| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240415104701.4772-5-fujita.tomonori@gmail.com>
Date: Mon, 15 Apr 2024 19:47:01 +0900
From: FUJITA Tomonori <fujita.tomonori@...il.com>
To: netdev@...r.kernel.org
Cc: andrew@...n.ch,
rust-for-linux@...r.kernel.org,
tmgross@...ch.edu
Subject: [PATCH net-next v1 4/4] net: phy: add Applied Micro QT2025 PHY driver
This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.
The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.
This has been tested with Edimax EN-9320SFP+ 10G network adapter.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@...il.com>
---
MAINTAINERS | 7 ++++
drivers/net/phy/Kconfig | 6 ++++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/qt2025.rs | 75 +++++++++++++++++++++++++++++++++++++++
rust/uapi/uapi_helper.h | 1 +
5 files changed, 90 insertions(+)
create mode 100644 drivers/net/phy/qt2025.rs
diff --git a/MAINTAINERS b/MAINTAINERS
index 5ba3fe6ac09c..f2d86e221ba3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1540,6 +1540,13 @@ F: Documentation/admin-guide/perf/xgene-pmu.rst
F: Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
F: drivers/perf/xgene_pmu.c
+APPLIED MICRO QT2025 PHY DRIVER
+M: FUJITA Tomonori <fujita.tomonori@...il.com>
+L: netdev@...r.kernel.org
+L: rust-for-linux@...r.kernel.org
+S: Maintained
+F: drivers/net/phy/qt2025.rs
+
APTINA CAMERA SENSOR PLL
M: Laurent Pinchart <Laurent.pinchart@...asonboard.com>
L: linux-media@...r.kernel.org
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 3ad04170aa4e..8293c3d14229 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -110,6 +110,12 @@ config ADIN1100_PHY
Currently supports the:
- ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
+config AMCC_QT2025_PHY
+ tristate "AMCC QT2025 PHY"
+ depends on RUST_PHYLIB_ABSTRACTIONS
+ help
+ Adds support for the Applied Micro Circuits Corporation QT2025 PHY.
+
source "drivers/net/phy/aquantia/Kconfig"
config AX88796B_PHY
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 1d8be374915f..75d0b07a392a 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_ADIN_PHY) += adin.o
obj-$(CONFIG_ADIN1100_PHY) += adin1100.o
obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o
obj-$(CONFIG_AMD_PHY) += amd.o
+obj-$(CONFIG_AMCC_QT2025_PHY) += qt2025.o
obj-$(CONFIG_AQUANTIA_PHY) += aquantia/
ifdef CONFIG_AX88796B_RUST_PHY
obj-$(CONFIG_AX88796B_PHY) += ax88796b_rust.o
diff --git a/drivers/net/phy/qt2025.rs b/drivers/net/phy/qt2025.rs
new file mode 100644
index 000000000000..e42b77753717
--- /dev/null
+++ b/drivers/net/phy/qt2025.rs
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) Tehuti Networks Ltd.
+// Copyright (C) 2024 FUJITA Tomonori <fujita.tomonori@...il.com>
+
+//! Applied Micro Circuits Corporation QT2025 PHY driver
+use kernel::c_str;
+use kernel::net::phy::{self, DeviceId, Driver, Firmware};
+use kernel::prelude::*;
+use kernel::uapi;
+
+kernel::module_phy_driver! {
+ drivers: [PhyQT2025],
+ device_table: [
+ DeviceId::new_with_driver::<PhyQT2025>(),
+ ],
+ name: "qt2025_phy",
+ author: "FUJITA Tomonori <fujita.tomonori@...il.com>",
+ description: "AMCC QT2025 PHY driver",
+ license: "GPL",
+}
+
+const MDIO_MMD_PMAPMD: u8 = uapi::MDIO_MMD_PMAPMD as u8;
+const MDIO_MMD_PCS: u8 = uapi::MDIO_MMD_PCS as u8;
+const MDIO_MMD_PHYXS: u8 = uapi::MDIO_MMD_PHYXS as u8;
+
+struct PhyQT2025;
+
+#[vtable]
+impl Driver for PhyQT2025 {
+ const NAME: &'static CStr = c_str!("QT2025 10Gpbs SFP+");
+ const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x0043A400);
+
+ fn config_init(dev: &mut phy::Device) -> Result<()> {
+ let fw = Firmware::new(c_str!("qt2025-2.0.3.3.fw"), dev)?;
+
+ let phy_id = dev.c45_read(MDIO_MMD_PMAPMD, 0xd001)?;
+ if (phy_id >> 8) & 0xff != 0xb3 {
+ return Ok(());
+ }
+
+ dev.c45_write(MDIO_MMD_PMAPMD, 0xC300, 0x0000)?;
+ dev.c45_write(MDIO_MMD_PMAPMD, 0xC302, 0x4)?;
+ dev.c45_write(MDIO_MMD_PMAPMD, 0xC319, 0x0038)?;
+
+ dev.c45_write(MDIO_MMD_PMAPMD, 0xC31A, 0x0098)?;
+ dev.c45_write(MDIO_MMD_PCS, 0x0026, 0x0E00)?;
+
+ dev.c45_write(MDIO_MMD_PCS, 0x0027, 0x0893)?;
+
+ dev.c45_write(MDIO_MMD_PCS, 0x0028, 0xA528)?;
+ dev.c45_write(MDIO_MMD_PCS, 0x0029, 0x03)?;
+ dev.c45_write(MDIO_MMD_PMAPMD, 0xC30A, 0x06E1)?;
+ dev.c45_write(MDIO_MMD_PMAPMD, 0xC300, 0x0002)?;
+ dev.c45_write(MDIO_MMD_PCS, 0xE854, 0x00C0)?;
+
+ let mut j = 0x8000;
+ let mut a = MDIO_MMD_PCS;
+ for (i, val) in fw.data().iter().enumerate() {
+ if i == 0x4000 {
+ a = MDIO_MMD_PHYXS;
+ j = 0x8000;
+ }
+ dev.c45_write(a, j, (*val).into())?;
+
+ j += 1;
+ }
+ dev.c45_write(MDIO_MMD_PCS, 0xe854, 0x0040)?;
+
+ Ok(())
+ }
+
+ fn read_status(dev: &mut phy::Device) -> Result<u16> {
+ dev.genphy_c45_read_status()
+ }
+}
diff --git a/rust/uapi/uapi_helper.h b/rust/uapi/uapi_helper.h
index 08f5e9334c9e..76d3f103e764 100644
--- a/rust/uapi/uapi_helper.h
+++ b/rust/uapi/uapi_helper.h
@@ -7,5 +7,6 @@
*/
#include <uapi/asm-generic/ioctl.h>
+#include <uapi/linux/mdio.h>
#include <uapi/linux/mii.h>
#include <uapi/linux/ethtool.h>
--
2.34.1
Powered by blists - more mailing lists