[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <996df1ab7b4f3a0feeac972f6a87baa591750801.camel@mediatek.com>
Date: Tue, 21 May 2024 09:36:19 +0000
From: SkyLake Huang (黃啟澤)
<SkyLake.Huang@...iatek.com>
To: "linux@...linux.org.uk" <linux@...linux.org.uk>, "andrew@...n.ch"
<andrew@...n.ch>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mediatek@...ts.infradead.org" <linux-mediatek@...ts.infradead.org>,
"kuba@...nel.org" <kuba@...nel.org>, "pabeni@...hat.com" <pabeni@...hat.com>,
"edumazet@...gle.com" <edumazet@...gle.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "dqfext@...il.com"
<dqfext@...il.com>, Steven Liu (劉人豪)
<steven.liu@...iatek.com>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"matthias.bgg@...il.com" <matthias.bgg@...il.com>, "davem@...emloft.net"
<davem@...emloft.net>, "hkallweit1@...il.com" <hkallweit1@...il.com>,
"angelogioacchino.delregno@...labora.com"
<angelogioacchino.delregno@...labora.com>, "daniel@...rotopia.org"
<daniel@...rotopia.org>
Subject: Re: [PATCH net-next v2 5/5] net: phy: add driver for built-in 2.5G
ethernet PHY on MT7988
On Mon, 2024-05-20 at 18:48 +0100, Russell King (Oracle) wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> On Mon, May 20, 2024 at 03:02:21PM +0200, Andrew Lunn wrote:
> > > Actually this phy is strictly binded to (XFI)MAC on this
> platform.
> > > So I directly disable HDX feature of PHY.
> >
> > Sorry, i don't follow your answer:
> >
> > Can the PHY do half duplex?
> > Can the MAC do half duplex?
Sorry about ambiguity.
- Can the PHY do half duplex?
The short answer is no. I clarify the comments like below so everyone
should know this phy's capability
/* This phy can't handle collision, and neither can (XFI)MAC it's
connected to.
* Although it can do HDX handshake, it doesn't support CSMA/CD that
HDX requires.
*/
linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev-
>supported);
- Can the MAC do half duplex?
No.
Daniel has explained MT7988 SoC's network interfaces in v1 patch:
https://lore.kernel.org/netdev/Zjumd3bnZDu9LYGH@makrotopia.org/
- GMAC0 is typically connected as conduit to a 4-port MT7530-like DSA
switch offering 4 1GE user ports. PHY driver mediatek-ge-soc.c takes
care of those, and yes, they do need some "care"...
- GMAC1 can be used with the internal 2.5GE PHY (ie. with the driver
discussed here) OR for to connect an external PHY or SFP via
1000Base-X, 2500Base-X, SGMII, 5GBase-R, 10GBase-R or USXGMII.
- GMAC2 is can only be used with an external PHY or SFP using
1000Base-X, 2500Base-X, SGMII, 5GBase-R, 10GBa
Actually, internal 2.5GbE PHY is connected to XFIMAC via XMGII.
According to IEEE std 802.3-2018 section 46.1(page.188). XGMII provides
for full duplex operation only.
> >
> > The part which cannot do half-duplex should be the part which
> disables
> > half-duplex.
>
> Note that if the PHY is doing rate adaption (preferably in a form
> that
> it can control the MAC transmission rate), then even if the MAC can't
> do half-duplex, the PHY can still do half-duplex.
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Yes, this phy is doing rate adaption. But just like what I said above,
its rate adaption module can't support CSMA/CD.
Sky
Powered by blists - more mailing lists