[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240610140219.2795167-3-ms@dev.tdt.de>
Date: Mon, 10 Jun 2024 16:02:09 +0200
From: Martin Schiller <ms@....tdt.de>
To: martin.blumenstingl@...glemail.com,
hauke@...ke-m.de,
andrew@...n.ch,
f.fainelli@...il.com,
olteanv@...il.com,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org
Cc: netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
ms@....tdt.de
Subject: [PATCH net-next v3 02/12] net: dsa: lantiq_gswip: Only allow phy-mode = "internal" on the CPU port
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Add the CPU port to gswip_xrx200_phylink_get_caps() and
gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus,
so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
---
drivers/net/dsa/lantiq_gswip.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index a557049e34f5..b9c7076ce32f 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1516,6 +1516,7 @@ static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
case 2:
case 3:
case 4:
+ case 6:
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
@@ -1547,6 +1548,7 @@ static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
case 2:
case 3:
case 4:
+ case 6:
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
--
2.39.2
Powered by blists - more mailing lists