| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240510152620.2227312-7-aleksander.lobakin@intel.com>
Date: Fri, 10 May 2024 17:26:14 +0200
From: Alexander Lobakin <aleksander.lobakin@...el.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: Alexander Lobakin <aleksander.lobakin@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
nex.sw.ncis.osdt.itp.upstreaming@...el.com,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH RFC iwl-next 06/12] idpf: merge singleq and splitq &net_device_ops
It makes no sense to have a second &net_device_ops struct (800 bytes of
rodata) with only one difference in .ndo_start_xmit, which can easily
be just one `if`. This `if` is a drop in the ocean and you won't see
any difference.
Define unified idpf_xmit_start(). The preparation for sending is the
same, just call either idpf_tx_splitq_frame() or idpf_tx_singleq_frame()
depending on the active model to actually map and send the skb.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@...el.com>
---
drivers/net/ethernet/intel/idpf/idpf_txrx.h | 7 ++---
drivers/net/ethernet/intel/idpf/idpf_lib.c | 26 +++-------------
.../ethernet/intel/idpf/idpf_singleq_txrx.c | 31 ++-----------------
drivers/net/ethernet/intel/idpf/idpf_txrx.c | 10 +++---
4 files changed, 15 insertions(+), 59 deletions(-)
diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
index 0192d33744ff..015aba5abb3c 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h
@@ -1190,10 +1190,9 @@ bool idpf_chk_linearize(struct sk_buff *skb, unsigned int max_bufs,
unsigned int count);
int idpf_tx_maybe_stop_common(struct idpf_tx_queue *tx_q, unsigned int size);
void idpf_tx_timeout(struct net_device *netdev, unsigned int txqueue);
-netdev_tx_t idpf_tx_splitq_start(struct sk_buff *skb,
- struct net_device *netdev);
-netdev_tx_t idpf_tx_singleq_start(struct sk_buff *skb,
- struct net_device *netdev);
+netdev_tx_t idpf_tx_singleq_frame(struct sk_buff *skb,
+ struct idpf_tx_queue *tx_q);
+netdev_tx_t idpf_tx_start(struct sk_buff *skb, struct net_device *netdev);
bool idpf_rx_singleq_buf_hw_alloc_all(struct idpf_rx_queue *rxq,
u16 cleaned_count);
int idpf_tso(struct sk_buff *skb, struct idpf_tx_offload_params *off);
diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index a8be09a89943..fe91475c7b4c 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -4,8 +4,7 @@
#include "idpf.h"
#include "idpf_virtchnl.h"
-static const struct net_device_ops idpf_netdev_ops_splitq;
-static const struct net_device_ops idpf_netdev_ops_singleq;
+static const struct net_device_ops idpf_netdev_ops;
/**
* idpf_init_vector_stack - Fill the MSIX vector stack with vector index
@@ -764,10 +763,7 @@ static int idpf_cfg_netdev(struct idpf_vport *vport)
}
/* assign netdev_ops */
- if (idpf_is_queue_model_split(vport->txq_model))
- netdev->netdev_ops = &idpf_netdev_ops_splitq;
- else
- netdev->netdev_ops = &idpf_netdev_ops_singleq;
+ netdev->netdev_ops = &idpf_netdev_ops;
/* setup watchdog timeout value to be 5 second */
netdev->watchdog_timeo = 5 * HZ;
@@ -2353,24 +2349,10 @@ void idpf_free_dma_mem(struct idpf_hw *hw, struct idpf_dma_mem *mem)
mem->pa = 0;
}
-static const struct net_device_ops idpf_netdev_ops_splitq = {
- .ndo_open = idpf_open,
- .ndo_stop = idpf_stop,
- .ndo_start_xmit = idpf_tx_splitq_start,
- .ndo_features_check = idpf_features_check,
