netdev - [PATCH net-next v2 07/12] net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in gswip_port_change

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240610115400.2759500-8-ms@dev.tdt.de>
Date: Mon, 10 Jun 2024 13:53:55 +0200
From: Martin Schiller <ms@....tdt.de>
To: martin.blumenstingl@...glemail.com,
	hauke@...ke-m.de,
	andrew@...n.ch,
	f.fainelli@...il.com,
	olteanv@...il.com,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org
Cc: netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	ms@....tdt.de
Subject: [PATCH net-next v2 07/12] net: dsa: lantiq_gswip: Use dsa_is_cpu_port() in gswip_port_change_mtu()

From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>

Make the check for the CPU port in gswip_port_change_mtu() consistent
with other areas of the driver by using dsa_is_cpu_port().

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
---
 drivers/net/dsa/lantiq_gswip.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 8ec329d0c136..58c069f964dd 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1464,12 +1464,11 @@ static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
 static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct gswip_priv *priv = ds->priv;
-	int cpu_port = priv->hw_info->cpu_port;
 
 	/* CPU port always has maximum mtu of user ports, so use it to set
 	 * switch frame size, including 8 byte special header.
 	 */
-	if (port == cpu_port) {
+	if (dsa_is_cpu_port(ds, port)) {
 		new_mtu += 8;
 		gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
 			       GSWIP_MAC_FLEN);
-- 
2.39.2