lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240531193050.4132-1-ronak.doshi@broadcom.com>
Date: Fri, 31 May 2024 12:30:45 -0700
From: Ronak Doshi <ronak.doshi@...adcom.com>
To: <netdev@...r.kernel.org>
CC: Ronak Doshi <ronak.doshi@...adcom.com>, Broadcom internal kernel review
 list <bcm-kernel-feedback-list@...adcom.com>, "David S. Miller"
	<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
	<kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, open list
	<linux-kernel@...r.kernel.org>
Subject: [PATCH v2 net-next 0/4] vmxnet3: upgrade to version 9

vmxnet3 emulation has recently added timestamping feature which allows the
hypervisor (ESXi) to calculate latency from guest virtual NIC driver to all
the way up to the physical NIC. This patch series extends vmxnet3 driver
to leverage these new feature.

Compatibility is maintained using existing vmxnet3 versioning mechanism as
follows:
- new features added to vmxnet3 emulation are associated with new vmxnet3
   version viz. vmxnet3 version 9.
- emulation advertises all the versions it supports to the driver.
- during initialization, vmxnet3 driver picks the highest version number
supported by both the emulation and the driver and configures emulation
to run at that version.

In particular, following changes are introduced:

Patch 1:
  This patch introduces utility macros for vmxnet3 version 9 comparison
  and updates Copyright information.

Patch 2:
  This patch adds support to timestamp the packets so as to allow latency
  measurement in the ESXi.

Patch 3:
  This patch adds support to disable certain offloads on the device based
  on the request specified by the user in the VM configuration.

Patch 4:
  With all vmxnet3 version 9 changes incorporated in the vmxnet3 driver,
  with this patch, the driver can configure emulation to run at vmxnet3
  version 9.

Changes in v1:
  - make latency measurement and rdpmc read x86 specific in patch 2.
  - use BIT macro.

Changes in v1 -> v2:
  - remove unnecessary parantheses, add feature config details in patch 2.
  - remove changes in fix_features in patch 3 as offloads are anyways not reported.

Ronak Doshi (4):
  vmxnet3: prepare for version 9 changes
  vmxnet3: add latency measurement support in vmxnet3
  vmxnet3: add command to allow disabling of offloads
  vmxnet3: update to version 9

 drivers/net/vmxnet3/Makefile          |   2 +-
 drivers/net/vmxnet3/vmxnet3_defs.h    |  61 +++++++++-
 drivers/net/vmxnet3/vmxnet3_drv.c     | 217 +++++++++++++++++++++++++++-------
 drivers/net/vmxnet3/vmxnet3_ethtool.c |   2 +-
 drivers/net/vmxnet3/vmxnet3_int.h     |  33 +++++-
 5 files changed, 266 insertions(+), 49 deletions(-)

-- 
2.11.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