[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v2-2-1a7649c4d3b6@arinc9.com>
Date: Sun, 14 Apr 2024 09:07:42 +0300
From: Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@...nel.org>
To: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
mithat.guner@...ont.com, erkin.bozoglu@...ont.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH net-next v2 2/2] net: dsa: mt7530: simplify core operations
From: Arınç ÜNAL <arinc.unal@...nc9.com>
The core_rmw() function calls core_read_mmd_indirect() to read the
requested register, and then calls core_write_mmd_indirect() to write the
requested value to the register. Because Clause 22 is used to access Clause
45 registers, some operations on core_write_mmd_indirect() are
unnecessarily run. Get rid of core_read_mmd_indirect() and
core_write_mmd_indirect(), and run only the necessary operations on
core_write() and core_rmw().
Reviewed-by: Daniel Golle <daniel@...rotopia.org>
Tested-by: Daniel Golle <daniel@...rotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
drivers/net/dsa/mt7530.c | 108 +++++++++++++++++++----------------------------
1 file changed, 43 insertions(+), 65 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fefa6dd151fa..2650eacf87a7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -74,116 +74,94 @@ static const struct mt7530_mib_desc mt7530_mib[] = {
MIB_DESC(1, 0xb8, "RxArlDrop"),
};
-/* Since phy_device has not yet been created and
- * phy_{read,write}_mmd_indirect is not available, we provide our own
- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
- * to complete this function.
- */
-static int
-core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
+static void
+mt7530_mutex_lock(struct mt7530_priv *priv)
+{
+ if (priv->bus)
+ mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_mutex_unlock(struct mt7530_priv *priv)
+{
+ if (priv->bus)
+ mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static void
+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
struct mii_bus *bus = priv->bus;
- int value, ret;
+ int ret;
+
+ mt7530_mutex_lock(priv);
/* Write the desired MMD Devad */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad);
+ MII_MMD_CTRL, MDIO_MMD_VEND2);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, prtad);
+ MII_MMD_DATA, reg);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+ MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
- /* Read the content of the MMD's selected register */
- value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA);
-
- return value;
+ /* Write the data into MMD's selected register */
+ ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA, val);
err:
- dev_err(&bus->dev, "failed to read mmd register\n");
+ if (ret < 0)
+ dev_err(&bus->dev, "failed to write mmd register\n");
- return ret;
+ mt7530_mutex_unlock(priv);
}
-static int
-core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
- int devad, u32 data)
+static void
+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
{
struct mii_bus *bus = priv->bus;
+ u32 val;
int ret;
+ mt7530_mutex_lock(priv);
+
/* Write the desired MMD Devad */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad);
+ MII_MMD_CTRL, MDIO_MMD_VEND2);
if (ret < 0)
goto err;
/* Write the desired MMD register address */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, prtad);
+ MII_MMD_DATA, reg);
if (ret < 0)
goto err;
/* Select the Function : DATA with no post increment */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
+ MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
if (ret < 0)
goto err;
+ /* Read the content of the MMD's selected register */
+ val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
+ MII_MMD_DATA);
+ val &= ~mask;
+ val |= set;
/* Write the data into MMD's selected register */
ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->phy_addr),
- MII_MMD_DATA, data);
+ MII_MMD_DATA, val);
err:
if (ret < 0)
- dev_err(&bus->dev,
- "failed to write mmd register\n");
- return ret;
-}
-
-static void
-mt7530_mutex_lock(struct mt7530_priv *priv)
-{
- if (priv->bus)
- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-}
-
-static void
-mt7530_mutex_unlock(struct mt7530_priv *priv)
-{
- if (priv->bus)
- mutex_unlock(&priv->bus->mdio_lock);
-}
-
-static void
-core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7530_mutex_lock(priv);
-
- core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-
- mt7530_mutex_unlock(priv);
-}
-
-static void
-core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
-{
- u32 val;
-
- mt7530_mutex_lock(priv);
-
- val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
- val &= ~mask;
- val |= set;
- core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
+ dev_err(&bus->dev, "failed to write mmd register\n");
mt7530_mutex_unlock(priv);
}
--
2.40.1
Powered by blists - more mailing lists