[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240418125336.7305d545@wsk>
Date: Thu, 18 Apr 2024 12:53:36 +0200
From: Lukasz Majewski <lukma@...x.de>
To: Paolo Abeni <pabeni@...hat.com>
Cc: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>, Eric Dumazet
<edumazet@...gle.com>, Vladimir Oltean <olteanv@...il.com>, "David S.
Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>, Oleksij
Rempel <o.rempel@...gutronix.de>, Tristram.Ha@...rochip.com, Sebastian
Andrzej Siewior <bigeasy@...utronix.de>, Ravi Gunasekaran
<r-gunasekaran@...com>, Simon Horman <horms@...nel.org>, Nikita
Zhandarovich <n.zhandarovich@...tech.ru>, Murali Karicheri
<m-karicheri2@...com>, Jiri Pirko <jiri@...nulli.us>, Dan Carpenter
<dan.carpenter@...aro.org>, Ziyang Xuan <william.xuanziyang@...wei.com>,
Shigeru Yoshida <syoshida@...hat.com>, "Ricardo B. Marliere"
<ricardo@...liere.net>, linux-kernel@...r.kernel.org
Subject: Re: [net-next PATCH v5 1/4] net: hsr: Provide RedBox support
(HSR-SAN)
Hi Paolo,
> On Mon, 2024-04-15 at 14:49 +0200, Lukasz Majewski wrote:
> > Introduce RedBox support (HSR-SAN to be more precise) for HSR
> > networks. Following traffic reduction optimizations have been
> > implemented:
> > - Do not send HSR supervisory frames to Port C (interlink)
> > - Do not forward to HSR ring frames addressed to Port C
> > - Do not forward to Port C frames from HSR ring
> > - Do not send duplicate HSR frame to HSR ring when destination is
> > Port C
> >
> > The corresponding patch to modify iptable2 sources has already been
> > sent:
> > https://lore.kernel.org/netdev/20240308145729.490863-1-lukma@denx.de/T/
> >
> > Testing procedure:
> > ------------------
> > The EVB-KSZ9477 has been used for testing on net-next branch
> > (SHA1: 5fc68320c1fb3c7d456ddcae0b4757326a043e6f).
> >
> > Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for
> > ports 1/2 (with HW offloading for ksz9477) was created. Port 3 has
> > been used as interlink port (single USB-ETH dongle).
> >
> > Configuration - RedBox (EVB-KSZ9477):
> > if link set lan1 down;ip link set lan2 down
> > ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision
> > 45 version 1 ip link add name hsr1 type hsr slave1 lan4 slave2 lan5
> > interlink lan3 supervision 45 version 1 ip link set lan4 up;ip link
> > set lan5 up ip link set lan3 up
> > ip addr add 192.168.0.11/24 dev hsr1
> > ip link set hsr1 up
> >
> > Configuration - DAN-H (EVB-KSZ9477):
> >
> > ip link set lan1 down;ip link set lan2 down
> > ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision
> > 45 version 1 ip link add name hsr1 type hsr slave1 lan4 slave2 lan5
> > supervision 45 version 1 ip link set lan4 up;ip link set lan5 up
> > ip addr add 192.168.0.12/24 dev hsr1
> > ip link set hsr1 up
> >
> > This approach uses only SW based HSR devices (hsr1).
> >
> > -------------- ----------------- ------------
> > DAN-H Port5 | <------> | Port5 | |
> > Port4 | <------> | Port4 Port3 | <---> | PC
> > | | (RedBox) | | (USB-ETH)
> > EVB-KSZ9477 | | EVB-KSZ9477 | |
> > -------------- ----------------- ------------
>
> The above description is obsoleted by follow-up tests, right?
>
No, it is still valid if one would like to use/test this code on two
KSZ9477-EVB boards.
However, I can add also information referring to hsr_redbox.sh tests as
well.
> Thanks,
>
> Paolo
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@...x.de
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists