Message-ID: <20240412131104.322851-19-karol.kolacinski@intel.com>
Date: Fri, 12 Apr 2024 15:06:48 +0200
From: Karol Kolacinski <karol.kolacinski@...el.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: netdev@...r.kernel.org,
	anthony.l.nguyen@...el.com,
	jesse.brandeburg@...el.com,
	Sergey Temerkhanov <sergey.temerkhanov@...el.com>,
	Przemek Kitszel <przemyslaw.kitszel@...el.com>,
	Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
	Karol Kolacinski <karol.kolacinski@...el.com>
Subject: [PATCH v8 iwl-next 05/12] ice: Move CGU block

From: Sergey Temerkhanov <sergey.temerkhanov@...el.com>

Move CGU block to the beginning of ice_ptp_hw.c

Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@...el.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@...el.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@...el.com>
---
V7 -> V8: brought back P_REG_40B_HIGH_S due to 32 bit compatibility issue
V6 -> V7: - removed leftover code in ice_read_cgu_reg_e82x()
          - changed .data assignment in ice_write_cgu_reg_e82x()
          - restored u32 cast in ice_ptp_reset_ts_memory_quad_e82x() to avoid
            false positive warning
V5 -> V6: - adjusted returns in ice_read/write_cgu_reg_e82x()
          - added cgu_msg init when declaring in ice_read/write_cgu_reg_e82x()
          - changed TS_PHY_LOW_S to TS_PHY_LOW_M and adjusted with FIELD_PREP()
          - removed unncecessary casts

 drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 565 ++++++++++----------
 drivers/net/ethernet/intel/ice/ice_ptp_hw.h |   2 +-
 2 files changed, 279 insertions(+), 288 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index 3c0efdd3cb8a..4d5063e5a200 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -226,6 +226,281 @@ static u64 ice_ptp_read_src_incval(struct ice_hw *hw)
 	return ((u64)(hi & INCVAL_HIGH_M) << 32) | lo;
 }
 
