lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240417205048.3542839-3-paweldembicki@gmail.com>
Date: Wed, 17 Apr 2024 22:50:45 +0200
From: Pawel Dembicki <paweldembicki@...il.com>
To: netdev@...r.kernel.org
Cc: Pawel Dembicki <paweldembicki@...il.com>,
	Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Russell King <linux@...linux.org.uk>,
	linux-kernel@...r.kernel.org
Subject: [PATCH net-next v2 2/5] net: dsa: vsc73xx: convert to PHYLINK

This patch replaces the adjust_link api with the phylink apis that provide
equivalent functionality.

The remaining functionality from the adjust_link is now covered in the
mac_link_* and mac_config from phylink_mac_ops structure.

Removes:
.adjust_link
Adds phylink_mac_ops structure:
.mac_config
.mac_link_up
.mac_link_down

Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
---
v2:
  - use 'phylink_mac_ops' structure instead '.phylink_mac*'

 drivers/net/dsa/vitesse-vsc73xx-core.c | 242 ++++++++++++-------------
 1 file changed, 116 insertions(+), 126 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index ab5771d4d828..3f8edac9aa5c 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -717,51 +717,44 @@ static void vsc73xx_init_port(struct vsc73xx *vsc, int port)
 		      port, VSC73XX_C_RX0, 0);
 }
 
-static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc,
-				       int port, struct phy_device *phydev,
-				       u32 initval)
+static void vsc73xx_reset_port(struct vsc73xx *vsc, int port, u32 initval)
 {
-	u32 val = initval;
-	u8 seed;
-
-	/* Reset this port FIXME: break out subroutine */
-	val |= VSC73XX_MAC_CFG_RESET;
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
-
-	/* Seed the port randomness with randomness */
-	get_random_bytes(&seed, 1);
-	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
-	val |= VSC73XX_MAC_CFG_SEED_LOAD;
-	val |= VSC73XX_MAC_CFG_WEXC_DIS;
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+	int ret, err;
+	u32 val;
 
-	/* Flow control for the PHY facing ports:
-	 * Use a zero delay pause frame when pause condition is left
-	 * Obey pause control frames
-	 * When generating pause frames, use 0xff as pause value
-	 */
-	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
-		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
-		      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
-		      0xff);
+	/* Disable RX on this port */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+			    VSC73XX_MAC_CFG,
+			    VSC73XX_MAC_CFG_RX_EN, 0);
 
-	/* Disallow backward dropping of frames from this port */
+	/* Discard packets */
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-			    VSC73XX_SBACKWDROP, BIT(port), 0);
+			    VSC73XX_ARBDISC, BIT(port), BIT(port));
+
+	/* Wait until queue is empty */
+	ret = read_poll_timeout(vsc73xx_read, err,
+				err < 0 || (val & BIT(port)),
+				VSC73XX_POLL_SLEEP_US,
+				VSC73XX_POLL_TIMEOUT_US, false,
+				vsc, VSC73XX_BLOCK_ARBITER, 0,
+				VSC73XX_ARBEMPTY, &val);
+	if (ret)
+		dev_err(vsc->dev,
+			"timeout waiting for block arbiter\n");
+	else if (err < 0)
+		dev_err(vsc->dev, "error reading arbiter\n");
 
-	/* Enable TX, RX, deassert reset, stop loading seed */
-	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
-			    VSC73XX_MAC_CFG,
-			    VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
-			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
-			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
+	/* Put this port into reset */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
+		      VSC73XX_MAC_CFG_RESET | initval);
 }
 
-static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
-				struct phy_device *phydev)
+static void vsc73xx_mac_config(struct phylink_config *config, unsigned int mode,
+			       const struct phylink_link_state *state)
 {
-	struct vsc73xx *vsc = ds->priv;
-	u32 val;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct vsc73xx *vsc = dp->ds->priv;
+	int port = dp->index;
 
 	/* Special handling of the CPU-facing port */
 	if (port == CPU_PORT) {
@@ -778,102 +771,93 @@ static void vsc73xx_adjust_link(struct dsa_switch *ds, int port,
 			      VSC73XX_ADVPORTM_ENA_GTX |
 			      VSC73XX_ADVPORTM_DDR_MODE);
 	}
+}
+
+static void vsc73xx_mac_link_down(struct phylink_config *config,
+				  unsigned int mode, phy_interface_t interface)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct vsc73xx *vsc = dp->ds->priv;
+	int port = dp->index;
 
-	/* This is the MAC confiuration that always need to happen
-	 * after a PHY or the CPU port comes up or down.
+	/* This routine is described in the datasheet (below ARBDISC register
+	 * description)
 	 */
-	if (!phydev->link) {
-		int ret, err;
-
-		dev_dbg(vsc->dev, "port %d: went down\n",
-			port);
-
-		/* Disable RX on this port */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
-				    VSC73XX_MAC_CFG,
-				    VSC73XX_MAC_CFG_RX_EN, 0);
-
-		/* Discard packets */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-				    VSC73XX_ARBDISC, BIT(port), BIT(port));
-
-		/* Wait until queue is empty */
-		ret = read_poll_timeout(vsc73xx_read, err,
-					err < 0 || (val & BIT(port)),
-					VSC73XX_POLL_SLEEP_US,
-					VSC73XX_POLL_TIMEOUT_US, false,
-					vsc, VSC73XX_BLOCK_ARBITER, 0,
-					VSC73XX_ARBEMPTY, &val);
-		if (ret)
-			dev_err(vsc->dev,
-				"timeout waiting for block arbiter\n");
-		else if (err < 0)
-			dev_err(vsc->dev, "error reading arbiter\n");
-
-		/* Put this port into reset */
-		vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG,
-			      VSC73XX_MAC_CFG_RESET);
-
-		/* Accept packets again */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-				    VSC73XX_ARBDISC, BIT(port), 0);
-
-		/* Allow backward dropping of frames from this port */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
-				    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
-
-		/* Receive mask (disable forwarding) */
-		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
-				    VSC73XX_RECVMASK, BIT(port), 0);
+	vsc73xx_reset_port(vsc, port, 0);
 
