| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240514202141.408-2-thinhtr@linux.ibm.com>
Date: Tue, 14 May 2024 15:21:40 -0500
From: Thinh Tran <thinhtr@...ux.ibm.com>
To: netdev@...r.kernel.org, kuba@...nel.org, anthony.l.nguyen@...el.com,
aleksandr.loktionov@...el.com, przemyslaw.kitszel@...el.com,
horms@...nel.org
Cc: jesse.brandeburg@...el.com, davem@...emloft.net, edumazet@...gle.com,
pabeni@...hat.com, intel-wired-lan@...ts.osuosl.org,
rob.thomas@....com, Thinh Tran <thinhtr@...ux.ibm.com>
Subject: [PATCH iwl-net V3,1/2] i40e: fractoring out i40e_suspend/i40e_resume
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been
introduced. These functions were factored out from the existing
i40e_suspend() and i40e_resume() respectively. This factoring was
done due to concerns about the logic of the I40E_SUSPENSED state, which
caused the device not able to recover. The functions are now used in the
EEH handling for device suspend/resume callbacks.
Reordered the function, i40e_enable_mc_magic_wake() has been moved
ahead of i40e_io_suspend() to ensure it is declared before being used.
Tested-by: Robert Thomas <rob.thomas@....com>
Signed-off-by: Thinh Tran <thinhtr@...ux.ibm.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 248 +++++++++++---------
1 file changed, 134 insertions(+), 114 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index ffb9f9f15c52..281c8ec27af2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -16303,6 +16303,138 @@ static void i40e_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
+/**
+ * i40e_enable_mc_magic_wake - enable multicast magic packet wake up
+ * using the mac_address_write admin q function
+ * @pf: pointer to i40e_pf struct
+ **/
+static void i40e_enable_mc_magic_wake(struct i40e_pf *pf)
+{
+ struct i40e_hw *hw = &pf->hw;
+ u8 mac_addr[6];
+ u16 flags = 0;
+ int ret;
+
+ /* Get current MAC address in case it's an LAA */
+ if (pf->vsi[pf->lan_vsi] && pf->vsi[pf->lan_vsi]->netdev) {
+ ether_addr_copy(mac_addr,
+ pf->vsi[pf->lan_vsi]->netdev->dev_addr);
+ } else {
+ dev_err(&pf->pdev->dev,
+ "Failed to retrieve MAC address; using default\n");
+ ether_addr_copy(mac_addr, hw->mac.addr);
+ }
+
+ /* The FW expects the mac address write cmd to first be called with
+ * one of these flags before calling it again with the multicast
+ * enable flags.
+ */
+ flags = I40E_AQC_WRITE_TYPE_LAA_WOL;
+
+ if (hw->func_caps.flex10_enable && hw->partition_id != 1)
+ flags = I40E_AQC_WRITE_TYPE_LAA_ONLY;
+
+ ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL);
+ if (ret) {
+ dev_err(&pf->pdev->dev,
+ "Failed to update MAC address registers; cannot enable Multicast Magic packet wake up");
+ return;
+ }
+
+ flags = I40E_AQC_MC_MAG_EN
+ | I40E_AQC_WOL_PRESERVE_ON_PFR
+ | I40E_AQC_WRITE_TYPE_UPDATE_MC_MAG;
+ ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL);
+ if (ret)
+ dev_err(&pf->pdev->dev,
+ "Failed to enable Multicast Magic Packet wake up\n");
+}
+
+/**
+ * i40e_io_suspend - suspend all IO operations
+ * @pf: pointer to i40e_pf struct
+ *
+ **/
+static int i40e_io_suspend(struct i40e_pf *pf)
+{
+ struct i40e_hw *hw = &pf->hw;
+
+ set_bit(__I40E_DOWN, pf->state);
+
+ /* Ensure service task will not be running */
+ del_timer_sync(&pf->service_timer);
+ cancel_work_sync(&pf->service_task);
+
+ /* Client close must be called explicitly here because the timer
+ * has been stopped.
+ */
+ i40e_notify_client_of_netdev_close(pf->vsi[pf->lan_vsi], false);
+
+ if (test_bit(I40E_HW_CAP_WOL_MC_MAGIC_PKT_WAKE, pf->hw.caps) &&
+ pf->wol_en)
+ i40e_enable_mc_magic_wake(pf);
+
+ /* Since we're going to destroy queues during the
+ * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this
+ * whole section
+ */
+ rtnl_lock();
+
+ i40e_prep_for_reset(pf);
+
+ wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
+ wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
+
+ /* Clear the interrupt scheme and release our IRQs so that the system
+ * can safely hibernate even when there are a large number of CPUs.
+ * Otherwise hibernation might fail when mapping all the vectors back
+ * to CPU0.
+ */
+ i40e_clear_interrupt_scheme(pf);
+
+ rtnl_unlock();
+
+ return 0;
+}
+
+/**
+ * i40e_io_resume - resume IO operations
+ * @pf: pointer to i40e_pf struct
+ *
+ **/
+static int i40e_io_resume(struct i40e_pf *pf)
+{
+ int err;
+
+ /* We need to hold the RTNL lock prior to restoring interrupt schemes,
+ * since we're going to be restoring queues
+ */
+ rtnl_lock();
+
+ /* We cleared the interrupt scheme when we suspended, so we need to
+ * restore it now to resume device functionality.
