Message-ID: <20240424133542.113933-24-karol.kolacinski@intel.com>
Date: Wed, 24 Apr 2024 15:30:17 +0200
From: Karol Kolacinski <karol.kolacinski@...el.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: netdev@...r.kernel.org,
	anthony.l.nguyen@...el.com,
	jesse.brandeburg@...el.com,
	Michal Michalik <michal.michalik@...el.com>,
	Przemek Kitszel <przemyslaw.kitszel@...el.com>,
	Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>,
	Karol Kolacinski <karol.kolacinski@...el.com>
Subject: [PATCH v10 iwl-next 09/12] ice: Add support for E825-C TS PLL handling

From: Michal Michalik <michal.michalik@...el.com>

The CGU layout of E825-C is a little different than E822/E823. Add
support the new hardware adding relevant functions.

Signed-off-by: Michal Michalik <michal.michalik@...el.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@...el.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@...el.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@...el.com>
---
V9 -> V10: changed 1588 clk_src and clk_freq caps to fixed ones for E825C
V4 -> V5: added UL to some of tspll_fbdiv_frac values in e825c_cgu_params

 drivers/net/ethernet/intel/ice/ice_cgu_regs.h |  65 +++++
 drivers/net/ethernet/intel/ice/ice_common.c   |   9 +-
 .../net/ethernet/intel/ice/ice_ptp_consts.h   |  87 ++++++
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c   | 261 +++++++++++++++++-
 drivers/net/ethernet/intel/ice/ice_ptp_hw.h   |  24 +-
 drivers/net/ethernet/intel/ice/ice_type.h     |   2 +-
 6 files changed, 429 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_cgu_regs.h b/drivers/net/ethernet/intel/ice/ice_cgu_regs.h
index 36aeb10eefb7..10d9d74f3545 100644
--- a/drivers/net/ethernet/intel/ice/ice_cgu_regs.h
+++ b/drivers/net/ethernet/intel/ice/ice_cgu_regs.h
@@ -27,6 +27,17 @@ union nac_cgu_dword9 {
 	u32 val;
 };
 
+#define NAC_CGU_DWORD16_E825C 0x40
+union nac_cgu_dword16_e825c {
+	struct {
+		u32 synce_remndr : 6;
+		u32 synce_phlmt_en : 1;
+		u32 misc13 : 17;
+		u32 tspll_ck_refclkfreq : 8;
+	};
+	u32 val;
+};
+
 #define NAC_CGU_DWORD19 0x4c
 union nac_cgu_dword19 {
 	struct {
@@ -67,6 +78,22 @@ union nac_cgu_dword22 {
 	u32 val;
 };
 
+#define NAC_CGU_DWORD23_E825C 0x5C
+union nac_cgu_dword23_e825c {
+	struct {
+		u32 cgupll_fbdiv_intgr : 10;
+		u32 ux56pll_fbdiv_intgr : 10;
+		u32 misc20 : 4;
+		u32 ts_pll_enable : 1;
+		u32 time_sync_tspll_align_sel : 1;
+		u32 ext_synce_sel : 1;
+		u32 ref1588_ck_div : 4;
+		u32 time_ref_sel : 1;
+
+	};
+	u32 val;
+};
+
 #define NAC_CGU_DWORD24 0x60
 union nac_cgu_dword24 {
 	struct {
@@ -113,4 +140,42 @@ union tspll_ro_bwm_lf {
 	u32 val;
 };
 
