lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240416203723.104062-2-rrameshbabu@nvidia.com>
Date: Tue, 16 Apr 2024 13:37:16 -0700
From: Rahul Rameshbabu <rrameshbabu@...dia.com>
To: netdev@...r.kernel.org
Cc: Vadim Fedorenko <vadim.fedorenko@...ux.dev>,
	Jacob Keller <jacob.e.keller@...el.com>,
	Paolo Abeni <pabeni@...hat.com>,
	Jakub Kicinski <kuba@...nel.org>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Gal Pressman <gal@...dia.com>,
	Tariq Toukan <tariqt@...dia.com>,
	Saeed Mahameed <saeedm@...dia.com>,
	Carolina Jubran <cjubran@...dia.com>,
	Cosmin Ratiu <cratiu@...dia.com>,
	Michal Kubecek <mkubecek@...e.cz>,
	Rahul Rameshbabu <rrameshbabu@...dia.com>
Subject: [PATCH ethtool-next 1/2] update UAPI header copies

Update to kernel commit 3e6d3f6f870e.

Signed-off-by: Rahul Rameshbabu <rrameshbabu@...dia.com>
Reviewed-by: Carolina Jubran <cjubran@...dia.com>
Reviewed-by: Cosmin Ratiu <cratiu@...dia.com>
---
 uapi/linux/ethtool.h         | 64 ++++++++++++++++++++++++++++++++++++
 uapi/linux/ethtool_netlink.h | 30 +++++++++++++----
 uapi/linux/if_link.h         |  1 +
 3 files changed, 89 insertions(+), 6 deletions(-)

diff --git a/uapi/linux/ethtool.h b/uapi/linux/ethtool.h
index 70f2b90..4d1738a 100644
--- a/uapi/linux/ethtool.h
+++ b/uapi/linux/ethtool.h
@@ -2021,6 +2021,53 @@ static __inline__ int ethtool_validate_duplex(__u8 duplex)
 #define	IPV4_FLOW	0x10	/* hash only */
 #define	IPV6_FLOW	0x11	/* hash only */
 #define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+
+/* Used for GTP-U IPv4 and IPv6.
+ * The format of GTP packets only includes
+ * elements such as TEID and GTP version.
+ * It is primarily intended for data communication of the UE.
+ */
+#define GTPU_V4_FLOW 0x13	/* hash only */
+#define GTPU_V6_FLOW 0x14	/* hash only */
+
+/* Use for GTP-C IPv4 and v6.
+ * The format of these GTP packets does not include TEID.
+ * Primarily expected to be used for communication
+ * to create sessions for UE data communication,
+ * commonly referred to as CSR (Create Session Request).
+ */
+#define GTPC_V4_FLOW 0x15	/* hash only */
+#define GTPC_V6_FLOW 0x16	/* hash only */
+
+/* Use for GTP-C IPv4 and v6.
+ * Unlike GTPC_V4_FLOW, the format of these GTP packets includes TEID.
+ * After session creation, it becomes this packet.
+ * This is mainly used for requests to realize UE handover.
+ */
+#define GTPC_TEID_V4_FLOW 0x17	/* hash only */
+#define GTPC_TEID_V6_FLOW 0x18	/* hash only */
+
+/* Use for GTP-U and extended headers for the PSC (PDU Session Container).
+ * The format of these GTP packets includes TEID and QFI.
+ * In 5G communication using UPF (User Plane Function),
+ * data communication with this extended header is performed.
+ */
+#define GTPU_EH_V4_FLOW 0x19	/* hash only */
+#define GTPU_EH_V6_FLOW 0x1a	/* hash only */
+
+/* Use for GTP-U IPv4 and v6 PSC (PDU Session Container) extended headers.
+ * This differs from GTPU_EH_V(4|6)_FLOW in that it is distinguished by
+ * UL/DL included in the PSC.
+ * There are differences in the data included based on Downlink/Uplink,
+ * and can be used to distinguish packets.
+ * The functions described so far are useful when you want to
+ * handle communication from the mobile network in UPF, PGW, etc.
+ */
+#define GTPU_UL_V4_FLOW 0x1b	/* hash only */
+#define GTPU_UL_V6_FLOW 0x1c	/* hash only */
+#define GTPU_DL_V4_FLOW 0x1d	/* hash only */
+#define GTPU_DL_V6_FLOW 0x1e	/* hash only */
+
 /* Flag to enable additional fields in struct ethtool_rx_flow_spec */
 #define	FLOW_EXT	0x80000000
 #define	FLOW_MAC_EXT	0x40000000
@@ -2035,6 +2082,7 @@ static __inline__ int ethtool_validate_duplex(__u8 duplex)
 #define	RXH_IP_DST	(1 << 5)
 #define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
 #define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_GTP_TEID	(1 << 8) /* teid in case of GTP */
 #define	RXH_DISCARD	(1 << 31)
 