-		return;
-	}
+	/* Allow backward dropping of frames from this port */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			    VSC73XX_SBACKWDROP, BIT(port), BIT(port));
 
-	/* Figure out what speed was negotiated */
-	if (phydev->speed == SPEED_1000) {
-		dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n",
-			port);
-
-		/* Set up default for internal port or external RGMII */
-		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
-			val = VSC73XX_MAC_CFG_1000M_F_RGMII;
-		else
-			val = VSC73XX_MAC_CFG_1000M_F_PHY;
-		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
-	} else if (phydev->speed == SPEED_100) {
-		if (phydev->duplex == DUPLEX_FULL) {
-			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 100 Mbit full duplex mode\n",
-				port);
-		} else {
-			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 100 Mbit half duplex mode\n",
-				port);
-		}
-		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
-	} else if (phydev->speed == SPEED_10) {
-		if (phydev->duplex == DUPLEX_FULL) {
-			val = VSC73XX_MAC_CFG_100_10M_F_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 10 Mbit full duplex mode\n",
-				port);
-		} else {
-			val = VSC73XX_MAC_CFG_100_10M_H_PHY;
-			dev_dbg(vsc->dev,
-				"port %d: 10 Mbit half duplex mode\n",
-				port);
-		}
-		vsc73xx_adjust_enable_port(vsc, port, phydev, val);
-	} else {
-		dev_err(vsc->dev,
-			"could not adjust link: unknown speed\n");
-	}
+	/* Receive mask (disable forwarding) */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+			    VSC73XX_RECVMASK, BIT(port), 0);
+}
+
+static void vsc73xx_mac_link_up(struct phylink_config *config,
+				struct phy_device *phy, unsigned int mode,
+				phy_interface_t interface, int speed,
+				int duplex, bool tx_pause, bool rx_pause)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct vsc73xx *vsc = dp->ds->priv;
+	int port = dp->index;
+	u32 val;
+	u8 seed;
+
+	if (speed == SPEED_1000)
+		val = VSC73XX_MAC_CFG_GIGA_MODE | VSC73XX_MAC_CFG_TX_IPG_1000M;
+	else
+		val = VSC73XX_MAC_CFG_TX_IPG_100_10M;
+
+	if (interface == PHY_INTERFACE_MODE_RGMII)
+		val |= VSC73XX_MAC_CFG_CLK_SEL_1000M;
+	else
+		val |= VSC73XX_MAC_CFG_CLK_SEL_EXT;
+
+	if (duplex == DUPLEX_FULL)
+		val |= VSC73XX_MAC_CFG_FDX;
+
+	/* This routine is described in the datasheet (below ARBDISC register
+	 * description)
+	 */
+	vsc73xx_reset_port(vsc, port, val);
+
+	/* Seed the port randomness with randomness */
+	get_random_bytes(&seed, 1);
+	val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET;
+	val |= VSC73XX_MAC_CFG_SEED_LOAD;
+	val |= VSC73XX_MAC_CFG_WEXC_DIS;
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val);
+
+	/* Flow control for the PHY facing ports:
+	 * Use a zero delay pause frame when pause condition is left
+	 * Obey pause control frames
+	 * When generating pause frames, use 0xff as pause value
+	 */
+	vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF,
+		      VSC73XX_FCCONF_ZERO_PAUSE_EN |
+		      VSC73XX_FCCONF_FLOW_CTRL_OBEY |
+		      0xff);
+
+	/* Accept packets again */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			    VSC73XX_ARBDISC, BIT(port), 0);
 
 	/* Enable port (forwarding) in the receieve mask */
 	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
 			    VSC73XX_RECVMASK, BIT(port), BIT(port));
+
+	/* Disallow backward dropping of frames from this port */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0,
+			    VSC73XX_SBACKWDROP, BIT(port), 0);
+
+	/* Enable TX, RX, deassert reset, stop loading seed */
+	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port,
+			    VSC73XX_MAC_CFG,
+			    VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD |
+			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN,
+			    VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN);
 }
 
 static int vsc73xx_port_enable(struct dsa_switch *ds, int port,
@@ -1055,12 +1039,17 @@ static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port,
 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000;
 }
 
+static const struct phylink_mac_ops vsc73xx_phylink_mac_ops = {
+	.mac_config = vsc73xx_mac_config,
+	.mac_link_down = vsc73xx_mac_link_down,
+	.mac_link_up = vsc73xx_mac_link_up,
+};
+
 static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_tag_protocol = vsc73xx_get_tag_protocol,
 	.setup = vsc73xx_setup,
 	.phy_read = vsc73xx_phy_read,
 	.phy_write = vsc73xx_phy_write,
-	.adjust_link = vsc73xx_adjust_link,
 	.get_strings = vsc73xx_get_strings,
 	.get_ethtool_stats = vsc73xx_get_ethtool_stats,
 	.get_sset_count = vsc73xx_get_sset_count,
@@ -1217,6 +1206,7 @@ int vsc73xx_probe(struct vsc73xx *vsc)
 	vsc->ds->priv = vsc;
 
 	vsc->ds->ops = &vsc73xx_ds_ops;
+	vsc->ds->phylink_mac_ops = &vsc73xx_phylink_mac_ops;
 	ret = dsa_register_switch(vsc->ds);
 	if (ret) {
 		dev_err(dev, "unable to register switch (%d)\n", ret);
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