lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <14c200b4573b4a60af14b37861ca1727@realtek.com>
Date: Mon, 6 May 2024 11:32:38 +0000
From: Justin Lai <justinlai0215@...ltek.com>
To: Simon Horman <horms@...nel.org>
CC: "kuba@...nel.org" <kuba@...nel.org>,
        "davem@...emloft.net"
	<davem@...emloft.net>,
        "edumazet@...gle.com" <edumazet@...gle.com>,
        "pabeni@...hat.com" <pabeni@...hat.com>,
        "linux-kernel@...r.kernel.org"
	<linux-kernel@...r.kernel.org>,
        "netdev@...r.kernel.org"
	<netdev@...r.kernel.org>,
        "andrew@...n.ch" <andrew@...n.ch>,
        "jiri@...nulli.us" <jiri@...nulli.us>,
        Ping-Ke Shih <pkshih@...ltek.com>, Larry Chiu <larry.chiu@...ltek.com>
Subject: RE: [PATCH net-next v17 01/13] rtase: Add pci table supported in this module

> 
> 
> On Thu, May 02, 2024 at 05:18:35PM +0800, Justin Lai wrote:
> > Add pci table supported in this module, and implement pci_driver
> > function to initialize this driver, remove this driver, or shutdown this driver.
> >
> > Signed-off-by: Justin Lai <justinlai0215@...ltek.com>
> 
> ...
> 
> > diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > new file mode 100644
> > index 000000000000..5ddb5f7abfe9
> > --- /dev/null
> > +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > @@ -0,0 +1,618 @@
> > +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> > +/*
> > + *  rtase is the Linux device driver released for Realtek Automotive
> > +Switch
> > + *  controllers with PCI-Express interface.
> > + *
> > + *  Copyright(c) 2023 Realtek Semiconductor Corp.
> > + *
> > + *  Below is a simplified block diagram of the chip and its relevant
> interfaces.
> > + *
> > + *               *************************
> > + *               *                       *
> > + *               *  CPU network device   *
> > + *               *                       *
> > + *               *   +-------------+     *
> > + *               *   |  PCIE Host  |     *
> > + *               ***********++************
> > + *                          ||
> > + *                         PCIE
> > + *                          ||
> > + *      ********************++**********************
> > + *      *            | PCIE Endpoint |             *
> > + *      *            +---------------+             *
> > + *      *                | GMAC |                  *
> > + *      *                +--++--+  Realtek         *
> > + *      *                   ||     RTL90xx Series  *
> > + *      *                   ||                     *
> > + *      *     +-------------++----------------+    *
> > + *      *     |           | MAC |             |    *
> > + *      *     |           +-----+             |    *
> > + *      *     |                               |    *
> > + *      *     |     Ethernet Switch Core      |    *
> > + *      *     |                               |    *
> > + *      *     |   +-----+           +-----+   |    *
> > + *      *     |   | MAC |...........| MAC |   |    *
> > + *      *     +---+-----+-----------+-----+---+    *
> > + *      *         | PHY |...........| PHY |        *
> > + *      *         +--++-+           +--++-+        *
> > + *      *************||****************||***********
> 
> Thanks for the diagram, I like it a lot :)
> 

Thank you for your like :)
> > + *
> > + *  The block of the Realtek RTL90xx series is our entire chip
> > + architecture,
> > + *  the GMAC is connected to the switch core, and there is no PHY in
> between.
> > + *  In addition, this driver is mainly used to control GMAC, but does
> > + not
> > + *  control the switch core, so it is not the same as DSA.
> > + */
> 
> ...
> 
> > +static int rtase_alloc_msix(struct pci_dev *pdev, struct
> > +rtase_private *tp) {
> > +     int ret;
> > +     u16 i;
> > +
> > +     memset(tp->msix_entry, 0x0, RTASE_NUM_MSIX * sizeof(struct
> > + msix_entry));
> > +
> > +     for (i = 0; i < RTASE_NUM_MSIX; i++)
> > +             tp->msix_entry[i].entry = i;
> > +
> > +     ret = pci_enable_msix_exact(pdev, tp->msix_entry, tp->int_nums);
> > +     if (!ret) {
> 
> In Linux Networking code it is an idiomatic practice to keep handle errors in
> branches and use the main path of execution for the non error path.
> 
> In this case I think that would look a bit like this:
> 
>         ret = pci_enable_msix_exact(pdev, tp->msix_entry, tp->int_nums);
>         if (ret)
>                 return ret;
> 
>         ...
> 
>         return 0;
> 
> > +
> > +             for (i = 0; i < tp->int_nums; i++)
> > +                     tp->int_vector[i].irq = pci_irq_vector(pdev, i);
> 
> pci_irq_vector() can fail, should that be handled here?

Thank you for your feedback, I will confirm this part again.
> 
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +static int rtase_alloc_interrupt(struct pci_dev *pdev,
> > +                              struct rtase_private *tp) {
> > +     int ret;
> > +
> > +     ret = rtase_alloc_msix(pdev, tp);
> > +     if (ret) {
> > +             ret = pci_enable_msi(pdev);
> > +             if (ret)
> > +                     dev_err(&pdev->dev,
> > +                             "unable to alloc interrupt.(MSI)\n");
> 
> If an error occurs then it is a good practice to unwind resource allocations
> made within the context of this function call, as this leads to more symmetric
> unwind paths in callers.
> 
> In this case I think any resources consumed by rtase_alloc_msix() should be
> released if pci_enable_msi fails. Probably using a goto label is appropriate
> here.
> 
> Likewise, I suggest that similar logic applies to errors within
> rtase_alloc_msix().
> 

Since msi will be enabled only when msix enable fails, when pci_enable_msi fails,
there will be no problem of msix-related resources needing to be released,
because the msix interrupt has not been successfully allocated.
> > +             else
> > +                     tp->sw_flag |= RTASE_SWF_MSI_ENABLED;
> > +     } else {
> > +             tp->sw_flag |= RTASE_SWF_MSIX_ENABLED;
> > +     }
> > +
> > +     return ret;
> > +}
> 
> ...

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