[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240528191823.17775-1-admiyo@os.amperecomputing.com>
Date: Tue, 28 May 2024 15:18:20 -0400
From: admiyo@...amperecomputing.com
To:
Cc: netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 0/3] MCTP over PCC
From: Adam Young <admiyo@...amperecomputing.com>
This series adds support for the Management Control Transport Protocol (MCTP)
over the Platform Communication Channel (PCC) mechanism.
MCTP defines a communication model intended to
facilitate communication between Management controllers
and other management controllers, and between Management
controllers and management devices
PCC is a mechanism for communication between components within
the Platform. It is a composed of shared memory regions,
interrupt registers, and status registers.
The MCTP over PCC driver makes use of two PCC channels. For
sending messages, it uses a Type 3 channel, and for receiving
messages it uses the paired Type 4 channel. The device
and corresponding channels are specified via ACPI.
Changes in V2
- All Variable Declarations are in reverse Xmass Tree Format
- All Checkpatch Warnings Are Fixed
- Removed Dead code
- Added packet tx/rx stats
- Removed network physical address. This is still in
disucssion in the spec, and will be added once there
is consensus. The protocol can be used with out it.
This also lead to the removal of the Big Endian
conversions.
- Avoided using non volatile pointers in copy to and from io space
- Reorderd the patches to put the ACK check for the PCC Mailbox
as a pre-requisite. The corresponding change for the MCTP
driver has been inlined in the main patch.
- Replaced magic numbers with constants, fixed typos, and other
minor changes from code review.
Code Review Change not made
- Did not change the module init unload function to use the
ACPI equivalent as they do not remove all devices prior
to unload, leading to dangling references and seg faults.
Adam Young (3):
mctp pcc: Check before sending MCTP PCC response ACK
mctp pcc: Allow PCC Data Type in MCTP resource.
mctp pcc: Implement MCTP over PCC Transport
drivers/acpi/acpica/rsaddr.c | 2 +-
drivers/mailbox/pcc.c | 5 +-
drivers/net/mctp/Kconfig | 13 ++
drivers/net/mctp/Makefile | 1 +
drivers/net/mctp/mctp-pcc.c | 361 +++++++++++++++++++++++++++++++++++
include/acpi/pcc.h | 1 +
6 files changed, 381 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/mctp/mctp-pcc.c
--
2.34.1
Powered by blists - more mailing lists