+#define TSPLL_RO_LOCK_E825C 0x3f0
+union tspll_ro_lock_e825c {
+	struct {
+		u32 bw_freqov_high_cri_7_0 : 8;
+		u32 bw_freqov_high_cri_9_8 : 2;
+		u32 reserved455 : 1;
+		u32 plllock_gain_tran_cri : 1;
+		u32 plllock_true_lock_cri : 1;
+		u32 pllunlock_flag_cri : 1;
+		u32 afcerr_cri : 1;
+		u32 afcdone_cri : 1;
+		u32 feedfwrdgain_cal_cri_7_0 : 8;
+		u32 reserved462 : 8;
+	};
+	u32 val;
+};
+
+#define TSPLL_BW_TDC_E825C 0x31c
+union tspll_bw_tdc_e825c {
+	struct {
+		u32 i_tdc_offset_lock_1_0 : 2;
+		u32 i_bbthresh1_2_0 : 3;
+		u32 i_bbthresh2_2_0 : 3;
+		u32 i_tdcsel_1_0 : 2;
+		u32 i_tdcovccorr_en_h : 1;
+		u32 i_divretimeren : 1;
+		u32 i_bw_ampmeas_window : 1;
+		u32 i_bw_lowerbound_2_0 : 3;
+		u32 i_bw_upperbound_2_0 : 3;
+		u32 i_bw_mode_1_0 : 2;
+		u32 i_ft_mode_sel_2_0 : 3;
+		u32 i_bwphase_4_0 : 5;
+		u32 i_plllock_sel_1_0 : 2;
+		u32 i_afc_divratio : 1;
+	};
+	u32 val;
+};
+
 #endif /* _ICE_CGU_REGS_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index c5473d05698e..b225f4a8bc21 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -2309,8 +2309,13 @@ ice_parse_1588_func_caps(struct ice_hw *hw, struct ice_hw_func_caps *func_p,
 	info->tmr_index_owned = ((number & ICE_TS_TMR_IDX_OWND_M) != 0);
 	info->tmr_index_assoc = ((number & ICE_TS_TMR_IDX_ASSOC_M) != 0);
 
-	info->clk_freq = FIELD_GET(ICE_TS_CLK_FREQ_M, number);
-	info->clk_src = ((number & ICE_TS_CLK_SRC_M) != 0);
+	if (!ice_is_e825c(hw)) {
+		info->clk_freq = FIELD_GET(ICE_TS_CLK_FREQ_M, number);
+		info->clk_src = ((number & ICE_TS_CLK_SRC_M) != 0);
+	} else {
+		info->clk_freq = ICE_TIME_REF_FREQ_156_250;
+		info->clk_src = ICE_CLK_SRC_TCXO;
+	}
 
 	if (info->clk_freq < NUM_ICE_TIME_REF_FREQ) {
 		info->time_ref = (enum ice_time_ref_freq)info->clk_freq;
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
index ef180936f60c..e6980b94a6c1 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
@@ -470,6 +470,93 @@ const struct ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ] = {
 	},
 };
 
