| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240619170537.2846-6-pablo@netfilter.org>
Date: Wed, 19 Jun 2024 19:05:37 +0200
From: Pablo Neira Ayuso <pablo@...filter.org>
To: netfilter-devel@...r.kernel.org
Cc: davem@...emloft.net,
netdev@...r.kernel.org,
kuba@...nel.org,
pabeni@...hat.com,
edumazet@...gle.com,
fw@...len.de
Subject: [PATCH net 5/5] selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
From: Jianguo Wu <wujianguo@...natelecom.cn>
this selftest is designed for evaluating the SRv6 End.DX6 behavior
used with netfilter(rpfilter), in this example, for implementing
IPv6 L3 VPN use cases.
Signed-off-by: Jianguo Wu <wujianguo@...natelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@...filter.org>
---
tools/testing/selftests/net/Makefile | 1 +
tools/testing/selftests/net/config | 1 +
.../net/srv6_end_dx6_netfilter_test.sh | 340 ++++++++++++++++++
3 files changed, 342 insertions(+)
create mode 100755 tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 7a5f7dd320de..d9393569d03a 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -44,6 +44,7 @@ TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh
TEST_PROGS += srv6_end_x_next_csid_l3vpn_test.sh
TEST_PROGS += srv6_end_flavors_test.sh
TEST_PROGS += srv6_end_dx4_netfilter_test.sh
+TEST_PROGS += srv6_end_dx6_netfilter_test.sh
TEST_PROGS += vrf_strict_mode_test.sh
TEST_PROGS += arp_ndisc_evict_nocarrier.sh
TEST_PROGS += ndisc_unsolicited_na_test.sh
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index c2766e558f92..d4891f7a2bfa 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -102,3 +102,4 @@ CONFIG_CRYPTO_ARIA=y
CONFIG_XFRM_INTERFACE=m
CONFIG_XFRM_USER=m
CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
diff --git a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
new file mode 100755
index 000000000000..9e69a2ed5bc3
--- /dev/null
+++ b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
@@ -0,0 +1,340 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# author: Jianguo Wu <wujianguo@...natelecom.cn>
+#
+# Mostly copied from tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh.
+#
+# This script is designed for testing the support of netfilter hooks for
+# SRv6 End.DX4 behavior.
+#
+# Hereafter a network diagram is shown, where one tenants (named 100) offer
+# IPv6 L3 VPN services allowing hosts to communicate with each other across
+# an IPv6 network.
+#
+# Routers rt-1 and rt-2 implement IPv6 L3 VPN services leveraging the SRv6
+# architecture. The key components for such VPNs are: a) SRv6 Encap behavior,
+# b) SRv6 End.DX4 behavior.
+#
+# To explain how an IPv6 L3 VPN based on SRv6 works, let us briefly consider an
+# example where, within the same domain of tenant 100, the host hs-1 pings
+# the host hs-2.
+#
+# First of all, L2 reachability of the host hs-2 is taken into account by
+# the router rt-1 which acts as an arp proxy.
+#
+# When the host hs-1 sends an IPv6 packet destined to hs-2, the router rt-1
+# receives the packet on the internal veth-t100 interface, rt-1 contains the
+# SRv6 Encap route for encapsulating the IPv6 packet in a IPv6 plus the Segment
+# Routing Header (SRH) packet. This packet is sent through the (IPv6) core
+# network up to the router rt-2 that receives it on veth0 interface.
+#
+# The rt-2 router uses the 'localsid' routing table to process incoming
+# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these
+# packets, the SRv6 End.DX4 behavior removes the outer IPv6+SRH headers and
+# routs the packet to the specified nexthop. Afterwards, the packet is sent to
+# the host hs-2 through the veth-t100 interface.
+#
+# The ping response follows the same processing but this time the role of rt-1
+# and rt-2 are swapped.
+#
+# And when net.netfilter.nf_hooks_lwtunnel is set to 1 in rt-1 or rt-2, and a
+# rpfilter iptables rule is added, SRv6 packets will go through netfilter PREROUTING
+# hooks.
+#
+#
+# +-------------------+ +-------------------+
+# | | | |
+# | hs-1 netns | | hs-2 netns |
+# | | | |
+# | +-------------+ | | +-------------+ |
+# | | veth0 | | | | veth0 | |
+# | | cafe::1/64 | | | | cafe::2/64 | |
+# | +-------------+ | | +-------------+ |
+# | . | | . |
+# +-------------------+ +-------------------+
+# . .
