[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240419-for-netnext-mt7530-improvements-4-v1-9-6d852ca79b1d@arinc9.com>
Date: Fri, 19 Apr 2024 13:09:32 +0300
From: Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@...nel.org>
To: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>
Cc: Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
mithat.guner@...ont.com, erkin.bozoglu@...ont.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH net-next 09/13] net: dsa: mt7530: define MAC speed
capabilities per switch model
From: Arınç ÜNAL <arinc.unal@...nc9.com>
With the support of the MT7988 SoC switch, the MAC speed capabilities
defined on mt753x_phylink_get_caps() won't apply to all switch models
anymore. Move them to more appropriate locations instead of overwriting
config->mac_capabilities.
Remove the comment on mt753x_phylink_get_caps() as it's become invalid with
the support of MT7531 and MT7988 SoC switch.
Add break to case 6 of mt7988_mac_port_get_caps() to be explicit.
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
drivers/net/dsa/mt7530.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 4e9aa78ca3d0..8a141f849673 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2685,6 +2685,8 @@ mt7531_setup(struct dsa_switch *ds)
static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+
switch (port) {
/* Ports which are connected to switch PHYs. There is no MII pinout. */
case 0 ... 4:
@@ -2716,6 +2718,8 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
{
struct mt7530_priv *priv = ds->priv;
+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+
switch (port) {
/* Ports which are connected to switch PHYs. There is no MII pinout. */
case 0 ... 4:
@@ -2755,14 +2759,17 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
case 0 ... 3:
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
+
+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
break;
/* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
case 6:
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- MAC_10000FD;
+
+ config->mac_capabilities |= MAC_10000FD;
+ break;
}
}
@@ -2932,9 +2939,7 @@ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
{
struct mt7530_priv *priv = ds->priv;
- /* This switch only supports full-duplex at 1Gbps */
- config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- MAC_10 | MAC_100 | MAC_1000FD;
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
priv->info->mac_port_get_caps(ds, port, config);
}
--
2.40.1
Powered by blists - more mailing lists