[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240529140256.1849764-3-rengarajan.s@microchip.com>
Date: Wed, 29 May 2024 19:32:56 +0530
From: Rengarajan S <rengarajan.s@...rochip.com>
To: <woojung.huh@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <netdev@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <rengarajan.s@...rochip.com>
Subject: [PATCH net-next v3 2/2] lan78xx: Enable Auto Speed and Auto Duplex configuration for LAN7801 if NO EEPROM is detected
Enabled ASD/ADD configuration for LAN7801 in the absence of EEPROM.
After the lite reset these contents go back to defaults where ASD/
ADD is disabled. The check is already available for LAN7800.
Reviewed-by: Simon Horman <horms@...nel.org>
Signed-off-by: Rengarajan S <rengarajan.s@...rochip.com>
---
drivers/net/usb/lan78xx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 7ac540cc3686..62dbfff8dad4 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -3034,8 +3034,11 @@ static int lan78xx_reset(struct lan78xx_net *dev)
return ret;
/* LAN7801 only has RGMII mode */
- if (dev->chipid == ID_REV_CHIP_ID_7801_)
+ if (dev->chipid == ID_REV_CHIP_ID_7801_) {
buf &= ~MAC_CR_GMII_EN_;
+ /* Enable Auto Duplex and Auto speed */
+ buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
+ }
if (dev->chipid == ID_REV_CHIP_ID_7800_ ||
dev->chipid == ID_REV_CHIP_ID_7850_) {
--
2.25.1
Powered by blists - more mailing lists