lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5t4o3ayne7g46rt23lmiz3ksw7zfztbh6tzghojblaicw2zsbu@pv575lrpoltu>
Date: Thu, 9 May 2024 09:02:29 -0500
From: Andrew Halaney <ahalaney@...hat.com>
To: Xiaolei Wang <xiaolei.wang@...driver.com>
Cc: alexandre.torgue@...s.st.com, joabreu@...opsys.com, 
	davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com, 
	mcoquelin.stm32@...il.com, richardcochran@...il.com, bartosz.golaszewski@...aro.org, 
	horms@...nel.org, rohan.g.thomas@...el.com, rmk+kernel@...linux.org.uk, 
	fancer.lancer@...il.com, netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com, 
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [net PATCH v4] net: stmmac: move the EST and EST lock to struct
 stmmac_priv

Hey Xialei Wang,

Some nitpicky comments below :)

On Thu, May 09, 2024 at 08:37:18PM GMT, Xiaolei Wang wrote:
> Reinitialize the whole EST structure would also reset the mutex lock
> which is embedded in the EST structure, and then trigger the following
> warning. To address this, move the lock to struct stmmac_priv,
> and move EST to struct stmmac_priv, because the EST configs don't look
> as the platform config, but EST is enabled in runtime with the settings

s/as/at/

> retrieved for the TC TAPRIO feature also in runtime. So it's better to
> have the EST-data preserved in the driver private date instead of the

s/date/data/

> platform data storage. We also need to require the mutex lock when doing

s/require/reacquire/

So in this patch you are:

1. Pulling the mutex protecting the EST structure out to avoid
   clearing it during reinit/memset of the EST structure
2. Moving the EST structure to a more logical location

In my opinion this would make sense in two patches, and the former patch
would have a:

    Fixes: b2aae654a479 ("net: stmmac: add mutex lock to protect est parameters")

above your Signed-off-by:. Please at least consider adding the Fixes tag!

Otherwise, this change seems good to me.

