[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Zm26aJaz7Z7LAXNT@pengutronix.de>
Date: Sat, 15 Jun 2024 17:59:36 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Kory Maincent <kory.maincent@...tlin.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Donald Hunter <donald.hunter@...il.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Dent Project <dentproject@...uxfoundation.org>,
kernel@...gutronix.de
Subject: Re: [PATCH net-next v3 5/7] net: ethtool: Add new power limit get
and set features
Hi Köry,
On Fri, Jun 14, 2024 at 04:33:21PM +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@...tlin.com>
>
> This patch expands the status information provided by ethtool for PSE c33
> with power limit. It also adds a call to pse_ethtool_set_pw_limit() to
> configure the PSE control power limit.
>
> Signed-off-by: Kory Maincent <kory.maincent@...tlin.com>
> ---
>
> Change in v3:
> - Add ethtool netlink documentation.
> ---
> Documentation/networking/ethtool-netlink.rst | 8 ++++++
> include/uapi/linux/ethtool_netlink.h | 1 +
> net/ethtool/pse-pd.c | 42 +++++++++++++++++++++++-----
> 3 files changed, 44 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
> index 7dbf2ef3ac0e..a78b6aea84af 100644
> --- a/Documentation/networking/ethtool-netlink.rst
> +++ b/Documentation/networking/ethtool-netlink.rst
> @@ -1737,6 +1737,7 @@ Kernel response contents:
> PoE PSE.
> ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` u32 power extended substatus of
> the PoE PSE.
> + ``ETHTOOL_A_C33_PSE_PW_LIMIT`` u32 power limit of the PoE PSE.
> ====================================== ====== =============================
>
> When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
> @@ -1799,6 +1800,9 @@ Possible values are:
> ethtool_c33_pse_ext_substate_power_not_available
> ethtool_c33_pse_ext_substate_short_detected
>
> +When set, the optional ``ETHTOOL_A_C33_PSE_PW_LIMIT`` attribute identifies
> +the C33 PSE power limit in mW.
> +
> PSE_SET
> =======
>
> @@ -1810,6 +1814,7 @@ Request contents:
> ``ETHTOOL_A_PSE_HEADER`` nested request header
> ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state
> ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state
> + ``ETHTOOL_A_C33_PSE_PW_LIMIT`` u32 Control PoE PSE power limit
> ====================================== ====== =============================
>
> When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
> @@ -1820,6 +1825,9 @@ to control PoDL PSE Admin functions. This option is implementing
> The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing
> ``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl.
>
> +When set, the optional ``ETHTOOL_A_C33_PSE_PW_LIMIT`` attribute is used
> +to control C33 PSE power limit in mW.
The corresponding name int the IEEE 802.3-2022 seems to be pse_avail_pwr
in 145.2.5.4 Variables and pse_available_power in 33.2.4.4 Variables.
This variable is using classes instead of mW. pd692x0 seems to use
classes instead of mW too. May be it is better to use classes for UAPI
too?
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists