netdev - Re: [PATCH net] bonding: 802.3ad: Avoid packet loss when switching aggregator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZhdOpk5lCQC0_Xq0@Laptop-X1>
Date: Thu, 11 Apr 2024 10:44:54 +0800
From: Hangbin Liu <liuhangbin@...il.com>
To: Thomas Bogendoerfer <tbogendoerfer@...e.de>
Cc: Jay Vosburgh <j.vosburgh@...il.com>,
	Andy Gospodarek <andy@...yhouse.net>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net] bonding: 802.3ad: Avoid packet loss when switching
 aggregator

On Thu, Apr 04, 2024 at 01:49:08PM +0200, Thomas Bogendoerfer wrote:
> If selection logic decides to switch to a new aggregator it disables
> all ports of the old aggregator, but doesn't enable ports on
> the new aggregator. These ports will eventually be enabled when
> the next LACPDU is received, which might take some time and without an
> active port transmitted frames are dropped. Avoid this by enabling
> already collected ports of the new aggregator immediately.
> 
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@...e.de>
> ---
>  drivers/net/bonding/bond_3ad.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
> index c6807e473ab7..529e2a7c51e2 100644
> --- a/drivers/net/bonding/bond_3ad.c
> +++ b/drivers/net/bonding/bond_3ad.c
> @@ -1876,6 +1876,13 @@ static void ad_agg_selection_logic(struct aggregator *agg,
>  				__disable_port(port);
>  			}
>  		}
> +
> +		/* enable ports on new active aggregator */
> +		for (port = best->lag_ports; port;
> +			port = port->next_port_in_aggregator) {
> +			__enable_port(port);
> +		}
> +
>  		/* Slave array needs update. */
>  		*update_slave_arr = true;
>  	}
> -- 
> 2.35.3
> 

Reviewed-by: Hangbin Liu <liuhangbin@...il.com>