Thanks,
Andrew

> this initialization.
> 
> DEBUG_LOCKS_WARN_ON(lock->magic != lock)
> WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068
>  Modules linked in:
>  CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29
>  Hardware name: NXP i.MX8MPlus EVK board (DT)
>  pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>  pc : __mutex_lock+0xd84/0x1068
>  lr : __mutex_lock+0xd84/0x1068
>  sp : ffffffc0864e3570
>  x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003
>  x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac
>  x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000
>  x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff
>  x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000
>  x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8
>  x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698
>  x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001
>  x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027
>  x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000
>  Call trace:
>   __mutex_lock+0xd84/0x1068
>   mutex_lock_nested+0x28/0x34
>   tc_setup_taprio+0x118/0x68c
>   stmmac_setup_tc+0x50/0xf0
>   taprio_change+0x868/0xc9c
> 
> Signed-off-by: Xiaolei Wang <xiaolei.wang@...driver.com>
> ---
> v1 -> v2:
>  - move the lock to struct plat_stmmacenet_data
> v2 -> v3:
>  - Add require the mutex lock for reinitialization
> v3 -> v4
>  - Move est and est lock to stmmac_priv as suggested by Serge
> 
>  drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  3 +
>  .../net/ethernet/stmicro/stmmac/stmmac_main.c | 18 +++---
>  .../net/ethernet/stmicro/stmmac/stmmac_ptp.c  | 30 +++++-----
>  .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 58 +++++++++----------
>  include/linux/stmmac.h                        |  2 -
>  5 files changed, 56 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index dddcaa9220cc..e05a775b463e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -261,6 +261,9 @@ struct stmmac_priv {
>  	struct stmmac_extra_stats xstats ____cacheline_aligned_in_smp;
>  	struct stmmac_safety_stats sstats;
>  	struct plat_stmmacenet_data *plat;
> +	/* Protect est parameters */
> +	struct mutex est_lock;
> +	struct stmmac_est *est;
>  	struct dma_features dma_cap;
>  	struct stmmac_counters mmc;
>  	int hw_cap_support;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 7c6fb14b5555..0eafd609bf53 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -2491,9 +2491,9 @@ static bool stmmac_xdp_xmit_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
>  		if (!xsk_tx_peek_desc(pool, &xdp_desc))
>  			break;
>  
> -		if (priv->plat->est && priv->plat->est->enable &&
> -		    priv->plat->est->max_sdu[queue] &&
> -		    xdp_desc.len > priv->plat->est->max_sdu[queue]) {
> +		if (priv->est && priv->est->enable &&
> +		    priv->est->max_sdu[queue] &&
> +		    xdp_desc.len > priv->est->max_sdu[queue]) {
>  			priv->xstats.max_sdu_txq_drop[queue]++;
>  			continue;
>  		}
> @@ -4528,9 +4528,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
>  			return stmmac_tso_xmit(skb, dev);
>  	}
>  
> -	if (priv->plat->est && priv->plat->est->enable &&
> -	    priv->plat->est->max_sdu[queue] &&
> -	    skb->len > priv->plat->est->max_sdu[queue]){
> +	if (priv->est && priv->est->enable &&
> +	    priv->est->max_sdu[queue] &&
> +	    skb->len > priv->est->max_sdu[queue]){
>  		priv->xstats.max_sdu_txq_drop[queue]++;
>  		goto max_sdu_err;
>  	}
> @@ -4909,9 +4909,9 @@ static int stmmac_xdp_xmit_xdpf(struct stmmac_priv *priv, int queue,
>  	if (stmmac_tx_avail(priv, queue) < STMMAC_TX_THRESH(priv))
>  		return STMMAC_XDP_CONSUMED;
>  
> -	if (priv->plat->est && priv->plat->est->enable &&
> -	    priv->plat->est->max_sdu[queue] &&
> -	    xdpf->len > priv->plat->est->max_sdu[queue]) {
> +	if (priv->est && priv->est->enable &&
> +	    priv->est->max_sdu[queue] &&
> +	    xdpf->len > priv->est->max_sdu[queue]) {
>  		priv->xstats.max_sdu_txq_drop[queue]++;
>  		return STMMAC_XDP_CONSUMED;
>  	}