+/**
+ * ice_read_cgu_reg_e82x - Read a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to read
+ * @val: storage for register value read
+ *
+ * Read the contents of a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static int ice_read_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 *val)
+{
+	struct ice_sbq_msg_input cgu_msg = {
+		.opcode = ice_sbq_msg_rd,
+		.dest_dev = cgu,
+		.msg_addr_low = addr
+	};
+	int err;
+
+	err = ice_sbq_rw_reg(hw, &cgu_msg);
+	if (err) {
+		ice_debug(hw, ICE_DBG_PTP, "Failed to read CGU register 0x%04x, err %d\n",
+			  addr, err);
+		return err;
+	}
+
+	*val = cgu_msg.data;
+
+	return 0;
+}
+
+/**
+ * ice_write_cgu_reg_e82x - Write a CGU register
+ * @hw: pointer to the HW struct
+ * @addr: Register address to write
+ * @val: value to write into the register
+ *
+ * Write the specified value to a register of the Clock Generation Unit. Only
+ * applicable to E822 devices.
+ */
+static int ice_write_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 val)
+{
+	struct ice_sbq_msg_input cgu_msg = {
+		.opcode = ice_sbq_msg_wr,
+		.dest_dev = cgu,
+		.msg_addr_low = addr,
+		.data = val
+	};
+	int err;
+
+	err = ice_sbq_rw_reg(hw, &cgu_msg);
+	if (err) {
+		ice_debug(hw, ICE_DBG_PTP, "Failed to write CGU register 0x%04x, err %d\n",
+			  addr, err);
+		return err;
+	}
+
+	return err;
+}
+
+/**
+ * ice_clk_freq_str - Convert time_ref_freq to string
+ * @clk_freq: Clock frequency
+ *
+ * Convert the specified TIME_REF clock frequency to a string.
+ */
+static const char *ice_clk_freq_str(enum ice_time_ref_freq clk_freq)
+{
+	switch (clk_freq) {
+	case ICE_TIME_REF_FREQ_25_000:
+		return "25 MHz";
+	case ICE_TIME_REF_FREQ_122_880:
+		return "122.88 MHz";
+	case ICE_TIME_REF_FREQ_125_000:
+		return "125 MHz";
+	case ICE_TIME_REF_FREQ_153_600:
+		return "153.6 MHz";
+	case ICE_TIME_REF_FREQ_156_250:
+		return "156.25 MHz";
+	case ICE_TIME_REF_FREQ_245_760:
+		return "245.76 MHz";
+	default:
+		return "Unknown";
+	}
+}
+
+/**
+ * ice_clk_src_str - Convert time_ref_src to string
+ * @clk_src: Clock source
+ *
+ * Convert the specified clock source to its string name.
+ */
+static const char *ice_clk_src_str(enum ice_clk_src clk_src)
+{
+	switch (clk_src) {
+	case ICE_CLK_SRC_TCX0:
+		return "TCX0";
+	case ICE_CLK_SRC_TIME_REF:
+		return "TIME_REF";
+	default:
+		return "Unknown";
+	}
+}
+
+/**
+ * ice_cfg_cgu_pll_e82x - Configure the Clock Generation Unit
+ * @hw: pointer to the HW struct
+ * @clk_freq: Clock frequency to program
+ * @clk_src: Clock source to select (TIME_REF, or TCX0)
+ *
+ * Configure the Clock Generation Unit with the desired clock frequency and
+ * time reference, enabling the PLL which drives the PTP hardware clock.
+ */
+static int ice_cfg_cgu_pll_e82x(struct ice_hw *hw,
+				enum ice_time_ref_freq clk_freq,
+				enum ice_clk_src clk_src)
+{
+	union tspll_ro_bwm_lf bwm_lf;
+	union nac_cgu_dword19 dw19;
+	union nac_cgu_dword22 dw22;
+	union nac_cgu_dword24 dw24;
+	union nac_cgu_dword9 dw9;
+	int err;
+
+	if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
+		dev_warn(ice_hw_to_dev(hw), "Invalid TIME_REF frequency %u\n",
+			 clk_freq);
+		return -EINVAL;
+	}
+
+	if (clk_src >= NUM_ICE_CLK_SRC) {
+		dev_warn(ice_hw_to_dev(hw), "Invalid clock source %u\n",
+			 clk_src);
+		return -EINVAL;
+	}
+
+	if (clk_src == ICE_CLK_SRC_TCX0 &&
+	    clk_freq != ICE_TIME_REF_FREQ_25_000) {
+		dev_warn(ice_hw_to_dev(hw),
+			 "TCX0 only supports 25 MHz frequency\n");
+		return -EINVAL;
+	}
+
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD9, &dw9.val);
+	if (err)
+		return err;
+
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
+	if (err)
+		return err;
+
+	err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+	if (err)
+		return err;
+
+	/* Log the current clock configuration */
+	ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+		  dw24.field.ts_pll_enable ? "enabled" : "disabled",
+		  ice_clk_src_str(dw24.field.time_ref_sel),
+		  ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+		  bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+	/* Disable the PLL before changing the clock source or frequency */
+	if (dw24.field.ts_pll_enable) {
+		dw24.field.ts_pll_enable = 0;
+
+		err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+		if (err)
+			return err;
+	}
+
+	/* Set the frequency */
+	dw9.field.time_ref_freq_sel = clk_freq;
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD9, dw9.val);
+	if (err)
+		return err;
+
+	/* Configure the TS PLL feedback divisor */
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD19, &dw19.val);
+	if (err)
+		return err;
+
+	dw19.field.tspll_fbdiv_intgr = e822_cgu_params[clk_freq].feedback_div;
+	dw19.field.tspll_ndivratio = 1;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD19, dw19.val);
+	if (err)
+		return err;
+
+	/* Configure the TS PLL post divisor */
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD22, &dw22.val);
+	if (err)
+		return err;
+
+	dw22.field.time1588clk_div = e822_cgu_params[clk_freq].post_pll_div;
+	dw22.field.time1588clk_sel_div2 = 0;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD22, dw22.val);
+	if (err)
+		return err;
+
+	/* Configure the TS PLL pre divisor and clock source */
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
+	if (err)
+		return err;
+
+	dw24.field.ref1588_ck_div = e822_cgu_params[clk_freq].refclk_pre_div;
+	dw24.field.tspll_fbdiv_frac = e822_cgu_params[clk_freq].frac_n_div;
+	dw24.field.time_ref_sel = clk_src;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+	if (err)
+		return err;
+
+	/* Finally, enable the PLL */
+	dw24.field.ts_pll_enable = 1;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+	if (err)
+		return err;
+
+	/* Wait to verify if the PLL locks */
+	usleep_range(1000, 5000);
+
+	err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
+	if (err)
+		return err;
+
+	if (!bwm_lf.field.plllock_true_lock_cri) {
+		dev_warn(ice_hw_to_dev(hw), "CGU PLL failed to lock\n");
+		return -EBUSY;
+	}
+
+	/* Log the current clock configuration */
+	ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+		  dw24.field.ts_pll_enable ? "enabled" : "disabled",
+		  ice_clk_src_str(dw24.field.time_ref_sel),
+		  ice_clk_freq_str(dw9.field.time_ref_freq_sel),
+		  bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
+
+	return 0;
+}
+
+/**
+ * ice_init_cgu_e82x - Initialize CGU with settings from firmware
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the Clock Generation Unit of the E822 device.
+ */
+static int ice_init_cgu_e82x(struct ice_hw *hw)
+{
+	struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
+	union tspll_cntr_bist_settings cntr_bist;
+	int err;
+
+	err = ice_read_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
+				    &cntr_bist.val);
+	if (err)
+		return err;
+
+	/* Disable sticky lock detection so lock err reported is accurate */
+	cntr_bist.field.i_plllock_sel_0 = 0;
+	cntr_bist.field.i_plllock_sel_1 = 0;
+
+	err = ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
+				     cntr_bist.val);
+	if (err)
+		return err;
+
+	/* Configure the CGU PLL using the parameters from the function
+	 * capabilities.
+	 */
+	return ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
+				   (enum ice_clk_src)ts_info->clk_src);
+}
+
 /**
  * ice_ptp_tmr_cmd_to_src_reg - Convert to source timer command value
  * @hw: pointer to HW struct
@@ -623,8 +898,7 @@ ice_write_40b_phy_reg_e82x(struct ice_hw *hw, u8 port, u16 low_addr, u64 val)
 			  low_addr);
 		return -EINVAL;
 	}
-
-	low = (u32)(val & P_REG_40B_LOW_M);
+	low = FIELD_GET(P_REG_40B_LOW_M, val);
 	high = (u32)(val >> P_REG_40B_HIGH_S);
 
 	err = ice_write_phy_reg_e82x(hw, port, low_addr, low);
@@ -830,7 +1104,7 @@ ice_read_phy_tstamp_e82x(struct ice_hw *hw, u8 quad, u8 idx, u64 *tstamp)
 	 * lower 8 bits in the low register, and the upper 32 bits in the high
 	 * register.
 	 */
-	*tstamp = ((u64)hi) << TS_PHY_HIGH_S | ((u64)lo & TS_PHY_LOW_M);
+	*tstamp = FIELD_PREP(TS_PHY_HIGH_M, hi) | FIELD_PREP(TS_PHY_LOW_M, lo);
 
 	return 0;
 }
@@ -884,7 +1158,7 @@ ice_clear_phy_tstamp_e82x(struct ice_hw *hw, u8 quad, u8 idx)
 void ice_ptp_reset_ts_memory_quad_e82x(struct ice_hw *hw, u8 quad)
 {
 	ice_write_quad_reg_e82x(hw, quad, Q_REG_TS_CTRL, Q_REG_TS_CTRL_M);
-	ice_write_quad_reg_e82x(hw, quad, Q_REG_TS_CTRL, ~(u32)Q_REG_TS_CTRL_M);
+	ice_write_quad_reg_e82x(hw, quad, Q_REG_TS_CTRL, (u32)~Q_REG_TS_CTRL_M);
 }
 
 /**
@@ -899,289 +1173,6 @@ static void ice_ptp_reset_ts_memory_e82x(struct ice_hw *hw)
 		ice_ptp_reset_ts_memory_quad_e82x(hw, quad);
 }
 
