| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1716272619.4598048-1-xuanzhuo@linux.alibaba.com>
Date: Tue, 21 May 2024 14:23:39 +0800
From: Xuan Zhuo <xuanzhuo@...ux.alibaba.com>
To: Jason Wang <jasowang@...hat.com>
Cc: davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
virtualization@...ts.linux.dev,
netdev@...r.kernel.org,
Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>,
"Gia-Khanh Nguyen" <gia-khanh.nguyen@...cle.com>,
mst@...hat.com,
jasowang@...hat.com
Subject: Re: [PATCH net-next] virtio-net: synchronize operstate with admin state on up/down
On Mon, 20 May 2024 09:03:02 +0800, Jason Wang <jasowang@...hat.com> wrote:
> This patch synchronize operstate with admin state per RFC2863.
>
> This is done by trying to toggle the carrier upon open/close and
> synchronize with the config change work. This allows propagate status
> correctly to stacked devices like:
>
> ip link add link enp0s3 macvlan0 type macvlan
> ip link set link enp0s3 down
> ip link show
>
> Before this patch:
>
> 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> ......
> 5: macvlan0@...0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
> link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
>
> After this patch:
>
> 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
> ...
> 5: macvlan0@...0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
> link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
>
> Cc: Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>
> Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
> Signed-off-by: Jason Wang <jasowang@...hat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@...ux.alibaba.com>
Thanks.
> ---
> drivers/net/virtio_net.c | 94 +++++++++++++++++++++++++++-------------
> 1 file changed, 63 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 4e1a0fc0d555..24d880a5023d 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -433,6 +433,12 @@ struct virtnet_info {
> /* The lock to synchronize the access to refill_enabled */
> spinlock_t refill_lock;
>
> + /* Is config change enabled? */
> + bool config_change_enabled;
> +
> + /* The lock to synchronize the access to config_change_enabled */
> + spinlock_t config_change_lock;
> +
> /* Work struct for config space updates */
> struct work_struct config_work;
>
> @@ -623,6 +629,20 @@ static void disable_delayed_refill(struct virtnet_info *vi)
> spin_unlock_bh(&vi->refill_lock);
> }
>
> +static void enable_config_change(struct virtnet_info *vi)
> +{
> + spin_lock_irq(&vi->config_change_lock);
> + vi->config_change_enabled = true;
> + spin_unlock_irq(&vi->config_change_lock);
> +}
> +
> +static void disable_config_change(struct virtnet_info *vi)
> +{
> + spin_lock_irq(&vi->config_change_lock);
> + vi->config_change_enabled = false;
> + spin_unlock_irq(&vi->config_change_lock);
> +}
> +
> static void enable_rx_mode_work(struct virtnet_info *vi)
> {
> rtnl_lock();
> @@ -2421,6 +2441,25 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)
> return err;
> }
>
> +static void virtnet_update_settings(struct virtnet_info *vi)
> +{
> + u32 speed;
> + u8 duplex;
> +
> + if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> + return;
> +
> + virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> +
> + if (ethtool_validate_speed(speed))
> + vi->speed = speed;
> +
> + virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> +
> + if (ethtool_validate_duplex(duplex))
> + vi->duplex = duplex;
> +}
> +
> static int virtnet_open(struct net_device *dev)
> {
> struct virtnet_info *vi = netdev_priv(dev);
> @@ -2439,6 +2478,18 @@ static int virtnet_open(struct net_device *dev)
> goto err_enable_qp;
> }
>
> + /* Assume link up if device can't report link status,
> + otherwise get link status from config. */
> + netif_carrier_off(dev);
> + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> + enable_config_change(vi);
> + schedule_work(&vi->config_work);
> + } else {
> + vi->status = VIRTIO_NET_S_LINK_UP;
> + virtnet_update_settings(vi);
> + netif_carrier_on(dev);
> + }
> +
> return 0;
>
> err_enable_qp:
> @@ -2875,12 +2926,19 @@ static int virtnet_close(struct net_device *dev)
> disable_delayed_refill(vi);
> /* Make sure refill_work doesn't re-enable napi! */
> cancel_delayed_work_sync(&vi->refill);
> + /* Make sure config notification doesn't schedule config work */
> + disable_config_change(vi);
> + /* Make sure status updating is cancelled */
> + cancel_work_sync(&vi->config_work);
>
> for (i = 0; i < vi->max_queue_pairs; i++) {
> virtnet_disable_queue_pair(vi, i);
> cancel_work_sync(&vi->rq[i].dim.work);
> }
>
> + vi->status &= ~VIRTIO_NET_S_LINK_UP;
> + netif_carrier_off(dev);
> +
> return 0;
> }
>
> @@ -4583,25 +4641,6 @@ static void virtnet_init_settings(struct net_device *dev)
> vi->duplex = DUPLEX_UNKNOWN;
> }
>
> -static void virtnet_update_settings(struct virtnet_info *vi)
> -{
> - u32 speed;
> - u8 duplex;
> -
> - if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
> - return;
> -
> - virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
> -
> - if (ethtool_validate_speed(speed))
> - vi->speed = speed;
> -
> - virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
> -
> - if (ethtool_validate_duplex(duplex))
> - vi->duplex = duplex;
> -}
> -
> static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
> {
> return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
> @@ -5163,7 +5202,10 @@ static void virtnet_config_changed(struct virtio_device *vdev)
> {
> struct virtnet_info *vi = vdev->priv;
>
> - schedule_work(&vi->config_work);
> + spin_lock_irq(&vi->config_change_lock);
> + if (vi->config_change_enabled)
> + schedule_work(&vi->config_work);
> + spin_unlock_irq(&vi->config_change_lock);
> }
>
> static void virtnet_free_queues(struct virtnet_info *vi)
> @@ -5706,6 +5748,7 @@ static int virtnet_probe(struct virtio_device *vdev)
> INIT_WORK(&vi->config_work, virtnet_config_changed_work);
> INIT_WORK(&vi->rx_mode_work, virtnet_rx_mode_work);
> spin_lock_init(&vi->refill_lock);
> + spin_lock_init(&vi->config_change_lock);
>
> if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF)) {
> vi->mergeable_rx_bufs = true;
> @@ -5901,17 +5944,6 @@ static int virtnet_probe(struct virtio_device *vdev)
> goto free_unregister_netdev;
> }
>
> - /* Assume link up if device can't report link status,
> - otherwise get link status from config. */
> - netif_carrier_off(dev);
> - if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
> - schedule_work(&vi->config_work);
> - } else {
> - vi->status = VIRTIO_NET_S_LINK_UP;
> - virtnet_update_settings(vi);
> - netif_carrier_on(dev);
> - }
> -
> for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
> if (virtio_has_feature(vi->vdev, guest_offloads[i]))
> set_bit(guest_offloads[i], &vi->guest_offloads);
> --
> 2.31.1
>
Powered by blists - more mailing lists