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> index e04830a3a1fb..a6b1de9a251d 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> @@ -68,13 +68,13 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
>  	nsec = reminder;
>  
>  	/* If EST is enabled, disabled it before adjust ptp time. */
> -	if (priv->plat->est && priv->plat->est->enable) {
> +	if (priv->est && priv->est->enable) {
>  		est_rst = true;
> -		mutex_lock(&priv->plat->est->lock);
> -		priv->plat->est->enable = false;
> -		stmmac_est_configure(priv, priv, priv->plat->est,
> +		mutex_lock(&priv->est_lock);
> +		priv->est->enable = false;
> +		stmmac_est_configure(priv, priv, priv->est,
>  				     priv->plat->clk_ptp_rate);
> -		mutex_unlock(&priv->plat->est->lock);
> +		mutex_unlock(&priv->est_lock);
>  	}
>  
>  	write_lock_irqsave(&priv->ptp_lock, flags);
> @@ -87,24 +87,24 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
>  		ktime_t current_time_ns, basetime;
>  		u64 cycle_time;
>  
> -		mutex_lock(&priv->plat->est->lock);
> +		mutex_lock(&priv->est_lock);
>  		priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
>  		current_time_ns = timespec64_to_ktime(current_time);
> -		time.tv_nsec = priv->plat->est->btr_reserve[0];
> -		time.tv_sec = priv->plat->est->btr_reserve[1];
> +		time.tv_nsec = priv->est->btr_reserve[0];
> +		time.tv_sec = priv->est->btr_reserve[1];
>  		basetime = timespec64_to_ktime(time);
> -		cycle_time = (u64)priv->plat->est->ctr[1] * NSEC_PER_SEC +
> -			     priv->plat->est->ctr[0];
> +		cycle_time = (u64)priv->est->ctr[1] * NSEC_PER_SEC +
> +			     priv->est->ctr[0];
>  		time = stmmac_calc_tas_basetime(basetime,
>  						current_time_ns,
>  						cycle_time);
>  
> -		priv->plat->est->btr[0] = (u32)time.tv_nsec;
> -		priv->plat->est->btr[1] = (u32)time.tv_sec;
> -		priv->plat->est->enable = true;
> -		ret = stmmac_est_configure(priv, priv, priv->plat->est,
> +		priv->est->btr[0] = (u32)time.tv_nsec;
> +		priv->est->btr[1] = (u32)time.tv_sec;
> +		priv->est->enable = true;
> +		ret = stmmac_est_configure(priv, priv, priv->est,
>  					   priv->plat->clk_ptp_rate);
> -		mutex_unlock(&priv->plat->est->lock);
> +		mutex_unlock(&priv->est_lock);
>  		if (ret)
>  			netdev_err(priv->dev, "failed to configure EST\n");
>  	}
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> index cce00719937d..222540b55480 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> @@ -918,7 +918,6 @@ struct timespec64 stmmac_calc_tas_basetime(ktime_t old_base_time,
>  static void tc_taprio_map_maxsdu_txq(struct stmmac_priv *priv,
>  				     struct tc_taprio_qopt_offload *qopt)
>  {
> -	struct plat_stmmacenet_data *plat = priv->plat;
>  	u32 num_tc = qopt->mqprio.qopt.num_tc;
>  	u32 offset, count, i, j;
>  
> @@ -933,7 +932,7 @@ static void tc_taprio_map_maxsdu_txq(struct stmmac_priv *priv,
>  		count = qopt->mqprio.qopt.count[i];
>  
>  		for (j = offset; j < offset + count; j++)
> -			plat->est->max_sdu[j] = qopt->max_sdu[i] + ETH_HLEN - ETH_TLEN;
> +			priv->est->max_sdu[j] = qopt->max_sdu[i] + ETH_HLEN - ETH_TLEN;
>  	}
>  }
>  
> @@ -941,7 +940,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
>  			       struct tc_taprio_qopt_offload *qopt)
>  {
>  	u32 size, wid = priv->dma_cap.estwid, dep = priv->dma_cap.estdep;
> -	struct plat_stmmacenet_data *plat = priv->plat;
>  	struct timespec64 time, current_time, qopt_time;
>  	ktime_t current_time_ns;
>  	bool fpe = false;
> @@ -998,23 +996,25 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
>  	if (qopt->cycle_time_extension >= BIT(wid + 7))
>  		return -ERANGE;
>  
> -	if (!plat->est) {
> -		plat->est = devm_kzalloc(priv->device, sizeof(*plat->est),
> +	if (!priv->est) {
> +		priv->est = devm_kzalloc(priv->device, sizeof(*priv->est),
>  					 GFP_KERNEL);
> -		if (!plat->est)
> +		if (!priv->est)
>  			return -ENOMEM;
>  
> -		mutex_init(&priv->plat->est->lock);
> +		mutex_init(&priv->est_lock);
>  	} else {
> -		memset(plat->est, 0, sizeof(*plat->est));
> +		mutex_lock(&priv->est_lock);