- .ndo_set_rx_mode = idpf_set_rx_mode,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = idpf_set_mac,
- .ndo_change_mtu = idpf_change_mtu,
- .ndo_get_stats64 = idpf_get_stats64,
- .ndo_set_features = idpf_set_features,
- .ndo_tx_timeout = idpf_tx_timeout,
-};
-
-static const struct net_device_ops idpf_netdev_ops_singleq = {
+static const struct net_device_ops idpf_netdev_ops = {
.ndo_open = idpf_open,
.ndo_stop = idpf_stop,
- .ndo_start_xmit = idpf_tx_singleq_start,
+ .ndo_start_xmit = idpf_tx_start,
.ndo_features_check = idpf_features_check,
.ndo_set_rx_mode = idpf_set_rx_mode,
.ndo_validate_addr = eth_validate_addr,
diff --git a/drivers/net/ethernet/intel/idpf/idpf_singleq_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_singleq_txrx.c
index b51f7cd6db01..a3b60a2dfcaa 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_singleq_txrx.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_singleq_txrx.c
@@ -351,8 +351,8 @@ static void idpf_tx_singleq_build_ctx_desc(struct idpf_tx_queue *txq,
*
* Returns NETDEV_TX_OK if sent, else an error code
*/
-static netdev_tx_t idpf_tx_singleq_frame(struct sk_buff *skb,
- struct idpf_tx_queue *tx_q)
+netdev_tx_t idpf_tx_singleq_frame(struct sk_buff *skb,
+ struct idpf_tx_queue *tx_q)
{
struct idpf_tx_offload_params offload = { };
struct idpf_tx_buf *first;
@@ -408,33 +408,6 @@ static netdev_tx_t idpf_tx_singleq_frame(struct sk_buff *skb,
return idpf_tx_drop_skb(tx_q, skb);
}
-/**
- * idpf_tx_singleq_start - Selects the right Tx queue to send buffer
- * @skb: send buffer
- * @netdev: network interface device structure
- *
- * Returns NETDEV_TX_OK if sent, else an error code
- */
-netdev_tx_t idpf_tx_singleq_start(struct sk_buff *skb,
- struct net_device *netdev)
-{
- struct idpf_vport *vport = idpf_netdev_to_vport(netdev);
- struct idpf_tx_queue *tx_q;
-
- tx_q = vport->txqs[skb_get_queue_mapping(skb)];
-
- /* hardware can't handle really short frames, hardware padding works
- * beyond this point
- */
- if (skb_put_padto(skb, IDPF_TX_MIN_PKT_LEN)) {
- idpf_tx_buf_hw_update(tx_q, tx_q->next_to_use, false);
-
- return NETDEV_TX_OK;
- }
-
- return idpf_tx_singleq_frame(skb, tx_q);
-}
-
/**
* idpf_tx_singleq_clean - Reclaim resources from queue
* @tx_q: Tx queue to clean
diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
index 500754795cc8..4aa5ee781bd7 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c
@@ -2849,14 +2849,13 @@ static netdev_tx_t idpf_tx_splitq_frame(struct sk_buff *skb,
}
/**
- * idpf_tx_splitq_start - Selects the right Tx queue to send buffer
+ * idpf_tx_start - Selects the right Tx queue to send buffer
* @skb: send buffer
* @netdev: network interface device structure
*
* Returns NETDEV_TX_OK if sent, else an error code
*/
-netdev_tx_t idpf_tx_splitq_start(struct sk_buff *skb,
- struct net_device *netdev)
+netdev_tx_t idpf_tx_start(struct sk_buff *skb, struct net_device *netdev)
{
struct idpf_vport *vport = idpf_netdev_to_vport(netdev);
struct idpf_tx_queue *tx_q;
@@ -2878,7 +2877,10 @@ netdev_tx_t idpf_tx_splitq_start(struct sk_buff *skb,
return NETDEV_TX_OK;
}
- return idpf_tx_splitq_frame(skb, tx_q);
+ if (idpf_is_queue_model_split(vport->txq_model))
+ return idpf_tx_splitq_frame(skb, tx_q);
+ else
+ return idpf_tx_singleq_frame(skb, tx_q);
}
/**
--
2.45.0
Powered by blists - more mailing lists