[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fbf2be8d31579d1c9305fd961751fc6f0a4b4556.camel@redhat.com>
Date: Fri, 14 Jun 2024 10:18:47 +0200
From: Paolo Abeni <pabeni@...hat.com>
To: Marek BehĂșn <kabel@...nel.org>, Chris Packham
<Chris.Packham@...iedtelesis.co.nz>
Cc: "andrew@...n.ch" <andrew@...n.ch>, "hkallweit1@...il.com"
<hkallweit1@...il.com>, "linux@...linux.org.uk" <linux@...linux.org.uk>,
"davem@...emloft.net" <davem@...emloft.net>, "edumazet@...gle.com"
<edumazet@...gle.com>, "kuba@...nel.org" <kuba@...nel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"ericwouds@...il.com" <ericwouds@...il.com>
Subject: Re: [PATCH next-next] net: phy: realtek: add support for rtl8224
2.5Gbps PHY
On Wed, 2024-06-12 at 09:07 +0200, Marek BehĂșn wrote:
> On Tue, 11 Jun 2024 20:42:43 +0000
> Chris Packham <Chris.Packham@...iedtelesis.co.nz> wrote:
>
> > +cc Eric W and Marek.
> >
> > On 11/06/24 17:34, Chris Packham wrote:
> > > The Realtek RTL8224 PHY is a 2.5Gbps capable PHY. It only uses the
> > > clause 45 MDIO interface and can leverage the support that has already
> > > been added for the other 822x PHYs.
> > >
> > > Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
> > > ---
> > >
> > > Notes:
> > > I'm currently testing this on an older kernel because the board I'm
> > > using has a SOC/DSA switch that has a driver in openwrt for Linux 5.15.
> > > I have tried to selectively back port the bits I need from the other
> > > rtl822x work so this should be all that is required for the rtl8224.
> > >
> > > There's quite a lot that would need forward porting get a working system
> > > against a current kernel so hopefully this is small enough that it can
> > > land while I'm trying to figure out how to untangle all the other bits.
> > >
> > > One thing that may appear lacking is the lack of rate_matching support.
> > > According to the documentation I have know the interface used on the
> > > RTL8224 is (q)uxsgmii so no rate matching is required. As I'm still
> > > trying to get things completely working that may change if I get new
> > > information.
> > >
> > > drivers/net/phy/realtek.c | 8 ++++++++
> > > 1 file changed, 8 insertions(+)
> > >
> > > diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> > > index 7ab41f95dae5..2174893c974f 100644
> > > --- a/drivers/net/phy/realtek.c
> > > +++ b/drivers/net/phy/realtek.c
> > > @@ -1317,6 +1317,14 @@ static struct phy_driver realtek_drvs[] = {
> > > .resume = rtlgen_resume,
> > > .read_page = rtl821x_read_page,
> > > .write_page = rtl821x_write_page,
> > > + }, {
> > > + PHY_ID_MATCH_EXACT(0x001ccad0),
> > > + .name = "RTL8224 2.5Gbps PHY",
> > > + .get_features = rtl822x_c45_get_features,
> > > + .config_aneg = rtl822x_c45_config_aneg,
> > > + .read_status = rtl822x_c45_read_status,
> > > + .suspend = genphy_c45_pma_suspend,
> > > + .resume = rtlgen_c45_resume,
> > > }, {
> > > PHY_ID_MATCH_EXACT(0x001cc961),
> > > .name = "RTL8366RB Gigabit Ethernet"
>
> Don't you need rtl822xb_config_init for serdes configuration?
Marek, I read the above as you would prefer to have such support
included from the beginning, as such I'm looking forward a new version
of this patch.
Please raise a hand if I read too much in your reply.
Thanks!
Paolo
Powered by blists - more mailing lists