+ */
+ err = i40e_restore_interrupt_scheme(pf);
+ if (err) {
+ dev_err(&pf->pdev->dev, "Cannot restore interrupt scheme: %d\n",
+ err);
+ }
+
+ clear_bit(__I40E_DOWN, pf->state);
+ i40e_reset_and_rebuild(pf, false, true);
+
+ rtnl_unlock();
+
+ /* Clear suspended state last after everything is recovered */
+ clear_bit(__I40E_SUSPENDED, pf->state);
+
+ /* Restart the service task */
+ mod_timer(&pf->service_timer,
+ round_jiffies(jiffies + pf->service_timer_period));
+
+ return 0;
+}
+
/**
* i40e_pci_error_detected - warning that something funky happened in PCI land
* @pdev: PCI device information struct
@@ -16415,53 +16547,6 @@ static void i40e_pci_error_resume(struct pci_dev *pdev)
i40e_handle_reset_warning(pf, false);
}
-/**
- * i40e_enable_mc_magic_wake - enable multicast magic packet wake up
- * using the mac_address_write admin q function
- * @pf: pointer to i40e_pf struct
- **/
-static void i40e_enable_mc_magic_wake(struct i40e_pf *pf)
-{
- struct i40e_hw *hw = &pf->hw;
- u8 mac_addr[6];
- u16 flags = 0;
- int ret;
-
- /* Get current MAC address in case it's an LAA */
- if (pf->vsi[pf->lan_vsi] && pf->vsi[pf->lan_vsi]->netdev) {
- ether_addr_copy(mac_addr,
- pf->vsi[pf->lan_vsi]->netdev->dev_addr);
- } else {
- dev_err(&pf->pdev->dev,
- "Failed to retrieve MAC address; using default\n");
- ether_addr_copy(mac_addr, hw->mac.addr);
- }
-
- /* The FW expects the mac address write cmd to first be called with
- * one of these flags before calling it again with the multicast
- * enable flags.
- */
- flags = I40E_AQC_WRITE_TYPE_LAA_WOL;
-
- if (hw->func_caps.flex10_enable && hw->partition_id != 1)
- flags = I40E_AQC_WRITE_TYPE_LAA_ONLY;
-
- ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL);
- if (ret) {
- dev_err(&pf->pdev->dev,
- "Failed to update MAC address registers; cannot enable Multicast Magic packet wake up");
- return;
- }
-
- flags = I40E_AQC_MC_MAG_EN
- | I40E_AQC_WOL_PRESERVE_ON_PFR
- | I40E_AQC_WRITE_TYPE_UPDATE_MC_MAG;
- ret = i40e_aq_mac_address_write(hw, flags, mac_addr, NULL);
- if (ret)
- dev_err(&pf->pdev->dev,
- "Failed to enable Multicast Magic Packet wake up\n");
-}
-
/**
* i40e_shutdown - PCI callback for shutting down
* @pdev: PCI device information struct
@@ -16521,48 +16606,11 @@ static void i40e_shutdown(struct pci_dev *pdev)
static int __maybe_unused i40e_suspend(struct device *dev)
{
struct i40e_pf *pf = dev_get_drvdata(dev);
- struct i40e_hw *hw = &pf->hw;
/* If we're already suspended, then there is nothing to do */
if (test_and_set_bit(__I40E_SUSPENDED, pf->state))
return 0;
-
- set_bit(__I40E_DOWN, pf->state);
-
- /* Ensure service task will not be running */
- del_timer_sync(&pf->service_timer);
- cancel_work_sync(&pf->service_task);
-
- /* Client close must be called explicitly here because the timer
- * has been stopped.
- */
- i40e_notify_client_of_netdev_close(pf->vsi[pf->lan_vsi], false);
-
- if (test_bit(I40E_HW_CAP_WOL_MC_MAGIC_PKT_WAKE, pf->hw.caps) &&
- pf->wol_en)
- i40e_enable_mc_magic_wake(pf);
-
- /* Since we're going to destroy queues during the
- * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this
- * whole section
- */
- rtnl_lock();
-
- i40e_prep_for_reset(pf);
-
- wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
- wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
-
- /* Clear the interrupt scheme and release our IRQs so that the system
- * can safely hibernate even when there are a large number of CPUs.
- * Otherwise hibernation might fail when mapping all the vectors back
- * to CPU0.
- */
- i40e_clear_interrupt_scheme(pf);
-
- rtnl_unlock();
-
- return 0;
+ return i40e_io_suspend(pf);
}
/**
@@ -16572,39 +16620,11 @@ static int __maybe_unused i40e_suspend(struct device *dev)
static int __maybe_unused i40e_resume(struct device *dev)
{
struct i40e_pf *pf = dev_get_drvdata(dev);
- int err;
/* If we're not suspended, then there is nothing to do */
if (!test_bit(__I40E_SUSPENDED, pf->state))
return 0;
-
- /* We need to hold the RTNL lock prior to restoring interrupt schemes,
- * since we're going to be restoring queues
- */
- rtnl_lock();
-
- /* We cleared the interrupt scheme when we suspended, so we need to
- * restore it now to resume device functionality.
- */
- err = i40e_restore_interrupt_scheme(pf);
- if (err) {
- dev_err(dev, "Cannot restore interrupt scheme: %d\n",
- err);
- }
-
- clear_bit(__I40E_DOWN, pf->state);
- i40e_reset_and_rebuild(pf, false, true);
-
- rtnl_unlock();
-
- /* Clear suspended state last after everything is recovered */
- clear_bit(__I40E_SUSPENDED, pf->state);
-
- /* Restart the service task */
- mod_timer(&pf->service_timer,
- round_jiffies(jiffies + pf->service_timer_period));
-
- return 0;
+ return i40e_io_resume(pf);
}
static const struct pci_error_handlers i40e_err_handler = {
--
2.25.1
Powered by blists - more mailing lists