| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240605054939.34870-1-wahrenst@gmx.net>
Date: Wed, 5 Jun 2024 07:49:39 +0200
From: Stefan Wahren <wahrenst@....net>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>
Cc: Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Christoph Fritz <chf.fritz@...glemail.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Stefan Wahren <wahrenst@....net>
Subject: [PATCH RFC] qca_spi: Make interrupt remembering atomic
The whole mechanism to remember occurred SPI interrupts is not atomic,
which could lead to unexpected behavior. So fix this by using atomic bit
operations instead.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@....net>
---
drivers/net/ethernet/qualcomm/qca_debug.c | 6 ++----
drivers/net/ethernet/qualcomm/qca_spi.c | 16 ++++++++--------
drivers/net/ethernet/qualcomm/qca_spi.h | 3 +--
3 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index ff3b89e9028e..ad06da0fdaa0 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -98,10 +98,8 @@ qcaspi_info_show(struct seq_file *s, void *what)
seq_printf(s, "IRQ : %d\n",
qca->spi_dev->irq);
- seq_printf(s, "INTR REQ : %u\n",
- qca->intr_req);
- seq_printf(s, "INTR SVC : %u\n",
- qca->intr_svc);
+ seq_printf(s, "INTR : %lx\n",
+ qca->intr);
seq_printf(s, "SPI max speed : %lu\n",
(unsigned long)qca->spi_dev->max_speed_hz);
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 5799ecc88a87..8f7ce6b51a1c 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -35,6 +35,8 @@
#define MAX_DMA_BURST_LEN 5000
+#define SPI_INTR 0
+
/* Modules parameters */
#define QCASPI_CLK_SPEED_MIN 1000000
#define QCASPI_CLK_SPEED_MAX 16000000
@@ -579,14 +581,14 @@ qcaspi_spi_thread(void *data)
continue;
}
- if ((qca->intr_req == qca->intr_svc) &&
+ if (!test_bit(SPI_INTR, &qca->intr) &&
!qca->txr.skb[qca->txr.head])
schedule();
set_current_state(TASK_RUNNING);
- netdev_dbg(qca->net_dev, "have work to do. int: %d, tx_skb: %p\n",
- qca->intr_req - qca->intr_svc,
+ netdev_dbg(qca->net_dev, "have work to do. int: %lu, tx_skb: %p\n",
+ qca->intr,
qca->txr.skb[qca->txr.head]);
qcaspi_qca7k_sync(qca, QCASPI_EVENT_UPDATE);
@@ -600,8 +602,7 @@ qcaspi_spi_thread(void *data)
msleep(QCASPI_QCA7K_REBOOT_TIME_MS);
}
- if (qca->intr_svc != qca->intr_req) {
- qca->intr_svc = qca->intr_req;
+ if (test_and_clear_bit(SPI_INTR, &qca->intr)) {
start_spi_intr_handling(qca, &intr_cause);
if (intr_cause & SPI_INT_CPU_ON) {
@@ -663,7 +664,7 @@ qcaspi_intr_handler(int irq, void *data)
{
struct qcaspi *qca = data;
- qca->intr_req++;
+ set_bit(SPI_INTR, &qca->intr);
if (qca->spi_thread)
wake_up_process(qca->spi_thread);
@@ -679,8 +680,7 @@ qcaspi_netdev_open(struct net_device *dev)
if (!qca)
return -EINVAL;
- qca->intr_req = 1;
- qca->intr_svc = 0;
+ set_bit(SPI_INTR, &qca->intr);
qca->sync = QCASPI_SYNC_UNKNOWN;
qcafrm_fsm_init_spi(&qca->frm_handle);
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.h b/drivers/net/ethernet/qualcomm/qca_spi.h
index d59cb2352cee..8f4808695e82 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.h
+++ b/drivers/net/ethernet/qualcomm/qca_spi.h
@@ -81,8 +81,7 @@ struct qcaspi {
struct qcafrm_handle frm_handle;
struct sk_buff *rx_skb;
- unsigned int intr_req;
- unsigned int intr_svc;
+ unsigned long intr;
u16 reset_count;
#ifdef CONFIG_DEBUG_FS
--
2.34.1
Powered by blists - more mailing lists