+const
+struct ice_cgu_pll_params_e825c e825c_cgu_params[NUM_ICE_TIME_REF_FREQ] = {
+	/* ICE_TIME_REF_FREQ_25_000 -> 25 MHz */
+	{
+		/* tspll_ck_refclkfreq */
+		0x19,
+		/* tspll_ndivratio */
+		1,
+		/* tspll_fbdiv_intgr */
+		320,
+		/* tspll_fbdiv_frac */
+		0,
+		/* ref1588_ck_div */
+		0,
+	},
+
+	/* ICE_TIME_REF_FREQ_122_880 -> 122.88 MHz */
+	{
+		/* tspll_ck_refclkfreq */
+		0x29,
+		/* tspll_ndivratio */
+		3,
+		/* tspll_fbdiv_intgr */
+		195,
+		/* tspll_fbdiv_frac */
+		1342177280UL,
+		/* ref1588_ck_div */
+		0,
+	},
+
+	/* ICE_TIME_REF_FREQ_125_000 -> 125 MHz */
+	{
+		/* tspll_ck_refclkfreq */
+		0x3E,
+		/* tspll_ndivratio */
+		2,
+		/* tspll_fbdiv_intgr */
+		128,
+		/* tspll_fbdiv_frac */
+		0,
+		/* ref1588_ck_div */
+		0,
+	},
+
+	/* ICE_TIME_REF_FREQ_153_600 -> 153.6 MHz */
+	{
+		/* tspll_ck_refclkfreq */
+		0x33,
+		/* tspll_ndivratio */
+		3,
+		/* tspll_fbdiv_intgr */
+		156,
+		/* tspll_fbdiv_frac */
+		1073741824UL,
+		/* ref1588_ck_div */
+		0,
+	},
+
+	/* ICE_TIME_REF_FREQ_156_250 -> 156.25 MHz */
+	{
+		/* tspll_ck_refclkfreq */
+		0x1F,
+		/* tspll_ndivratio */
+		5,
+		/* tspll_fbdiv_intgr */
+		256,
+		/* tspll_fbdiv_frac */
+		0,
+		/* ref1588_ck_div */
+		0,
+	},
+
+	/* ICE_TIME_REF_FREQ_245_760 -> 245.76 MHz */
+	{
+		/* tspll_ck_refclkfreq */
+		0x52,
+		/* tspll_ndivratio */
+		3,
+		/* tspll_fbdiv_intgr */
+		97,
+		/* tspll_fbdiv_frac */
+		2818572288UL,
+		/* ref1588_ck_div */
+		0,
+	},
+};
+
 /* struct ice_vernier_info_e82x
  *
  * E822 hardware calibrates the delay of the timestamp indication from the
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index b57f82d92e40..be14f818122e 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -325,8 +325,8 @@ static const char *ice_clk_freq_str(enum ice_time_ref_freq clk_freq)
 static const char *ice_clk_src_str(enum ice_clk_src clk_src)
 {
 	switch (clk_src) {
-	case ICE_CLK_SRC_TCX0:
-		return "TCX0";
+	case ICE_CLK_SRC_TCXO:
+		return "TCXO";
 	case ICE_CLK_SRC_TIME_REF:
 		return "TIME_REF";
 	default:
@@ -338,7 +338,7 @@ static const char *ice_clk_src_str(enum ice_clk_src clk_src)
  * ice_cfg_cgu_pll_e82x - Configure the Clock Generation Unit
  * @hw: pointer to the HW struct
  * @clk_freq: Clock frequency to program
- * @clk_src: Clock source to select (TIME_REF, or TCX0)
+ * @clk_src: Clock source to select (TIME_REF, or TCXO)
  *
  * Configure the Clock Generation Unit with the desired clock frequency and
  * time reference, enabling the PLL which drives the PTP hardware clock.
@@ -372,10 +372,10 @@ static int ice_cfg_cgu_pll_e82x(struct ice_hw *hw,
 		return -EINVAL;
 	}
 
-	if (clk_src == ICE_CLK_SRC_TCX0 &&
+	if (clk_src == ICE_CLK_SRC_TCXO &&
 	    clk_freq != ICE_TIME_REF_FREQ_25_000) {
 		dev_warn(ice_hw_to_dev(hw),
-			 "TCX0 only supports 25 MHz frequency\n");
+			 "TCXO only supports 25 MHz frequency\n");
 		return -EINVAL;
 	}
 
