[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240603092757.71902-11-christophe.roullier@foss.st.com>
Date: Mon, 3 Jun 2024 11:27:56 +0200
From: Christophe Roullier <christophe.roullier@...s.st.com>
To: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni
<pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue
<alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>,
Jose Abreu <joabreu@...opsys.com>, Liam Girdwood <lgirdwood@...il.com>,
Mark
Brown <broonie@...nel.org>,
Christophe Roullier
<christophe.roullier@...s.st.com>,
Marek Vasut <marex@...x.de>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 10/11] ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
Ethernet1: RMII with crystal
PHY used is SMSC (LAN8742A)
Signed-off-by: Christophe Roullier <christophe.roullier@...s.st.com>
---
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 567e53ad285fa..cebe9b91eced9 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -19,6 +19,7 @@ / {
compatible = "st,stm32mp135f-dk", "st,stm32mp135";
aliases {
+ ethernet0 = ðernet1;
serial0 = &uart4;
serial1 = &usart1;
serial2 = &uart8;
@@ -141,6 +142,29 @@ &cryp {
status = "okay";
};
+ðernet1 {
+ status = "okay";
+ pinctrl-0 = <ð1_rmii_pins_a>;
+ pinctrl-1 = <ð1_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ max-speed = <100>;
+ phy-handle = <&phy0_eth1>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0_eth1: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c131";
+ reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>;
+ reg = <0>;
+ wakeup-source;
+ };
+ };
+};
+
&i2c1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_pins_a>;
--
2.25.1
Powered by blists - more mailing lists