 #define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
@@ -2218,4 +2266,20 @@ struct ethtool_link_settings {
 	 * __u32 map_lp_advertising[link_mode_masks_nwords];
 	 */
 };
+
+/**
+ * enum phy_upstream - Represents the upstream component a given PHY device
+ * is connected to, as in what is on the other end of the MII bus. Most PHYs
+ * will be attached to an Ethernet MAC controller, but in some cases, there's
+ * an intermediate PHY used as a media-converter, which will driver another
+ * MII interface as its output.
+ * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port,
+ *		      or ethernet controller)
+ * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter)
+ */
+enum phy_upstream {
+	PHY_UPSTREAM_MAC,
+	PHY_UPSTREAM_PHY,
+};
+
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/uapi/linux/ethtool_netlink.h b/uapi/linux/ethtool_netlink.h
index 447d922..2503b26 100644
--- a/uapi/linux/ethtool_netlink.h
+++ b/uapi/linux/ethtool_netlink.h
@@ -117,12 +117,11 @@ enum {
 
 /* request header */
 
-/* use compact bitsets in reply */
-#define ETHTOOL_FLAG_COMPACT_BITSETS	(1 << 0)
-/* provide optional reply for SET or ACT requests */
-#define ETHTOOL_FLAG_OMIT_REPLY	(1 << 1)
-/* request statistics, if supported by the driver */
-#define ETHTOOL_FLAG_STATS		(1 << 2)
+enum ethtool_header_flags {
+	ETHTOOL_FLAG_COMPACT_BITSETS	= 1 << 0,	/* use compact bitsets in reply */
+	ETHTOOL_FLAG_OMIT_REPLY		= 1 << 1,	/* provide optional reply for SET or ACT requests */
+	ETHTOOL_FLAG_STATS		= 1 << 2,	/* request statistics, if supported by the driver */
+};
 
 #define ETHTOOL_FLAG_ALL (ETHTOOL_FLAG_COMPACT_BITSETS | \
 			  ETHTOOL_FLAG_OMIT_REPLY | \
@@ -133,6 +132,7 @@ enum {
 	ETHTOOL_A_HEADER_DEV_INDEX,		/* u32 */
 	ETHTOOL_A_HEADER_DEV_NAME,		/* string */
 	ETHTOOL_A_HEADER_FLAGS,			/* u32 - ETHTOOL_FLAG_* */
+	ETHTOOL_A_HEADER_PHY_INDEX,		/* u32 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_HEADER_CNT,
@@ -478,12 +478,26 @@ enum {
 	ETHTOOL_A_TSINFO_TX_TYPES,			/* bitset */
 	ETHTOOL_A_TSINFO_RX_FILTERS,			/* bitset */
 	ETHTOOL_A_TSINFO_PHC_INDEX,			/* u32 */
+	ETHTOOL_A_TSINFO_STATS,				/* nest - _A_TSINFO_STAT */
 
 	/* add new constants above here */
 	__ETHTOOL_A_TSINFO_CNT,
 	ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1)
 };
 
+enum {
+	ETHTOOL_A_TS_STAT_UNSPEC,
+
+	ETHTOOL_A_TS_STAT_TX_PKTS,			/* uint */
+	ETHTOOL_A_TS_STAT_TX_LOST,			/* uint */
+	ETHTOOL_A_TS_STAT_TX_ERR,			/* uint */
+
+	/* add new constants above here */
+	__ETHTOOL_A_TS_STAT_CNT,
+	ETHTOOL_A_TS_STAT_MAX = (__ETHTOOL_A_TS_STAT_CNT - 1)
+
+};
+
 /* PHC VCLOCKS */
 
 enum {
@@ -515,6 +529,10 @@ enum {
 	ETHTOOL_A_CABLE_RESULT_CODE_OPEN,
 	ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT,
 	ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT,
+	/* detected reflection caused by the impedance discontinuity between
+	 * a regular 100 Ohm cable and a part with the abnormal impedance value
+	 */
+	ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH,
 };
 
 enum {
diff --git a/uapi/linux/if_link.h b/uapi/linux/if_link.h
index d17271f..ff4ceea 100644
--- a/uapi/linux/if_link.h
+++ b/uapi/linux/if_link.h
@@ -1503,6 +1503,7 @@ enum {
 	IFLA_BOND_AD_LACP_ACTIVE,
 	IFLA_BOND_MISSED_MAX,
 	IFLA_BOND_NS_IP6_TARGET,
+	IFLA_BOND_COUPLED_CONTROL,
 	__IFLA_BOND_MAX,
 };
 
-- 
2.42.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