@@ -480,16 +480,198 @@ static int ice_cfg_cgu_pll_e82x(struct ice_hw *hw,
 }
 
 /**
- * ice_init_cgu_e82x - Initialize CGU with settings from firmware
- * @hw: pointer to the HW structure
+ * ice_cfg_cgu_pll_e825c - Configure the Clock Generation Unit for E825-C
+ * @hw: pointer to the HW struct
+ * @clk_freq: Clock frequency to program
+ * @clk_src: Clock source to select (TIME_REF, or TCXO)
  *
- * Initialize the Clock Generation Unit of the E822 device.
+ * Configure the Clock Generation Unit with the desired clock frequency and
+ * time reference, enabling the PLL which drives the PTP hardware clock.
  *
- * Return: 0 on success, other error codes when failed to read/write/cfg CGU
+ * Return:
+ * * %0       - success
+ * * %-EINVAL - input parameters are incorrect
+ * * %-EBUSY  - failed to lock TS PLL
+ * * %other   - CGU read/write failure
  */
-static int ice_init_cgu_e82x(struct ice_hw *hw)
+static int ice_cfg_cgu_pll_e825c(struct ice_hw *hw,
+				 enum ice_time_ref_freq clk_freq,
+				 enum ice_clk_src clk_src)
+{
+	union tspll_ro_lock_e825c ro_lock;
+	union nac_cgu_dword16_e825c dw16;
+	union nac_cgu_dword23_e825c dw23;
+	union nac_cgu_dword19 dw19;
+	union nac_cgu_dword22 dw22;
+	union nac_cgu_dword24 dw24;
+	union nac_cgu_dword9 dw9;
+	int err;
+
+	if (clk_freq >= NUM_ICE_TIME_REF_FREQ) {
+		dev_warn(ice_hw_to_dev(hw), "Invalid TIME_REF frequency %u\n",
+			 clk_freq);
+		return -EINVAL;
+	}
+
+	if (clk_src >= NUM_ICE_CLK_SRC) {
+		dev_warn(ice_hw_to_dev(hw), "Invalid clock source %u\n",
+			 clk_src);
+		return -EINVAL;
+	}
+
+	if (clk_src == ICE_CLK_SRC_TCXO &&
+	    clk_freq != ICE_TIME_REF_FREQ_156_250) {
+		dev_warn(ice_hw_to_dev(hw),
+			 "TCXO only supports 156.25 MHz frequency\n");
+		return -EINVAL;
+	}
+
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD9, &dw9.val);
+	if (err)
+		return err;
+
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD24, &dw24.val);
+	if (err)
+		return err;
+
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD16_E825C, &dw16.val);
+	if (err)
+		return err;
+
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, &dw23.val);
+	if (err)
+		return err;
+
+	err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_LOCK_E825C, &ro_lock.val);
+	if (err)
+		return err;
+
+	/* Log the current clock configuration */
+	ice_debug(hw, ICE_DBG_PTP, "Current CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+		  dw24.ts_pll_enable ? "enabled" : "disabled",
+		  ice_clk_src_str(dw23.time_ref_sel),
+		  ice_clk_freq_str(dw9.time_ref_freq_sel),
+		  ro_lock.plllock_true_lock_cri ? "locked" : "unlocked");
+
+	/* Disable the PLL before changing the clock source or frequency */
+	if (dw23.ts_pll_enable) {
+		dw23.ts_pll_enable = 0;
+
+		err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C,
+					     dw23.val);
+		if (err)
+			return err;
+	}
+
+	/* Set the frequency */
+	dw9.time_ref_freq_sel = clk_freq;
+
+	/* Enable the correct receiver */
+	if (clk_src == ICE_CLK_SRC_TCXO) {
+		dw9.time_ref_en = 0;
