netdev - [PATCH net] net: phy: Micrel KSZ8061: fix errata solution not taking effect problem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1716932254-3703-1-git-send-email-Tristram.Ha@microchip.com>
Date: Tue, 28 May 2024 14:37:34 -0700
From: <Tristram.Ha@...rochip.com>
To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>
CC: "David S. Miller" <davem@...emloft.net>, Eric Dumazet
	<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
	<pabeni@...hat.com>, <UNGLinuxDriver@...rochip.com>,
	<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Tristram Ha
	<tristram.ha@...rochip.com>
Subject: [PATCH net] net: phy: Micrel KSZ8061: fix errata solution not taking effect problem

From: Tristram Ha <tristram.ha@...rochip.com>

KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata.  This worked in 4.14 kernel but not in newer kernels.  The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning.  This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.

Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@...rochip.com>
---
 drivers/net/phy/micrel.c | 42 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 2b8f8b7f1517..618e532ee5d7 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -866,6 +866,17 @@ static int ksz8061_config_init(struct phy_device *phydev)
 {
 	int ret;
 
+	/* Chip can be powered down by the bootstrap code. */
+	ret = phy_read(phydev, MII_BMCR);
+	if (ret < 0)
+		return ret;
+	if (ret & BMCR_PDOWN) {
+		ret = phy_write(phydev, MII_BMCR, ret & ~BMCR_PDOWN);
+		if (ret < 0)
+			return ret;
+		usleep_range(1000, 2000);
+	}
+
 	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
 	if (ret)
 		return ret;
@@ -2085,6 +2096,35 @@ static int kszphy_resume(struct phy_device *phydev)
 	return 0;
 }
 
+static int ksz8061_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* This function can be called twice when the Ethernet device is on. */
+	ret = phy_read(phydev, MII_BMCR);
+	if (ret < 0)
+		return ret;
+	if (!(ret & BMCR_PDOWN))
+		return 0;
+
+	genphy_resume(phydev);
+	usleep_range(1000, 2000);
+
+	/* Re-program the value after chip is reset. */
+	ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+	if (ret)
+		return ret;
+
+	/* Enable PHY Interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		if (phydev->drv->config_intr)
+			phydev->drv->config_intr(phydev);
+	}
+
+	return 0;
+}
+
 static int kszphy_probe(struct phy_device *phydev)
 {
 	const struct kszphy_type *type = phydev->drv->driver_data;
@@ -5339,7 +5379,7 @@ static struct phy_driver ksphy_driver[] = {
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.suspend	= kszphy_suspend,
-	.resume		= kszphy_resume,
+	.resume		= ksz8061_resume,
 }, {
 	.phy_id		= PHY_ID_KSZ9021,
 	.phy_id_mask	= 0x000ffffe,
-- 
2.34.1