062@LV3P220MB1202.NAMP220.PROD.OUTLOOK.COM>
Date: Wed, 10 Apr 2024 12:23:42 -0400
From: Min Li <lnimi@...mail.com>
To: richardcochran@...il.com,
	lee@...nel.org
Cc: linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org,
	Min Li <min.li.xe@...esas.com>
Subject: [PATCH net-next v2 1/1] ptp: 82p33: move register definitions out of ptp folder

From: Min Li <min.li.xe@...esas.com>

Relocate idt82p33 register definitions so that other multi-functional
devices can access those definitions.

Signed-off-by: Min Li <min.li.xe@...esas.com>
---
Submit to net-next and add driver name suggested by Jakub

 drivers/ptp/ptp_idt82p33.h       | 27 -----------------------
 include/linux/mfd/idt82p33_reg.h | 38 +++++++++++++++++++++++++++++---
 2 files changed, 35 insertions(+), 30 deletions(-)

diff --git a/drivers/ptp/ptp_idt82p33.h b/drivers/ptp/ptp_idt82p33.h
index 6a63c14b6966..b4f3ee40389f 100644
--- a/drivers/ptp/ptp_idt82p33.h
+++ b/drivers/ptp/ptp_idt82p33.h
@@ -23,25 +23,6 @@
 #define DDCO_THRESHOLD_NS	(5)
 #define IDT82P33_MAX_WRITE_COUNT	(512)
 
-#define PLLMASK_ADDR_HI	0xFF
-#define PLLMASK_ADDR_LO	0xA5
-
-#define PLL0_OUTMASK_ADDR_HI	0xFF
-#define PLL0_OUTMASK_ADDR_LO	0xB0
-
-#define PLL1_OUTMASK_ADDR_HI	0xFF
-#define PLL1_OUTMASK_ADDR_LO	0xB2
-
-#define PLL2_OUTMASK_ADDR_HI	0xFF
-#define PLL2_OUTMASK_ADDR_LO	0xB4
-
-#define PLL3_OUTMASK_ADDR_HI	0xFF
-#define PLL3_OUTMASK_ADDR_LO	0xB6
-
-#define DEFAULT_PLL_MASK	(0x01)
-#define DEFAULT_OUTPUT_MASK_PLL0	(0xc0)
-#define DEFAULT_OUTPUT_MASK_PLL1	DEFAULT_OUTPUT_MASK_PLL0
-
 /**
  * @brief Maximum absolute value for write phase offset in nanoseconds
  */
@@ -103,12 +84,4 @@ struct idt82p33 {
 	s64			tod_write_overhead_ns;
 };
 
-/* firmware interface */
-struct idt82p33_fwrc {
-	u8 hiaddr;
-	u8 loaddr;
-	u8 value;
-	u8 reserved;
-} __packed;
-
 #endif /* PTP_IDT82P33_H */
diff --git a/include/linux/mfd/idt82p33_reg.h b/include/linux/mfd/idt82p33_reg.h
index 1db532feeb91..15828e205fa8 100644
--- a/include/linux/mfd/idt82p33_reg.h
+++ b/include/linux/mfd/idt82p33_reg.h
@@ -22,6 +22,12 @@
 #define DPLL1_OPERATING_MODE_CNFG 0x120
 #define DPLL2_OPERATING_MODE_CNFG 0x1A0
 
+#define DPLL1_HOLDOVER_MODE_CNFG_LSB 0x12A
+#define DPLL1_HOLDOVER_MODE_CNFG_MSB 0x12B
+
+#define DPLL2_HOLDOVER_MODE_CNFG_LSB 0x1A9
+#define DPLL2_HOLDOVER_MODE_CNFG_MSB 0x1AA
+
 #define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
 #define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
 
@@ -43,7 +49,6 @@
 #define REG_SOFT_RESET 0X381
 
 #define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
-#define TOD_TRIGGER(wr_trig, rd_trig) ((wr_trig & 0xf) << 4 | (rd_trig & 0xf))
 
 /* Register bit definitions */
 #define SYNC_TOD BIT(1)
@@ -101,7 +106,7 @@ enum hw_tod_trig_sel {
 	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
 };
 
-/** @brief Enumerated type listing DPLL operational modes */
+/* Enumerated type listing DPLL operational modes */
 enum dpll_state {
 	DPLL_STATE_FREERUN = 1,
 	DPLL_STATE_HOLDOVER = 2,
@@ -109,7 +114,34 @@ enum dpll_state {
 	DPLL_STATE_PRELOCKED2 = 5,
 	DPLL_STATE_PRELOCKED = 6,
 	DPLL_STATE_LOSTPHASE = 7,
-	DPLL_STATE_MAX
+	DPLL_STATE_MAX = DPLL_STATE_LOSTPHASE,
 };
 
+/* firmware interface */
+struct idt82p33_fwrc {
+	u8 hiaddr;
+	u8 loaddr;
+	u8 value;
+	u8 reserved;
+} __packed;
+
+#define PLLMASK_ADDR_HI	0xFF
+#define PLLMASK_ADDR_LO	0xA5
+
+#define PLL0_OUTMASK_ADDR_HI	0xFF
+#define PLL0_OUTMASK_ADDR_LO	0xB0
+
+#define PLL1_OUTMASK_ADDR_HI	0xFF
+#define PLL1_OUTMASK_ADDR_LO	0xB2
+
+#define PLL2_OUTMASK_ADDR_HI	0xFF
+#define PLL2_OUTMASK_ADDR_LO	0xB4
+
+#define PLL3_OUTMASK_ADDR_HI	0xFF
+#define PLL3_OUTMASK_ADDR_LO	0xB6
+
+#define DEFAULT_PLL_MASK	(0x01)
+#define DEFAULT_OUTPUT_MASK_PLL0	(0xc0)
+#define DEFAULT_OUTPUT_MASK_PLL1	DEFAULT_OUTPUT_MASK_PLL0
+
 #endif
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