| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240411143658.1049706-4-christophe.roullier@foss.st.com>
Date: Thu, 11 Apr 2024 16:36:50 +0200
From: Christophe Roullier <christophe.roullier@...s.st.com>
To: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni
<pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue
<alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>,
Jose Abreu <joabreu@...opsys.com>, Liam Girdwood <lgirdwood@...il.com>,
Mark
Brown <broonie@...nel.org>,
Christophe Roullier
<christophe.roullier@...s.st.com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 03/11] net: ethernet: stmmac: rework glue to simplify management for next stm32
Change glue to be more generic and manage easily next stm32 products.
The goal of this commit is to have one stm32mp1_set_mode function which
can manage different STM32 SOC. SOC can have different SYSCFG register
bitfields. so in pmcsetr we defined the bitfields corresponding to the SOC.
Signed-off-by: Christophe Roullier <christophe.roullier@...s.st.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 76 +++++++++++++------
1 file changed, 51 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index c92dfc4ecf570..68a02de25ac76 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -23,10 +23,6 @@
#define SYSCFG_MCU_ETH_MASK BIT(23)
#define SYSCFG_MP1_ETH_MASK GENMASK(23, 16)
-#define SYSCFG_PMCCLRR_OFFSET 0x40
-
-#define SYSCFG_PMCR_ETH_CLK_SEL BIT(16)
-#define SYSCFG_PMCR_ETH_REF_CLK_SEL BIT(17)
/* CLOCK feed to PHY*/
#define ETH_CK_F_25M 25000000
@@ -46,9 +42,6 @@
* RMII | 1 | 0 | 0 | n/a |
*------------------------------------------
*/
-#define SYSCFG_PMCR_ETH_SEL_MII BIT(20)
-#define SYSCFG_PMCR_ETH_SEL_RGMII BIT(21)
-#define SYSCFG_PMCR_ETH_SEL_RMII BIT(23)
#define SYSCFG_PMCR_ETH_SEL_GMII 0
#define SYSCFG_MCU_ETH_SEL_MII 0
#define SYSCFG_MCU_ETH_SEL_RMII 1
@@ -90,19 +83,33 @@ struct stm32_dwmac {
int eth_ref_clk_sel_reg;
int irq_pwr_wakeup;
u32 mode_reg; /* MAC glue-logic mode register */
+ u32 mode_mask;
struct regmap *regmap;
u32 speed;
const struct stm32_ops *ops;
struct device *dev;
};
+struct stm32_syscfg_pmcsetr {
+ u32 eth1_clk_sel;
+ u32 eth1_ref_clk_sel;
+ u32 eth1_selmii;
+ u32 eth1_sel_rgmii;
+ u32 eth1_sel_rmii;
+ u32 eth2_clk_sel;
+ u32 eth2_ref_clk_sel;
+ u32 eth2_sel_rgmii;
+ u32 eth2_sel_rmii;
+};
+
struct stm32_ops {
int (*set_mode)(struct plat_stmmacenet_data *plat_dat);
int (*suspend)(struct stm32_dwmac *dwmac);
void (*resume)(struct stm32_dwmac *dwmac);
int (*parse_data)(struct stm32_dwmac *dwmac,
struct device *dev);
- u32 syscfg_eth_mask;
+ u32 syscfg_clr_off;
+ struct stm32_syscfg_pmcsetr pmcsetr;
bool clk_rx_enable_in_suspend;
};
@@ -161,7 +168,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
{
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
u32 reg = dwmac->mode_reg, clk_rate;
- int val;
+ int val = 0;
clk_rate = clk_get_rate(dwmac->clk_eth_ck);
dwmac->enable_eth_ck = false;
@@ -169,7 +176,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
case PHY_INTERFACE_MODE_MII:
if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
dwmac->enable_eth_ck = true;
- val = SYSCFG_PMCR_ETH_SEL_MII;
+ val = dwmac->ops->pmcsetr.eth1_selmii;
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
break;
case PHY_INTERFACE_MODE_GMII:
@@ -177,16 +184,17 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
if (clk_rate == ETH_CK_F_25M &&
(dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
dwmac->enable_eth_ck = true;
- val |= SYSCFG_PMCR_ETH_CLK_SEL;
