| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <df31e8bcf74b3b4ddb7ddf5a1c371390f16a2ad5.1712917541.git.siyanteng@loongson.cn>
Date: Fri, 12 Apr 2024 19:28:06 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
fancer.lancer@...il.com
Cc: Jose.Abreu@...opsys.com,
chenhuacai@...nel.org,
linux@...linux.org.uk,
guyinggang@...ngson.cn,
netdev@...r.kernel.org,
chris.chenfeiyang@...il.com,
siyanteng01@...il.com,
Yanteng Si <siyanteng@...ngson.cn>
Subject: [PATCH net-next v11 1/6] net: stmmac: Move all PHYLINK MAC capabilities initializations to MAC-specific setup methods
From: Serge Semin <fancer.lancer@...il.com>
Seeing the Tx-queues-based constraint is DW QoS Eth-specific there is
such reason. It might be better to move the selective Half-duplex
mode disabling to the MAC-specific callback.
But there are a better option to implement the MAC capabilities
detection procedure. Let's see what MAC-capabilities can be currently
specified based on the DW MAC IP-core versions:
DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100
DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
but if the amount of the active Tx queues is > 1, then:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD
DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD |
MAC_10000FD | MAC_25000FD |
MAC_40000FD | MAC_50000FD |
MAC_100000FD
As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE. Seeing the flow-control is implemented
as a callback for each MAC IP-core (see dwmac100_flow_ctrl(),
dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(), etc) we can freely
move all the PHYLINK MAC capabilities initializations to the
MAC-specific setup methods.
After that the only IP-core which requires the capabilities update will
be DW QoS Eth. So the Tx-queue-based capabilities update can be moved
there and the rest of the xgmac_phylink_get_caps() callback can be
dropped.
We can go further. Instead of calling the
stmmac_set_half_duplex()/stmmac_set_mac_capabilties() methods on the
device init and queues reinit stages, we can move their bodies into
the phylink:mac_get_caps() callback.
Others see:
<https://lore.kernel.org/netdev/cover.1706601050.git.siyanteng@loong
son.cn/T/#m7d724d33faee34fed696e4458d9f6b09b0572e77>
Signed-off-by: Serge Semin <fancer.lancer@...il.com>
Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +
.../ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +
.../ethernet/stmicro/stmmac/dwmac100_core.c | 2 +
.../net/ethernet/stmicro/stmmac/dwmac4_core.c | 8 +++-
.../ethernet/stmicro/stmmac/dwxgmac2_core.c | 15 +++----
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 43 ++++++++-----------
7 files changed, 36 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index f55cf09f0783..9cd62b2110a1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -553,6 +553,7 @@ extern const struct stmmac_hwtimestamp stmmac_ptp;
extern const struct stmmac_mode_ops dwmac4_ring_mode_ops;
struct mac_link {
+ u32 caps;
u32 speed_mask;
u32 speed10;
u32 speed100;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index b21d99faa2d0..e1b761dcfa1d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1096,6 +1096,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
priv->dev->priv_flags |= IFF_UNICAST_FLT;
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
/* The loopback bit seems to be re-set when link change
* Simply mask it each time
* Speed 10/100/1000 are set in BIT(2)/BIT(3)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 3927609abc44..8555299443f4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -539,6 +539,8 @@ int dwmac1000_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000;
mac->link.duplex = GMAC_CONTROL_DM;
mac->link.speed10 = GMAC_CONTROL_PS;
mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index a6e8d7bd9588..7667d103cd0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -175,6 +175,8 @@ int dwmac100_setup(struct stmmac_priv *priv)
dev_info(priv->device, "\tDWMAC100\n");
mac->pcsr = priv->ioaddr;
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100;
mac->link.duplex = MAC_CONTROL_F;
mac->link.speed10 = 0;
mac->link.speed100 = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index cef25efbdff9..70a4ac16d3c8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -70,7 +70,11 @@ static void dwmac4_core_init(struct mac_device_info *hw,
static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
{
- priv->phylink_config.mac_capabilities |= MAC_2500FD;
+ /* Half-Duplex can only work with single tx queue */
+ if (priv->plat->tx_queues_to_use > 1)
+ priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD);
+ else
+ priv->hw->link.caps |= (MAC_10HD | MAC_100HD | MAC_1000HD);
}
static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
@@ -1378,6 +1382,8 @@ int dwmac4_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
mac->link.duplex = GMAC_CONFIG_DM;
mac->link.speed10 = GMAC_CONFIG_PS;
mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index e841e312077e..759b9b7a2f3f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -47,14 +47,6 @@ static void dwxgmac2_core_init(struct mac_device_info *hw,
writel(XGMAC_INT_DEFAULT_EN, ioaddr + XGMAC_INT_EN);
}
-static void xgmac_phylink_get_caps(struct stmmac_priv *priv)
-{
- priv->phylink_config.mac_capabilities |= MAC_2500FD | MAC_5000FD |
- MAC_10000FD | MAC_25000FD |
- MAC_40000FD | MAC_50000FD |
- MAC_100000FD;
-}
-
static void dwxgmac2_set_mac(void __iomem *ioaddr, bool enable)
{
u32 tx = readl(ioaddr + XGMAC_TX_CONFIG);
@@ -1540,7 +1532,6 @@ static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *
const struct stmmac_ops dwxgmac210_ops = {
.core_init = dwxgmac2_core_init,
- .phylink_get_caps = xgmac_phylink_get_caps,
.set_mac = dwxgmac2_set_mac,
.rx_ipc = dwxgmac2_rx_ipc,
.rx_queue_enable = dwxgmac2_rx_queue_enable,
@@ -1601,7 +1592,6 @@ static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
const struct stmmac_ops dwxlgmac2_ops = {
.core_init = dwxgmac2_core_init,
- .phylink_get_caps = xgmac_phylink_get_caps,
.set_mac = dwxgmac2_set_mac,
.rx_ipc = dwxgmac2_rx_ipc,
.rx_queue_enable = dwxlgmac2_rx_queue_enable,
@@ -1698,6 +1688,11 @@ int dwxlgmac2_setup(struct stmmac_priv *priv)
if (mac->multicast_filter_bins)
mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+ mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_1000FD | MAC_2500FD | MAC_5000FD |
+ MAC_10000FD | MAC_25000FD |
+ MAC_40000FD | MAC_50000FD |
+ MAC_100000FD;
mac->link.duplex = 0;
mac->link.speed1000 = XLGMAC_CONFIG_SS_1000;
mac->link.speed2500 = XLGMAC_CONFIG_SS_2500;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fe3498e86de9..af16efeedf4a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -936,6 +936,22 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
priv->pause, tx_cnt);
}
+static unsigned long stmmac_mac_get_caps(struct phylink_config *config,
+ phy_interface_t interface)
+{
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+ /* Get the MAC-specific capabilities */
+ stmmac_mac_phylink_get_caps(priv);
+
+ config->mac_capabilities = priv->hw->link.caps;
+
+ if (priv->plat->max_speed)
+ phylink_limit_mac_speed(config, priv->plat->max_speed);
+
+ return config->mac_capabilities;
+}
+
static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config,
phy_interface_t interface)
{
@@ -1102,6 +1118,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
}
static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
+ .mac_get_caps = stmmac_mac_get_caps,
.mac_select_pcs = stmmac_mac_select_pcs,
.mac_config = stmmac_mac_config,
.mac_link_down = stmmac_mac_link_down,
@@ -1195,24 +1212,12 @@ static int stmmac_init_phy(struct net_device *dev)
return ret;
}
-static void stmmac_set_half_duplex(struct stmmac_priv *priv)
-{
- /* Half-Duplex can only work with single tx queue */
- if (priv->plat->tx_queues_to_use > 1)
- priv->phylink_config.mac_capabilities &=
- ~(MAC_10HD | MAC_100HD | MAC_1000HD);
- else
- priv->phylink_config.mac_capabilities |=
- (MAC_10HD | MAC_100HD | MAC_1000HD);
-}
-
static int stmmac_phy_setup(struct stmmac_priv *priv)
{
struct stmmac_mdio_bus_data *mdio_bus_data;
int mode = priv->plat->phy_interface;
struct fwnode_handle *fwnode;
struct phylink *phylink;
- int max_speed;
priv->phylink_config.dev = &priv->dev->dev;
priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1236,19 +1241,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
xpcs_get_interfaces(priv->hw->xpcs,
priv->phylink_config.supported_interfaces);
- priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- MAC_10FD | MAC_100FD |
- MAC_1000FD;
-
- stmmac_set_half_duplex(priv);
-
- /* Get the MAC specific capabilities */
- stmmac_mac_phylink_get_caps(priv);
-
- max_speed = priv->plat->max_speed;
- if (max_speed)
- phylink_limit_mac_speed(&priv->phylink_config, max_speed);
-
fwnode = priv->plat->port_node;
if (!fwnode)
fwnode = dev_fwnode(priv->device);
@@ -7357,7 +7349,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
priv->rss.table[i] = ethtool_rxfh_indir_default(i,
rx_cnt);
- stmmac_set_half_duplex(priv);
stmmac_napi_add(dev);
if (netif_running(dev))
--
2.31.4
Powered by blists - more mailing lists