+		dw9.clk_eref0_en = 1;
+	} else {
+		dw9.time_ref_en = 1;
+		dw9.clk_eref0_en = 0;
+	}
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD9, dw9.val);
+	if (err)
+		return err;
+
+	/* Choose the referenced frequency */
+	dw16.tspll_ck_refclkfreq =
+	e825c_cgu_params[clk_freq].tspll_ck_refclkfreq;
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD16_E825C, dw16.val);
+	if (err)
+		return err;
+
+	/* Configure the TS PLL feedback divisor */
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD19, &dw19.val);
+	if (err)
+		return err;
+
+	dw19.tspll_fbdiv_intgr =
+		e825c_cgu_params[clk_freq].tspll_fbdiv_intgr;
+	dw19.tspll_ndivratio =
+		e825c_cgu_params[clk_freq].tspll_ndivratio;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD19, dw19.val);
+	if (err)
+		return err;
+
+	/* Configure the TS PLL post divisor */
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD22, &dw22.val);
+	if (err)
+		return err;
+
+	/* These two are constant for E825C */
+	dw22.time1588clk_div = 5;
+	dw22.time1588clk_sel_div2 = 0;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD22, dw22.val);
+	if (err)
+		return err;
+
+	/* Configure the TS PLL pre divisor and clock source */
+	err = ice_read_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, &dw23.val);
+	if (err)
+		return err;
+
+	dw23.ref1588_ck_div =
+		e825c_cgu_params[clk_freq].ref1588_ck_div;
+	dw23.time_ref_sel = clk_src;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, dw23.val);
+	if (err)
+		return err;
+
+	dw24.tspll_fbdiv_frac =
+		e825c_cgu_params[clk_freq].tspll_fbdiv_frac;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD24, dw24.val);
+	if (err)
+		return err;
+
+	/* Finally, enable the PLL */
+	dw23.ts_pll_enable = 1;
+
+	err = ice_write_cgu_reg_e82x(hw, NAC_CGU_DWORD23_E825C, dw23.val);
+	if (err)
+		return err;
+
+	/* Wait to verify if the PLL locks */
+	usleep_range(1000, 5000);
+
+	err = ice_read_cgu_reg_e82x(hw, TSPLL_RO_LOCK_E825C, &ro_lock.val);
+	if (err)
+		return err;
+
+	if (!ro_lock.plllock_true_lock_cri) {
+		dev_warn(ice_hw_to_dev(hw), "CGU PLL failed to lock\n");
+		return -EBUSY;
+	}
+
+	/* Log the current clock configuration */
+	ice_debug(hw, ICE_DBG_PTP, "New CGU configuration -- %s, clk_src %s, clk_freq %s, PLL %s\n",
+		  dw24.ts_pll_enable ? "enabled" : "disabled",
+		  ice_clk_src_str(dw23.time_ref_sel),
+		  ice_clk_freq_str(dw9.time_ref_freq_sel),
+		  ro_lock.plllock_true_lock_cri ? "locked" : "unlocked");
+
+	return 0;
+}
+
+/**
+ * ice_cfg_cgu_pll_dis_sticky_bits_e82x - disable TS PLL sticky bits
+ * @hw: pointer to the HW struct
+ *
+ * Configure the Clock Generation Unit TS PLL sticky bits so they don't latch on
+ * losing TS PLL lock, but always show current state.
+ *
+ * Return: 0 on success, other error codes when failed to read/write CGU
+ */
+static int ice_cfg_cgu_pll_dis_sticky_bits_e82x(struct ice_hw *hw)
 {
-	struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
 	union tspll_cntr_bist_settings cntr_bist;
 	int err;
 
