netdev - [PATCH net-next v3] net: ti: icssg-prueth: Add multicast filtering support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date: Wed, 5 Jun 2024 15:22:23 +0530
From: MD Danish Anwar <danishanwar@...com>
To: Dan Carpenter <dan.carpenter@...aro.org>,
        Jan Kiszka
	<jan.kiszka@...mens.com>,
        Diogo Ivo <diogo.ivo@...mens.com>, Andrew Lunn
	<andrew@...n.ch>,
        Simon Horman <horms@...nel.org>, Paolo Abeni
	<pabeni@...hat.com>,
        Jakub Kicinski <kuba@...nel.org>, Eric Dumazet
	<edumazet@...gle.com>,
        "David S. Miller" <davem@...emloft.net>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
        Vignesh Raghavendra
	<vigneshr@...com>,
        Roger Quadros <rogerq@...nel.org>,
        MD Danish Anwar
	<danishanwar@...com>,
        Wojciech Drewek <wojciech.drewek@...el.com>
Subject: [PATCH net-next v3] net: ti: icssg-prueth: Add multicast filtering support

Add multicast filtering support for ICSSG Driver. Multicast addresses will
be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and
icssg_prueth_del_mcast() will be sync and unsync APIs for the driver
respectively.

To add a mac_address for a port, driver needs to call icssg_fdb_add_del()
and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware
will then configure the rules and allow filtering.

If a mac_address is added to port0 and the same mac_address needs to be
added for port1, driver needs to pass BIT(port0) | BIT(port1) to the
icssg_fdb_add_del() API. If driver just pass BIT(port1) then the entry for
port0 will be overwritten / lost. This is a design constraint on the
firmware side.

To overcome this in the driver, to add any mac_address for let's say portX
driver first checks if the same mac_address is already added for any other
port. If yes driver calls icssg_fdb_add_del() with BIT(portX) |
BIT(other_existing_port). If not, driver calls icssg_fdb_add_del() with
BIT(portX).

The same thing is applicable for deleting mac_addresses as well. This
logic is in icssg_prueth_add_mcast / icssg_prueth_del_mcast APIs.

Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
Cc: Wojciech Drewek <wojciech.drewek@...el.com>

v2 -> v3:
*) Using __dev_mc_sync() instead of __hw_addr_sync_dev().
*) Stopped keeping local copy of multicast list as pointed out by
   Wojciech Drewek <wojciech.drewek@...el.com>

v1 -> v2:
*) Rebased on latest net-next/main.

NOTE: This series can be applied cleanly on the tip of net-next/main. This
series doesn't depend on any other ICSSG driver related series that is
floating around in netdev.

v1 https://lore.kernel.org/all/20240516091752.2969092-1-danishanwar@ti.com/
v2 https://lore.kernel.org/all/20240604114402.1835973-1-danishanwar@ti.com/

 drivers/net/ethernet/ti/icssg/icssg_prueth.c | 38 +++++++++++++++++---
 1 file changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index 6e65aa0977d4..e13835100754 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -439,6 +439,37 @@ const struct icss_iep_clockops prueth_iep_clockops = {
 	.perout_enable = prueth_perout_enable,
 };

+static int icssg_prueth_add_mcast(struct net_device *ndev, const u8 *addr)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+	int port_mask = BIT(emac->port_id);
+
+	port_mask |= icssg_fdb_lookup(emac, addr, 0);
+	icssg_fdb_add_del(emac, addr, 0, port_mask, true);
+	icssg_vtbl_modify(emac, 0, port_mask, port_mask, true);
+
+	return 0;
+}
+
+static int icssg_prueth_del_mcast(struct net_device *ndev, const u8 *addr)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+	int port_mask = BIT(emac->port_id);
+	int other_port_mask;
+
+	other_port_mask = port_mask ^ icssg_fdb_lookup(emac, addr, 0);
+
+	icssg_fdb_add_del(emac, addr, 0, port_mask, false);
+	icssg_vtbl_modify(emac, 0, port_mask, port_mask, false);
+
+	if (other_port_mask) {
+		icssg_fdb_add_del(emac, addr, 0, other_port_mask, true);
+		icssg_vtbl_modify(emac, 0, other_port_mask, other_port_mask, true);
+	}
+
+	return 0;
+}
+
 /**
  * emac_ndo_open - EMAC device open
  * @ndev: network adapter device
@@ -599,6 +630,8 @@ static int emac_ndo_stop(struct net_device *ndev)

 	icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));

+	__dev_mc_unsync(ndev, icssg_prueth_del_mcast);
+
 	atomic_set(&emac->tdown_cnt, emac->tx_ch_num);
 	/* ensure new tdown_cnt value is visible */
 	smp_mb__after_atomic();
@@ -675,10 +708,7 @@ static void emac_ndo_set_rx_mode_work(struct work_struct *work)
 		return;
 	}

-	if (!netdev_mc_empty(ndev)) {
-		emac_set_port_state(emac, ICSSG_EMAC_PORT_MC_FLOODING_ENABLE);
-		return;
-	}
+	__dev_mc_sync(ndev, icssg_prueth_add_mcast, icssg_prueth_del_mcast);
 }

 /**

base-commit: fd70f0443e24c3888bf4b7f198df6d705c9b8ab2
-- 
2.34.1