lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <908c2e86-8255-4e76-8665-0b7d02853681@foss.st.com>
Date: Mon, 10 Jun 2024 09:55:05 +0200
From: Christophe ROULLIER <christophe.roullier@...s.st.com>
To: Marek Vasut <marex@...x.de>, "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
        Paolo
 Abeni <pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
        Krzysztof
 Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley
	<conor+dt@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre
 Torgue <alexandre.torgue@...s.st.com>,
        Richard Cochran
	<richardcochran@...il.com>,
        Jose Abreu <joabreu@...opsys.com>,
        Liam Girdwood
	<lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 09/12] ARM: dts: stm32: add ethernet1 and ethernet2
 support on stm32mp13

On 6/7/24 14:48, Marek Vasut wrote:
> On 6/7/24 11:57 AM, Christophe Roullier wrote:
>
> [...]
>
>> @@ -1505,6 +1511,38 @@ sdmmc2: mmc@...07000 {
>>                   status = "disabled";
>>               };
>>   +            ethernet1: ethernet@...0a000 {
>> +                compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
>> +                reg = <0x5800a000 0x2000>;
>> +                reg-names = "stmmaceth";
>> +                interrupts-extended = <&intc GIC_SPI 62 
>> IRQ_TYPE_LEVEL_HIGH>,
>> +                              <&exti 68 1>;
>> +                interrupt-names = "macirq", "eth_wake_irq";
>> +                clock-names = "stmmaceth",
>> +                          "mac-clk-tx",
>> +                          "mac-clk-rx",
>> +                          "ethstp",
>> +                          "eth-ck";
>> +                clocks = <&rcc ETH1MAC>,
>> +                     <&rcc ETH1TX>,
>> +                     <&rcc ETH1RX>,
>> +                     <&rcc ETH1STP>,
>> +                     <&rcc ETH1CK_K>;
>> +                st,syscon = <&syscfg 0x4 0xff0000>;
>> +                snps,mixed-burst;
>> +                snps,pbl = <2>;
>> +                snps,axi-config = <&stmmac_axi_config_1>;
>> +                snps,tso;
>> +                access-controllers = <&etzpc 48>;
>
> Keep the list sorted.

Hi Marek,

As already explained, all MP13 IPs have this property before "status". 
If we must move this property, we will do it later and do it for all IPs.

Thanks



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