-/**
- * ice_read_cgu_reg_e82x - Read a CGU register
- * @hw: pointer to the HW struct
- * @addr: Register address to read
- * @val: storage for register value read
- *
- * Read the contents of a register of the Clock Generation Unit. Only
- * applicable to E822 devices.
- */
-static int
-ice_read_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 *val)
-{
-	struct ice_sbq_msg_input cgu_msg;
-	int err;
-
-	cgu_msg.opcode = ice_sbq_msg_rd;
-	cgu_msg.dest_dev = cgu;
-	cgu_msg.msg_addr_low = addr;
-	cgu_msg.msg_addr_high = 0x0;
-
-	err = ice_sbq_rw_reg(hw, &cgu_msg);
-	if (err) {
-		ice_debug(hw, ICE_DBG_PTP, "Failed to read CGU register 0x%04x, err %d\n",
-			  addr, err);
-		return err;
-	}
-
-	*val = cgu_msg.data;
-
-	return err;
-}
-
-/**
- * ice_write_cgu_reg_e82x - Write a CGU register
- * @hw: pointer to the HW struct
- * @addr: Register address to write
- * @val: value to write into the register
- *
- * Write the specified value to a register of the Clock Generation Unit. Only
- * applicable to E822 devices.
- */
-static int
-ice_write_cgu_reg_e82x(struct ice_hw *hw, u32 addr, u32 val)
-{
-	struct ice_sbq_msg_input cgu_msg;
-	int err;
-
-	cgu_msg.opcode = ice_sbq_msg_wr;
-	cgu_msg.dest_dev = cgu;
-	cgu_msg.msg_addr_low = addr;
-	cgu_msg.msg_addr_high = 0x0;
-	cgu_msg.data = val;
-
-	err = ice_sbq_rw_reg(hw, &cgu_msg);
-	if (err) {
-		ice_debug(hw, ICE_DBG_PTP, "Failed to write CGU register 0x%04x, err %d\n",
-			  addr, err);
-		return err;
-	}
-
-	return err;
-}
-
-/**
- * ice_clk_freq_str - Convert time_ref_freq to string
- * @clk_freq: Clock frequency
- *
- * Convert the specified TIME_REF clock frequency to a string.
- */
-static const char *ice_clk_freq_str(u8 clk_freq)
-{
-	switch ((enum ice_time_ref_freq)clk_freq) {
-	case ICE_TIME_REF_FREQ_25_000:
-		return "25 MHz";
-	case ICE_TIME_REF_FREQ_122_880:
-		return "122.88 MHz";
-	case ICE_TIME_REF_FREQ_125_000:
-		return "125 MHz";
-	case ICE_TIME_REF_FREQ_153_600:
-		return "153.6 MHz";
-	case ICE_TIME_REF_FREQ_156_250:
-		return "156.25 MHz";
-	case ICE_TIME_REF_FREQ_245_760:
-		return "245.76 MHz";
-	default:
-		return "Unknown";
-	}
-}
-
-/**
- * ice_clk_src_str - Convert time_ref_src to string
- * @clk_src: Clock source
- *
- * Convert the specified clock source to its string name.
- */
-static const char *ice_clk_src_str(u8 clk_src)
-{
-	switch ((enum ice_clk_src)clk_src) {
-	case ICE_CLK_SRC_TCX0:
-		return "TCX0";
-	case ICE_CLK_SRC_TIME_REF:
-		return "TIME_REF";
-	default:
-		return "Unknown";
-	}
-}
-
-/**
- * ice_cfg_cgu_pll_e82x - Configure the Clock Generation Unit
- * @hw: pointer to the HW struct
- * @clk_freq: Clock frequency to program
- * @clk_src: Clock source to select (TIME_REF, or TCX0)
- *
- * Configure the Clock Generation Unit with the desired clock frequency and
- * time reference, enabling the PLL which drives the PTP hardware clock.
- */
-static int
-ice_cfg_cgu_pll_e82x(struct ice_hw *hw, enum ice_time_ref_freq clk_freq,
-		     enum ice_clk_src clk_src)
-{
-	union tspll_ro_bwm_lf bwm_lf;
-	union nac_cgu_dword19 dw19;
-	union nac_cgu_dword22 dw22;
-	union nac_cgu_dword24 dw24;
-	union nac_cgu_dword9 dw9;
-	int err;
-
-	if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
-		dev_warn(ice_hw_to_dev(hw), "Invalid TIME_REF frequency %u\n",
-			 clk_freq);
-		return -EINVAL;
-	}
-
-	if (clk_src >= NUM_ICE_CLK_SRC) {
-		dev_warn(ice_hw_to_dev(hw), "Invalid clock source %u\n",
-			 clk_src);
-		return -EINVAL;
-	}
-
-	if (clk_src == ICE_CLK_SRC_TCX0 &&
-	    clk_freq != ICE_TIME_REF_FREQ_25_000) {
-		dev_warn(ice_hw_to_dev(hw),
-			 "TCX0 only supports 25 MHz frequency\n");
-		return -EINVAL;
-	}
-
-	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD9, &dw9.val);
-	if (err)
-		return err;
-
-	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
-	if (err)
-		return err;
-
-	err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
-	if (err)
-		return err;
-
-	/* Log the current clock configuration */
-	ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
-		  dw24.field.ts_pll_enable ? "enabled" : "disabled",
