[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <b987281834a734777ad02acf96e968f05024c031.1716973237.git.siyanteng@loongson.cn>
Date: Wed, 29 May 2024 18:19:03 +0800
From: Yanteng Si <siyanteng@...ngson.cn>
To: andrew@...n.ch,
hkallweit1@...il.com,
peppe.cavallaro@...com,
alexandre.torgue@...s.st.com,
joabreu@...opsys.com,
fancer.lancer@...il.com
Cc: Yanteng Si <siyanteng@...ngson.cn>,
Jose.Abreu@...opsys.com,
chenhuacai@...nel.org,
linux@...linux.org.uk,
guyinggang@...ngson.cn,
netdev@...r.kernel.org,
chris.chenfeiyang@...il.com,
si.yanteng@...ux.dev
Subject: [PATCH net-next v13 06/15] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init
Loongson delivers two types of the network devices: Loongson GMAC and
Loongson GNET in the framework of four CPU/Chipsets revisions:
Chip Network PCI Dev ID Synopys Version DMA-channel
LS2K1000 CPU GMAC 0x7a03 v3.50a/v3.73a 1
LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1
LS2K2000 CPU GNET 0x7a13 v3.73a 8
LS7A2000 Chipset GNET 0x7a13 v3.73a 1
The driver currently supports the chips with the Loongson GMAC network
device. As a preparation before adding the Loongson GNET support
detach the Loongson GMAC-specific platform data initializations to the
loongson_gmac_data() method and preserve the common settings in the
loongson_default_data().
While at it drop the return value statement from the
loongson_default_data() method as redundant.
Signed-off-by: Feiyang Chen <chenfeiyang@...ngson.cn>
Signed-off-by: Yinggang Gu <guyinggang@...ngson.cn>
Signed-off-by: Yanteng Si <siyanteng@...ngson.cn>
---
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 739b73f4fc35..ad3f44440963 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -11,7 +11,7 @@
#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+static void loongson_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
@@ -20,16 +20,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = 256;
+ plat->mac_interface = PHY_INTERFACE_MODE_NA;
+
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
- /* Set default number of RX and TX queues to use */
- plat->tx_queues_to_use = 1;
- plat->rx_queues_to_use = 1;
-
/* Disable Priority config by default */
plat->tx_queues_cfg[0].use_prio = false;
plat->rx_queues_cfg[0].use_prio = false;
@@ -42,6 +40,11 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
+}
+
+static int loongson_gmac_data(struct plat_stmmacenet_data *plat)
+{
+ loongson_default_data(plat);
return 0;
}
@@ -111,11 +114,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
}
plat->phy_interface = phy_mode;
- plat->mac_interface = PHY_INTERFACE_MODE_GMII;
pci_set_master(pdev);
- loongson_default_data(plat);
+ loongson_gmac_data(plat);
pci_enable_msi(pdev);
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[0];
@@ -140,6 +142,9 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
goto err_disable_msi;
}
+ plat->tx_queues_to_use = 1;
+ plat->rx_queues_to_use = 1;
+
ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
if (ret)
goto err_disable_msi;
--
2.31.4
Powered by blists - more mailing lists