@@ -502,16 +684,65 @@ static int ice_init_cgu_e82x(struct ice_hw *hw)
 	cntr_bist.i_plllock_sel_0 = 0;
 	cntr_bist.i_plllock_sel_1 = 0;
 
-	err = ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
-				     cntr_bist.val);
+	return ice_write_cgu_reg_e82x(hw, TSPLL_CNTR_BIST_SETTINGS,
+				      cntr_bist.val);
+}
+
+/**
+ * ice_cfg_cgu_pll_dis_sticky_bits_e825c - disable TS PLL sticky bits for E825-C
+ * @hw: pointer to the HW struct
+ *
+ * Configure the Clock Generation Unit TS PLL sticky bits so they don't latch on
+ * losing TS PLL lock, but always show current state.
+ *
+ * Return: 0 on success, other error codes when failed to read/write CGU
+ */
+static int ice_cfg_cgu_pll_dis_sticky_bits_e825c(struct ice_hw *hw)
+{
+	union tspll_bw_tdc_e825c bw_tdc;
+	int err;
+
+	err = ice_read_cgu_reg_e82x(hw, TSPLL_BW_TDC_E825C, &bw_tdc.val);
+	if (err)
+		return err;
+
+	bw_tdc.i_plllock_sel_1_0 = 0;
+
+	return ice_write_cgu_reg_e82x(hw, TSPLL_BW_TDC_E825C, bw_tdc.val);
+}
+
+/**
+ * ice_init_cgu_e82x - Initialize CGU with settings from firmware
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the Clock Generation Unit of the E822 device.
+ *
+ * Return: 0 on success, other error codes when failed to read/write/cfg CGU
+ */
+static int ice_init_cgu_e82x(struct ice_hw *hw)
+{
+	struct ice_ts_func_info *ts_info = &hw->func_caps.ts_func_info;
+	int err;
+
+	/* Disable sticky lock detection so lock err reported is accurate */
+	if (ice_is_e825c(hw))
+		err = ice_cfg_cgu_pll_dis_sticky_bits_e825c(hw);
+	else
+		err = ice_cfg_cgu_pll_dis_sticky_bits_e82x(hw);
 	if (err)
 		return err;
 
 	/* Configure the CGU PLL using the parameters from the function
 	 * capabilities.
 	 */
-	return ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
-				   (enum ice_clk_src)ts_info->clk_src);
+	if (ice_is_e825c(hw))
+		err = ice_cfg_cgu_pll_e825c(hw, ts_info->time_ref,
+					    (enum ice_clk_src)ts_info->clk_src);
+	else
+		err = ice_cfg_cgu_pll_e82x(hw, ts_info->time_ref,
+					   (enum ice_clk_src)ts_info->clk_src);
+
+	return err;
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
index 184573509e62..0852a34ade91 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
@@ -197,7 +197,7 @@ extern
 const struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD];
 
 /**
- * struct ice_cgu_pll_params_e82x
+ * struct ice_cgu_pll_params_e82x - E82X CGU parameters
  * @refclk_pre_div: Reference clock pre-divisor
  * @feedback_div: Feedback divisor
  * @frac_n_div: Fractional divisor
@@ -287,6 +287,28 @@ struct ice_cgu_pin_desc {
 extern const struct
 ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ];
 
+/**
+ * struct ice_cgu_pll_params_e825c - E825C CGU parameters
+ * @tspll_ck_refclkfreq: tspll_ck_refclkfreq selection
+ * @tspll_ndivratio: ndiv ratio that goes directly to the pll
+ * @tspll_fbdiv_intgr: TS PLL integer feedback divide
+ * @tspll_fbdiv_frac:  TS PLL fractional feedback divide
+ * @ref1588_ck_div: clock divider for tspll ref
+ *
+ * Clock Generation Unit parameters used to program the PLL based on the
+ * selected TIME_REF/TCXO frequency.
+ */
+struct ice_cgu_pll_params_e825c {
+	u32 tspll_ck_refclkfreq;
+	u32 tspll_ndivratio;
+	u32 tspll_fbdiv_intgr;
+	u32 tspll_fbdiv_frac;
+	u32 ref1588_ck_div;
+};
+
+extern const struct
+ice_cgu_pll_params_e825c e825c_cgu_params[NUM_ICE_TIME_REF_FREQ];
+
 #define E810C_QSFP_C827_0_HANDLE 2
 #define E810C_QSFP_C827_1_HANDLE 3
 
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index e09a0b8c5112..62ff21b3ee22 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -328,7 +328,7 @@ enum ice_time_ref_freq {
 
 /* Clock source specification */
 enum ice_clk_src {
-	ICE_CLK_SRC_TCX0	= 0, /* Temperature compensated oscillator  */
+	ICE_CLK_SRC_TCXO	= 0, /* Temperature compensated oscillator */
 	ICE_CLK_SRC_TIME_REF	= 1, /* Use TIME_REF reference clock */
 
 	NUM_ICE_CLK_SRC
-- 
2.43.0

Powered by blists - more mailing lists