[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240611062753.12020-4-Raju.Lakkaraju@microchip.com>
Date: Tue, 11 Jun 2024 11:57:53 +0530
From: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>
To: <lkp@...el.com>
CC: <Raju.Lakkaraju@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
<andrew@...n.ch>, <bryan.whitehead@...rochip.com>, <davem@...emloft.net>,
<edumazet@...gle.com>, <hkallweit1@...il.com>, <hmehrtens@...linear.com>,
<kuba@...nel.org>, <linux-kernel@...r.kernel.org>, <linux@...linux.org.uk>,
<lxu@...linear.com>, <netdev@...r.kernel.org>,
<oe-kbuild-all@...ts.linux.dev>, <pabeni@...hat.com>, <sbauer@...ckbox.su>,
Wojciech Drewek <wojciech.drewek@...el.com>
Subject: [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init
When the system resumes from sleep, the phy_init_hw() function invokes
config_init(), which clears all interrupt masks and causes wake events to be
lost in subsequent wake sequences. Remove interrupt mask clearing from
config_init() and preserve relevant masks in config_intr().
Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>
Reported-by: kernel test robot <lkp@...el.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406052200.w3zuc32H-lkp@intel.com/
---
Change List:
------------
V0 -> V3:
- Address the https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@lunn.ch/T/
review comments
drivers/net/phy/mxl-gpy.c | 58 +++++++++++++++++++++++++--------------
1 file changed, 38 insertions(+), 20 deletions(-)
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index b2d36a3a96f1..e5f8ac4b4604 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -107,6 +107,7 @@ struct gpy_priv {
u8 fw_major;
u8 fw_minor;
+ u32 wolopts;
/* It takes 3 seconds to fully switch out of loopback mode before
* it can safely re-enter loopback mode. Record the time when
@@ -221,6 +222,15 @@ static int gpy_hwmon_register(struct phy_device *phydev)
}
#endif
+static int gpy_ack_interrupt(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Clear all pending interrupts */
+ ret = phy_read(phydev, PHY_ISTAT);
+ return ret < 0 ? ret : 0;
+}
+
static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
{
struct gpy_priv *priv = phydev->priv;
@@ -262,16 +272,8 @@ static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
static int gpy_config_init(struct phy_device *phydev)
{
- int ret;
-
- /* Mask all interrupts */
- ret = phy_write(phydev, PHY_IMASK, 0);
- if (ret)
- return ret;
-
- /* Clear all pending interrupts */
- ret = phy_read(phydev, PHY_ISTAT);
- return ret < 0 ? ret : 0;
+ /* Nothing to configure. Configuration Requirement Placeholder */
+ return 0;
}
static int gpy21x_config_init(struct phy_device *phydev)
@@ -627,11 +629,23 @@ static int gpy_read_status(struct phy_device *phydev)
static int gpy_config_intr(struct phy_device *phydev)
{
+ struct gpy_priv *priv = phydev->priv;
u16 mask = 0;
+ int ret;
+
+ ret = gpy_ack_interrupt(phydev);
+ if (ret)
+ return ret;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
mask = PHY_IMASK_MASK;
+ if (priv->wolopts & WAKE_MAGIC)
+ mask |= PHY_IMASK_WOL;
+
+ if (priv->wolopts & WAKE_PHY)
+ mask |= PHY_IMASK_LSTC;
+
return phy_write(phydev, PHY_IMASK, mask);
}
@@ -678,6 +692,7 @@ static int gpy_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct net_device *attach_dev = phydev->attached_dev;
+ struct gpy_priv *priv = phydev->priv;
int ret;
if (wol->wolopts & WAKE_MAGIC) {
@@ -725,6 +740,8 @@ static int gpy_set_wol(struct phy_device *phydev,
ret = phy_read(phydev, PHY_ISTAT);
if (ret < 0)
return ret;
+
+ priv->wolopts |= WAKE_MAGIC;
} else {
/* Disable magic packet matching */
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
@@ -732,6 +749,13 @@ static int gpy_set_wol(struct phy_device *phydev,
WOL_EN);
if (ret < 0)
return ret;
+
+ /* Disable the WOL interrupt */
+ ret = phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_WOL);
+ if (ret < 0)
+ return ret;
+
+ priv->wolopts &= ~WAKE_MAGIC;
}
if (wol->wolopts & WAKE_PHY) {
@@ -748,9 +772,11 @@ static int gpy_set_wol(struct phy_device *phydev,
if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
phy_trigger_machine(phydev);
+ priv->wolopts |= WAKE_PHY;
return 0;
}
+ priv->wolopts &= ~WAKE_PHY;
/* Disable the link state change interrupt */
return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
}
@@ -758,18 +784,10 @@ static int gpy_set_wol(struct phy_device *phydev,
static void gpy_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
- int ret;
+ struct gpy_priv *priv = phydev->priv;
wol->supported = WAKE_MAGIC | WAKE_PHY;
- wol->wolopts = 0;
-
- ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
- if (ret & WOL_EN)
- wol->wolopts |= WAKE_MAGIC;
-
- ret = phy_read(phydev, PHY_IMASK);
- if (ret & PHY_IMASK_LSTC)
- wol->wolopts |= WAKE_PHY;
+ wol->wolopts = priv->wolopts;
}
static int gpy_loopback(struct phy_device *phydev, bool enable)
--
2.34.1
Powered by blists - more mailing lists