+ val |= dwmac->ops->pmcsetr.eth1_clk_sel;
}
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
break;
case PHY_INTERFACE_MODE_RMII:
- val = SYSCFG_PMCR_ETH_SEL_RMII;
+ val = dwmac->ops->pmcsetr.eth1_sel_rmii | dwmac->ops->pmcsetr.eth2_sel_rmii;
if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) &&
(dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) {
dwmac->enable_eth_ck = true;
- val |= SYSCFG_PMCR_ETH_REF_CLK_SEL;
+ val |= dwmac->ops->pmcsetr.eth1_ref_clk_sel;
+ val |= dwmac->ops->pmcsetr.eth2_ref_clk_sel;
}
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
break;
@@ -194,11 +202,12 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
- val = SYSCFG_PMCR_ETH_SEL_RGMII;
+ val = dwmac->ops->pmcsetr.eth1_sel_rgmii | dwmac->ops->pmcsetr.eth2_sel_rgmii;
if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) &&
(dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
dwmac->enable_eth_ck = true;
- val |= SYSCFG_PMCR_ETH_CLK_SEL;
+ val |= dwmac->ops->pmcsetr.eth1_clk_sel;
+ val |= dwmac->ops->pmcsetr.eth2_clk_sel;
}
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RGMII\n");
break;
@@ -210,12 +219,12 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
}
/* Need to update PMCCLRR (clear register) */
- regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
- dwmac->ops->syscfg_eth_mask);
+ regmap_write(dwmac->regmap, reg + dwmac->ops->syscfg_clr_off,
+ dwmac->mode_mask);
/* Update PMCSETR (set register) */
return regmap_update_bits(dwmac->regmap, reg,
- dwmac->ops->syscfg_eth_mask, val);
+ dwmac->mode_mask, val);
}
static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
@@ -241,7 +250,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
}
return regmap_update_bits(dwmac->regmap, reg,
- dwmac->ops->syscfg_eth_mask, val << 23);
+ SYSCFG_MCU_ETH_MASK, val << 23);
}
static void stm32_dwmac_clk_disable(struct stm32_dwmac *dwmac, bool suspend)
@@ -286,10 +295,17 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
return PTR_ERR(dwmac->regmap);
err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->mode_reg);
+ if (err) {
+ dev_err(dev, "Can't get sysconfig register offset (%d)\n", err);
+ return err;
+ }
+
+ dwmac->mode_mask = SYSCFG_MP1_ETH_MASK;
+ err = of_property_read_u32_index(np, "st,syscon", 2, &dwmac->mode_mask);
if (err)
- dev_err(dev, "Can't get sysconfig mode offset (%d)\n", err);
+ pr_debug("Warning sysconfig register mask not set\n");
- return err;
+ return 0;
}
static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
@@ -478,8 +494,7 @@ static SIMPLE_DEV_PM_OPS(stm32_dwmac_pm_ops,
stm32_dwmac_suspend, stm32_dwmac_resume);
static struct stm32_ops stm32mcu_dwmac_data = {
- .set_mode = stm32mcu_set_mode,
- .syscfg_eth_mask = SYSCFG_MCU_ETH_MASK
+ .set_mode = stm32mcu_set_mode
};
static struct stm32_ops stm32mp1_dwmac_data = {
@@ -487,8 +502,19 @@ static struct stm32_ops stm32mp1_dwmac_data = {
.suspend = stm32mp1_suspend,
.resume = stm32mp1_resume,
.parse_data = stm32mp1_parse_data,
- .syscfg_eth_mask = SYSCFG_MP1_ETH_MASK,
- .clk_rx_enable_in_suspend = true
+ .clk_rx_enable_in_suspend = true,
+ .syscfg_clr_off = 0x44,
+ .pmcsetr = {
+ .eth1_clk_sel = BIT(16),
+ .eth1_ref_clk_sel = BIT(17),
+ .eth1_selmii = BIT(20),
+ .eth1_sel_rgmii = BIT(21),
+ .eth1_sel_rmii = BIT(23),
+ .eth2_clk_sel = 0,
+ .eth2_ref_clk_sel = 0,
+ .eth2_sel_rgmii = 0,
+ .eth2_sel_rmii = 0
+ }
};
static const struct of_device_id stm32_dwmac_match[] = {
--
2.25.1
Powered by blists - more mailing lists