lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240524085350.359812-1-horatiu.vultur@microchip.com>
Date: Fri, 24 May 2024 10:53:50 +0200
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
	<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <sumang@...vell.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Horatiu Vultur
	<horatiu.vultur@...rochip.com>
Subject: [PATCH net v2] net: micrel: Fix lan8841_config_intr after getting out of sleep mode

When the interrupt is enabled, the function lan8841_config_intr tries to
clear any pending interrupts by reading the interrupt status, then
checks the return value for errors and then continue to enable the
interrupt. It has been seen that once the system gets out of sleep mode,
the interrupt status has the value 0x400 meaning that the PHY detected
that the link was in low power. That is correct value but the problem is
that the check is wrong.  We try to check for errors but we return an
error also in this case which is not an error. Therefore fix this by
returning only when there is an error.

Fixes: a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY")
Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
---
v1->v2:
- do the same also in case the interrupts are disabled.
---
 drivers/net/phy/micrel.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 13e30ea7eec5d..c0773d74d5104 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -4029,7 +4029,7 @@ static int lan8841_config_intr(struct phy_device *phydev)
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		err = phy_read(phydev, LAN8814_INTS);
-		if (err)
+		if (err < 0)
 			return err;
 
 		/* Enable / disable interrupts. It is OK to enable PTP interrupt
@@ -4045,6 +4045,14 @@ static int lan8841_config_intr(struct phy_device *phydev)
 			return err;
 
 		err = phy_read(phydev, LAN8814_INTS);
+		if (err < 0)
+			return err;
+
+		/* Getting a positive value doesn't mean that is an error, it
+		 * just indicates what was the status. Therefore make sure to
+		 * clear the value and say that there is no error.
+		 */
+		err = 0;
 	}
 
 	return err;
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