-		  ice_clk_src_str(dw24.field.time_ref_sel),
-		  ice_clk_freq_str(dw9.field.time_ref_freq_sel),
-		  bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
-
-	/* Disable the PLL before changing the clock source or frequency */
-	if (dw24.field.ts_pll_enable) {
-		dw24.field.ts_pll_enable = 0;
-
-		err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
-		if (err)
-			return err;
-	}
-
-	/* Set the frequency */
-	dw9.field.time_ref_freq_sel = clk_freq;
-	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD9, dw9.val);
-	if (err)
-		return err;
-
-	/* Configure the TS PLL feedback divisor */
-	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD19, &dw19.val);
-	if (err)
-		return err;
-
-	dw19.field.tspll_fbdiv_intgr = e822_cgu_params[clk_freq].feedback_div;
-	dw19.field.tspll_ndivratio = 1;
-
-	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD19, dw19.val);
-	if (err)
-		return err;
-
-	/* Configure the TS PLL post divisor */
-	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD22, &dw22.val);
-	if (err)
-		return err;
-
-	dw22.field.time1588clk_div = e822_cgu_params[clk_freq].post_pll_div;
-	dw22.field.time1588clk_sel_div2 = 0;
-
-	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD22, dw22.val);
-	if (err)
-		return err;
-
-	/* Configure the TS PLL pre divisor and clock source */
-	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
-	if (err)
-		return err;
-
-	dw24.field.ref1588_ck_div = e822_cgu_params[clk_freq].refclk_pre_div;
-	dw24.field.tspll_fbdiv_frac = e822_cgu_params[clk_freq].frac_n_div;
-	dw24.field.time_ref_sel = clk_src;
-
-	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
-	if (err)
-		return err;
-
-	/* Finally, enable the PLL */
-	dw24.field.ts_pll_enable = 1;
-
-	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
-	if (err)
-		return err;
-
-	/* Wait to verify if the PLL locks */
-	usleep_range(1000, 5000);
-
-	err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_BWM_LF, &bwm_lf.val);
-	if (err)
-		return err;
-
-	if (!bwm_lf.field.plllock_true_lock_cri) {
-		dev_warn(ice_hw_to_dev(hw), "CGU PLL failed to lock\n");
-		return -EBUSY;
-	}
-
-	/* Log the current clock configuration */
-	ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
-		  dw24.field.ts_pll_enable ? "enabled" : "disabled",
-		  ice_clk_src_str(dw24.field.time_ref_sel),
-		  ice_clk_freq_str(dw9.field.time_ref_freq_sel),
-		  bwm_lf.field.plllock_true_lock_cri ? "locked" : "unlocked");
-
-	return 0;
-}
-
-/**
- * ice_init_cgu_e82x - Initialize CGU with settings from firmware
- * @hw: pointer to the HW structure
- *
- * Initialize the Clock Generation Unit of the E822 device.
- */
-static int ice_init_cgu_e82x(struct ice_hw *hw)
-{
-	struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
-	union tspll_cntr_bist_settings cntr_bist;
-	int err;
-
-	err = ice_read_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
-				    &cntr_bist.val);
-	if (err)
-		return err;
-
-	/* Disable sticky lock detection so lock err reported is accurate */
-	cntr_bist.field.i_plllock_sel_0 = 0;
-	cntr_bist.field.i_plllock_sel_1 = 0;
-
-	err = ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
-				     cntr_bist.val);
-	if (err)
-		return err;
-
-	/* Configure the CGU PLL using the parameters from the function
-	 * capabilities.
-	 */
-	err = ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
-				   (enum ice_clk_src)ts_info->clk_src);
-	if (err)
-		return err;
-
-	return 0;
-}
-
 /**
  * ice_ptp_set_vernier_wl - Set the window length for vernier calibration
  * @hw: pointer to the HW struct
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
index 5223e17d2806..2d8ba9c2251d 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
@@ -377,7 +377,7 @@ int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id,
 #define P_REG_TIMETUS_L			0x410
 #define P_REG_TIMETUS_U			0x414
 
-#define P_REG_40B_LOW_M			0xFF
+#define P_REG_40B_LOW_M			GENMASK(7, 0)
 #define P_REG_40B_HIGH_S		8
 
 /* PHY window length registers */
-- 
2.43.0

Powered by blists - more mailing lists