lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <095fc242-ef9f-441d-b376-f2cfd4d5759a@intel.com>
Date: Thu, 16 May 2024 12:40:12 +0200
From: Alexander Lobakin <aleksander.lobakin@...el.com>
To: "Tantilov, Emil S" <emil.s.tantilov@...el.com>
CC: <intel-wired-lan@...ts.osuosl.org>, <netdev@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, Eric Dumazet <edumazet@...gle.com>, "Tony
 Nguyen" <anthony.l.nguyen@...el.com>,
	<nex.sw.ncis.osdt.itp.upstreaming@...el.com>, Jakub Kicinski
	<kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, "David S. Miller"
	<davem@...emloft.net>
Subject: Re: [Intel-wired-lan] [PATCH RFC iwl-next 07/12] idpf: compile
 singleq code only under default-n CONFIG_IDPF_SINGLEQ

From: Tantilov, Emil S <emil.s.tantilov@...el.com>
Date: Mon, 13 May 2024 19:01:30 -0700

> On 5/10/2024 8:26 AM, Alexander Lobakin wrote:
>> Currently, there's no HW supporting idpf in the singleq model. Still,
>> this dead code is supported by the driver and often times add hotpath
> The driver supports the HW in single queue mode (not the other way
> around), so I would like to point out that all current HW on which idpf
> can load supports this model.

But no hardware currently wants to work in this mode.

> 
>> branches and redundant cacheline accesses.
>> While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
>> the singleq code only when it's enabled manually. This corresponds to
>> -10 Kb of object code size and a good bunch of hotpath checks.
>> idpf_is_queue_model_split() works as a gate and compiles out to `true`
>> when the config option is disabled.
> Compiling singleq out does introduce an issue for the users that would
> end up without a netdev if the driver is loaded on a setup where the

There will be a message in dmesg saying that the support is not compiled in.

> Control Plane is configured for singlq mode. In that scenario the user

Any real world examples where the CP requests singleq mode?

> will have to recompile the driver/kernel in order to load the driver
> successfully.

All distros will have it enabled as usually.

> 
>>
>> Signed-off-by: Alexander Lobakin <aleksander.lobakin@...el.com>
>> ---
>>   drivers/net/ethernet/intel/Kconfig            | 13 +---------
>>   drivers/net/ethernet/intel/idpf/Kconfig       | 26 +++++++++++++++++++
>>   drivers/net/ethernet/intel/idpf/Makefile      |  3 ++-
>>   drivers/net/ethernet/intel/idpf/idpf.h        |  3 ++-
>>   drivers/net/ethernet/intel/idpf/idpf_txrx.c   |  2 +-
>>   .../net/ethernet/intel/idpf/idpf_virtchnl.c   | 15 ++++++++---
>>   6 files changed, 43 insertions(+), 19 deletions(-)
>>   create mode 100644 drivers/net/ethernet/intel/idpf/Kconfig
>>
>> diff --git a/drivers/net/ethernet/intel/Kconfig
>> b/drivers/net/ethernet/intel/Kconfig
>> index e0287fbd501d..0375c7448a57 100644
>> --- a/drivers/net/ethernet/intel/Kconfig
>> +++ b/drivers/net/ethernet/intel/Kconfig
>> @@ -384,17 +384,6 @@ config IGC_LEDS
>>         Optional support for controlling the NIC LED's with the netdev
>>         LED trigger.
>>   -config IDPF
>> -    tristate "Intel(R) Infrastructure Data Path Function Support"
>> -    depends on PCI_MSI
>> -    select DIMLIB
>> -    select PAGE_POOL
>> -    select PAGE_POOL_STATS
>> -    help
>> -      This driver supports Intel(R) Infrastructure Data Path Function
>> -      devices.
>> -
>> -      To compile this driver as a module, choose M here. The module
>> -      will be called idpf.
>> +source "drivers/net/ethernet/intel/idpf/Kconfig"
>>     endif # NET_VENDOR_INTEL
>> diff --git a/drivers/net/ethernet/intel/idpf/Kconfig
>> b/drivers/net/ethernet/intel/idpf/Kconfig
>> new file mode 100644
>> index 000000000000..bee83a40f218
>> --- /dev/null
>> +++ b/drivers/net/ethernet/intel/idpf/Kconfig
>> @@ -0,0 +1,26 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +# Copyright (C) 2024 Intel Corporation
>> +
>> +config IDPF
>> +    tristate "Intel(R) Infrastructure Data Path Function Support"
>> +    depends on PCI_MSI
>> +    select DIMLIB
>> +    select PAGE_POOL
>> +    select PAGE_POOL_STATS
>> +    help
>> +      This driver supports Intel(R) Infrastructure Data Path Function
>> +      devices.
>> +
>> +      To compile this driver as a module, choose M here. The module
>> +      will be called idpf.
>> +
>> +if IDPF
>> +
>> +config IDPF_SINGLEQ
>> +    bool "idpf singleq support"
>> +    help
>> +      This option enables support for legacy single Rx/Tx queues w/no
>> +      completion and fill queues. Only enable if you have such hardware
> This description is not accurate - all HW supports single queue. The
> configuration is done by the Control Plane. Furthermore, without access
> to the Control Plane config, there is no way for the user to know what
> mode is enabled.

I can rephrase to "if your hardware is configured to work in singleq mode".

Anyway, during both the internal review and this one, no one still gave
me a real world example where the HW wants singleq mode.
When the idpf made it into the kernel, singleq didn't work, which was
proven by several patches from me which fixed critical issues.
If it's not tested and no HW wants this when splitq is available, why
decrease perf by dead code?

> 
> Thanks,
> Emil

Thanks,
Olek

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