netdev - [PATCH net-next 05/15] net/mlx5e: SHAMPO, Disable gso

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240528142807.903965-6-tariqt@nvidia.com>
Date: Tue, 28 May 2024 17:27:57 +0300
From: Tariq Toukan <tariqt@...dia.com>
To: "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>, Eric Dumazet <edumazet@...gle.com>
CC: <netdev@...r.kernel.org>, Saeed Mahameed <saeedm@...dia.com>, Gal Pressman
	<gal@...dia.com>, Leon Romanovsky <leonro@...dia.com>, Dragos Tatulea
	<dtatulea@...dia.com>, Tariq Toukan <tariqt@...dia.com>
Subject: [PATCH net-next 05/15] net/mlx5e: SHAMPO, Disable gso_size for non GRO packets

From: Dragos Tatulea <dtatulea@...dia.com>

When HW GRO is enabled, forwarding of packets is broken due to gso_size
being set incorrectly on non GRO packets.

Non GRO packets have a skb GRO count of 1. mlx5 always sets gso_size on
the skb, even for non GRO packets. It leans on the fact that gso_size is
normally reset in napi_gro_complete(). But this happens only for packets
from GRO'able protocols (TCP/UDP) that have a gro_receive() handler.

The problematic scenarios are:

1) Non GRO protocol packets are received, validate_xmit_skb() will drop
   them (see EPROTONOSUPPORT in skb_mac_gso_segment()). The fix for
   this case would be to not set gso_size at all for SHAMPO packets with
   header size 0.

2) Packets from a GRO'ed protocol (TCP) are received but immediately
   flushed because they are not GRO'able (TCP SYN for example).
   mlx5e_shampo_update_hdr(), which updates the remaining GRO state on
   the skb, is not called because skb GRO count is 1. The fix here would
   be to always call mlx5e_shampo_update_hdr(), regardless of skb GRO
   count. But this call is expensive

The unified fix for both cases is to reset gso_size before calling
napi_gro_receive(). It is a change that is more effective (no call to
mlx5e_shampo_update_hdr() necessary) and simple (smallest code
footprint).

Signed-off-by: Dragos Tatulea <dtatulea@...dia.com>
Signed-off-by: Tariq Toukan <tariqt@...dia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index b3ef0dd23729..a13fa760f948 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -2267,6 +2267,8 @@ mlx5e_shampo_flush_skb(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe, bool match)
 		mlx5e_shampo_align_fragment(skb, rq->mpwqe.log_stride_sz);
 	if (NAPI_GRO_CB(skb)->count > 1)
 		mlx5e_shampo_update_hdr(rq, cqe, match);
+	else
+		skb_shinfo(skb)->gso_size = 0;
 	napi_gro_receive(rq->cq.napi, skb);
 	rq->hw_gro_data->skb = NULL;
 }
-- 
2.31.1