> +		memset(priv->est, 0, sizeof(*priv->est));
> +		mutex_unlock(&priv->est_lock);
>  	}
>  
>  	size = qopt->num_entries;
>  
> -	mutex_lock(&priv->plat->est->lock);
> -	priv->plat->est->gcl_size = size;
> -	priv->plat->est->enable = qopt->cmd == TAPRIO_CMD_REPLACE;
> -	mutex_unlock(&priv->plat->est->lock);
> +	mutex_lock(&priv->est_lock);
> +	priv->est->gcl_size = size;
> +	priv->est->enable = qopt->cmd == TAPRIO_CMD_REPLACE;
> +	mutex_unlock(&priv->est_lock);
>  
>  	for (i = 0; i < size; i++) {
>  		s64 delta_ns = qopt->entries[i].interval;
> @@ -1042,33 +1042,33 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
>  			return -EOPNOTSUPP;
>  		}
>  
> -		priv->plat->est->gcl[i] = delta_ns | (gates << wid);
> +		priv->est->gcl[i] = delta_ns | (gates << wid);
>  	}
>  
> -	mutex_lock(&priv->plat->est->lock);
> +	mutex_lock(&priv->est_lock);
>  	/* Adjust for real system time */
>  	priv->ptp_clock_ops.gettime64(&priv->ptp_clock_ops, &current_time);
>  	current_time_ns = timespec64_to_ktime(current_time);
>  	time = stmmac_calc_tas_basetime(qopt->base_time, current_time_ns,
>  					qopt->cycle_time);
>  
> -	priv->plat->est->btr[0] = (u32)time.tv_nsec;
> -	priv->plat->est->btr[1] = (u32)time.tv_sec;
> +	priv->est->btr[0] = (u32)time.tv_nsec;
> +	priv->est->btr[1] = (u32)time.tv_sec;
>  
>  	qopt_time = ktime_to_timespec64(qopt->base_time);
> -	priv->plat->est->btr_reserve[0] = (u32)qopt_time.tv_nsec;
> -	priv->plat->est->btr_reserve[1] = (u32)qopt_time.tv_sec;
> +	priv->est->btr_reserve[0] = (u32)qopt_time.tv_nsec;
> +	priv->est->btr_reserve[1] = (u32)qopt_time.tv_sec;
>  
>  	ctr = qopt->cycle_time;
> -	priv->plat->est->ctr[0] = do_div(ctr, NSEC_PER_SEC);
> -	priv->plat->est->ctr[1] = (u32)ctr;
> +	priv->est->ctr[0] = do_div(ctr, NSEC_PER_SEC);
> +	priv->est->ctr[1] = (u32)ctr;
>  
> -	priv->plat->est->ter = qopt->cycle_time_extension;
> +	priv->est->ter = qopt->cycle_time_extension;
>  
>  	tc_taprio_map_maxsdu_txq(priv, qopt);
>  
>  	if (fpe && !priv->dma_cap.fpesel) {
> -		mutex_unlock(&priv->plat->est->lock);
> +		mutex_unlock(&priv->est_lock);
>  		return -EOPNOTSUPP;
>  	}
>  
> @@ -1077,9 +1077,9 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
>  	 */
>  	priv->plat->fpe_cfg->enable = fpe;
>  
> -	ret = stmmac_est_configure(priv, priv, priv->plat->est,
> +	ret = stmmac_est_configure(priv, priv, priv->est,
>  				   priv->plat->clk_ptp_rate);
> -	mutex_unlock(&priv->plat->est->lock);
> +	mutex_unlock(&priv->est_lock);
>  	if (ret) {
>  		netdev_err(priv->dev, "failed to configure EST\n");
>  		goto disable;
> @@ -1095,17 +1095,17 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
>  	return 0;
>  
>  disable:
> -	if (priv->plat->est) {
> -		mutex_lock(&priv->plat->est->lock);
> -		priv->plat->est->enable = false;
> -		stmmac_est_configure(priv, priv, priv->plat->est,
> +	if (priv->est) {
> +		mutex_lock(&priv->est_lock);
> +		priv->est->enable = false;
> +		stmmac_est_configure(priv, priv, priv->est,
>  				     priv->plat->clk_ptp_rate);
>  		/* Reset taprio status */
>  		for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
>  			priv->xstats.max_sdu_txq_drop[i] = 0;
>  			priv->xstats.mtl_est_txq_hlbf[i] = 0;
>  		}
> -		mutex_unlock(&priv->plat->est->lock);
> +		mutex_unlock(&priv->est_lock);
>  	}
>  
>  	priv->plat->fpe_cfg->enable = false;
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index dfa1828cd756..8aa255485a35 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -117,7 +117,6 @@ struct stmmac_axi {
>  
>  #define EST_GCL		1024
>  struct stmmac_est {
> -	struct mutex lock;
>  	int enable;
>  	u32 btr_reserve[2];
>  	u32 btr_offset[2];
> @@ -246,7 +245,6 @@ struct plat_stmmacenet_data {
>  	struct fwnode_handle *port_node;
>  	struct device_node *mdio_node;
>  	struct stmmac_dma_cfg *dma_cfg;
> -	struct stmmac_est *est;
>  	struct stmmac_fpe_cfg *fpe_cfg;
>  	struct stmmac_safety_feature_cfg *safety_feat_cfg;
>  	int clk_csr;
> -- 
> 2.25.1
> 


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