netdev - [PATCH] net: usb: ax88179_178a: improve reset check

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240617102839.654316-1-jtornosm@redhat.com>
Date: Mon, 17 Jun 2024 12:28:21 +0200
From: Jose Ignacio Tornos Martinez <jtornosm@...hat.com>
To: davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	horms@...nel.org,
	linux-usb@...r.kernel.org,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: jtornosm@...hat.com,
	stable@...r.kernel.org,
	Yongqin Liu <yongqin.liu@...aro.org>,
	Antje Miederhöfer <a.miederhoefer@....de>,
	Arne Fitzenreiter <arne_f@...ire.org>
Subject: [PATCH] net: usb: ax88179_178a: improve reset check

After ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is
set to down/up") to not reset from usbnet_open after the reset from
usbnet_probe at initialization stage to speed up this, some issues have
been reported.

It seems to happen that if the initialization is slower, and some time
passes between the probe operation and the open operation, the second reset
from open is necessary too to have the device working. The reason is that
if there is no activity with the phy, this is "disconnected".

In order to improve this, the solution is to detect when the phy is
"disconnected", and we can use the phy status register for this. So we will
only reset the device from reset operation in this situation, that is, only
if necessary.

The same bahavior is happening when the device is stopped (link set to
down) and later is restarted (link set to up), so if the phy keeps working
we only need to enable the mac again, but if enough time passes between the
device stop and restart, reset is necessary, and we can detect the
situation checking the phy status register too.

cc: stable@...r.kernel.org # 6.6+
Fixes: ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up")
Reported-by: Yongqin Liu <yongqin.liu@...aro.org>
Reported-by: Antje Miederhöfer <a.miederhoefer@....de>
Reported-by: Arne Fitzenreiter <arne_f@...ire.org>
Tested-by: Yongqin Liu <yongqin.liu@...aro.org>
Tested-by: Antje Miederhöfer <a.miederhoefer@....de>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@...hat.com>
---
 drivers/net/usb/ax88179_178a.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 51c295e1e823..c2fb736f78b2 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -174,7 +174,6 @@ struct ax88179_data {
 	u32 wol_supported;
 	u32 wolopts;
 	u8 disconnecting;
-	u8 initialized;
 };

 struct ax88179_int_data {
@@ -1678,12 +1677,21 @@ static int ax88179_reset(struct usbnet *dev)

 static int ax88179_net_reset(struct usbnet *dev)
 {
-	struct ax88179_data *ax179_data = dev->driver_priv;
+	u16 tmp16;

-	if (ax179_data->initialized)
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID, GMII_PHY_PHYSR,
+			 2, &tmp16);
+	if (tmp16) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				 2, 2, &tmp16);
+		if (!(tmp16 & AX_MEDIUM_RECEIVE_EN)) {
+			tmp16 |= AX_MEDIUM_RECEIVE_EN;
+			ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+					  2, 2, &tmp16);
+		}
+	} else {
 		ax88179_reset(dev);
-	else
-		ax179_data->initialized = 1;
+	}

 	return 0;
 }
-- 
2.45.1