+# . .
+# . .
+# +-----------------------------------+ +-----------------------------------+
+# | . | | . |
+# | +---------------+ | | +---------------- |
+# | | veth-t100 | | | | veth-t100 | |
+# | | cafe::11/64 | +----------+ | | +----------+ | cafe::22/64 | |
+# | +-------+-------+ | route | | | | route | +-------+-------- |
+# | | table | | | | table | |
+# | +----------+ | | +----------+ |
+# | +--------------+ | | +--------------+ |
+# | | veth0 | | | | veth0 | |
+# | | 2001:11::1/64 |.|...|.| 2001:11::2/64 | |
+# | +--------------+ | | +--------------+ |
+# | | | |
+# | rt-1 netns | | rt-2 netns |
+# | | | |
+# +-----------------------------------+ +-----------------------------------+
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+# | Network configuration |
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# rt-1: localsid table
+# +----------------------------------------------------------------+
+# |SID |Action |
+# +----------------------------------------------------------------+
+# |fc00:21:100::6004|apply SRv6 End.DX6 nh6 cafe::1 dev veth-t100 |
+# +----------------------------------------------------------------+
+#
+# rt-1: route table
+# +---------------------------------------------------+
+# |host |Action |
+# +---------------------------------------------------+
+# |cafe::2 |apply seg6 encap segs fc00:12:100::6004|
+# +---------------------------------------------------+
+# |cafe::/64 |forward to dev veth_t100 |
+# +---------------------------------------------------+
+#
+#
+# rt-2: localsid table
+# +---------------------------------------------------------------+
+# |SID |Action |
+# +---------------------------------------------------------------+
+# |fc00:12:100::6004|apply SRv6 End.DX6 nh6 cafe::2 dev veth-t100 |
+# +---------------------------------------------------------------+
+#
+# rt-2: route table
+# +---------------------------------------------------+
+# |host |Action |
+# +---------------------------------------------------+
+# |cafe::1 |apply seg6 encap segs fc00:21:100::6004|
+# +---------------------------------------------------+
+# |cafe::/64 |forward to dev veth_t100 |
+# +---------------------------------------------------+
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+readonly IPv6_RT_NETWORK=2001:11
+readonly IPv6_HS_NETWORK=cafe
+readonly SID_LOCATOR=fc00
+
+PING_TIMEOUT_SEC=4
+
+ret=0
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ nsuccess=$((nsuccess+1))
+ printf "\n TEST: %-60s [ OK ]\n" "${msg}"
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "\n TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+}
+
+print_log_test_results()
+{
+ if [ "$TESTS" != "none" ]; then
+ printf "\nTests passed: %3d\n" ${nsuccess}
+ printf "Tests failed: %3d\n" ${nfail}
+ fi
+}
+
+log_section()
+{
+ echo
+ echo "################################################################################"
+ echo "TEST SECTION: $*"
+ echo "################################################################################"
+}
+
+cleanup()
+{
+ ip link del veth-rt-1 2>/dev/null || true
+ ip link del veth-rt-2 2>/dev/null || true
+
+ # destroy routers rt-* and hosts hs-*
+ for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do
+ ip netns del ${ns} || true
+ done
+}
+
+# Setup the basic networking for the routers
+setup_rt_networking()
+{
+ local rt=$1
+ local nsname=rt-${rt}
+
+ ip netns add ${nsname}
+
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+ ip link set veth-rt-${rt} netns ${nsname}
+ ip -netns ${nsname} link set veth-rt-${rt} name veth0
+
+ ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad
+ ip -netns ${nsname} link set veth0 up
+ ip -netns ${nsname} link set lo up
+
+ ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.forwarding=1
+}
+
+setup_rt_netfilter()
+{
+ local rt=$1
+ local nsname=rt-${rt}
+
+ ip netns exec ${nsname} sysctl -wq net.netfilter.nf_hooks_lwtunnel=1
+ ip netns exec ${nsname} ip6tables -t raw -A PREROUTING -m rpfilter --invert -j DROP
+}
+
+setup_hs()
+{
+ local hs=$1
+ local rt=$2
+ local tid=$3
+ local hsname=hs-${hs}
+ local rtname=rt-${rt}
+ local rtveth=veth-t${tid}
+
+ # set the networking for the host
+ ip netns add ${hsname}
+
+ ip -netns ${hsname} link add veth0 type veth peer name ${rtveth}
+ ip -netns ${hsname} link set ${rtveth} netns ${rtname}
+ ip -netns ${hsname} addr add ${IPv6_HS_NETWORK}::${hs}/64 dev veth0 nodad
+ ip -netns ${hsname} link set veth0 up
+ ip -netns ${hsname} link set lo up
+
+ ip -netns ${rtname} addr add ${IPv6_HS_NETWORK}::${rt}${hs}/64 dev ${rtveth}
+ ip -netns ${rtname} link set ${rtveth} up
+
+ ip netns exec ${rtname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${rtname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+ ip netns exec ${rtname} sysctl -wq net.ipv6.conf.${rtveth}.proxy_ndp=1
+}
+
+setup_vpn_config()
+{
+ local hssrc=$1
+ local rtsrc=$2
+ local hsdst=$3
+ local rtdst=$4
+ local tid=$5
+
+ local hssrc_name=hs-t${tid}-${hssrc}
+ local hsdst_name=hs-t${tid}-${hsdst}
+ local rtsrc_name=rt-${rtsrc}
+ local rtdst_name=rt-${rtdst}
+ local rtveth=veth-t${tid}
+ local vpn_sid=${SID_LOCATOR}:${hssrc}${hsdst}:${tid}::6004
+
+ ip -netns ${rtsrc_name} -6 neigh add proxy ${IPv6_HS_NETWORK}::${hsdst} dev ${rtveth}
+
+ # set the encap route for encapsulating packets which arrive from the
+ # host hssrc and destined to the access router rtsrc.
+ ip -netns ${rtsrc_name} -6 route add ${IPv6_HS_NETWORK}::${hsdst}/128 \
+ encap seg6 mode encap segs ${vpn_sid} dev veth0
+ ip -netns ${rtsrc_name} -6 route add ${vpn_sid}/128 \
+ via 2001:11::${rtdst} dev veth0
+
+ # set the decap route for decapsulating packets which arrive from
+ # the rtdst router and destined to the hsdst host.
+ ip -netns ${rtdst_name} -6 route add ${vpn_sid}/128 \
+ encap seg6local action End.DX6 nh6 ${IPv6_HS_NETWORK}::${hsdst} dev veth-t${tid}
+}
+
+setup()
+{
+ ip link add veth-rt-1 type veth peer name veth-rt-2
+ # setup the networking for router rt-1 and router rt-2
+ setup_rt_networking 1
+ setup_rt_networking 2
+
+ # setup two hosts for the tenant 100.
+ # - host hs-1 is directly connected to the router rt-1;
+ # - host hs-2 is directly connected to the router rt-2.
+ setup_hs 1 1 100
+ setup_hs 2 2 100
+
+ # setup the IPv4 L3 VPN which connects the host hs-1 and host hs-2.
+ setup_vpn_config 1 1 2 2 100 #args: src_host src_router dst_host dst_router tenant
+ setup_vpn_config 2 2 1 1 100
+}
+
+check_hs_connectivity()
+{
+ local hssrc=$1
+ local hsdst=$2
+ local tid=$3
+
+ ip netns exec hs-${hssrc} ping -6 -c 1 -W ${PING_TIMEOUT_SEC} \
+ ${IPv6_HS_NETWORK}::${hsdst} >/dev/null 2>&1
+}
+
+check_and_log_hs_connectivity()
+{
+ local hssrc=$1
+ local hsdst=$2
+ local tid=$3
+
+ check_hs_connectivity ${hssrc} ${hsdst} ${tid}
+ log_test $? 0 "Hosts connectivity: hs-${hssrc} -> hs-${hsdst} (tenant ${tid})"
+}
+
+host_tests()
+{
+ log_section "SRv6 VPN connectivity test among hosts in the same tenant"
+
+ check_and_log_hs_connectivity 1 2 100
+ check_and_log_hs_connectivity 2 1 100
+}
+
+router_netfilter_tests()
+{
+ log_section "SRv6 VPN connectivity test with netfilter enabled in routers"
+ setup_rt_netfilter 1
+ setup_rt_netfilter 2
+
+ check_and_log_hs_connectivity 1 2 100
+ check_and_log_hs_connectivity 2 1 100
+}
+
+if [ "$(id -u)" -ne 0 ];then
+ echo "SKIP: Need root privileges"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+cleanup &>/dev/null
+
+setup
+
+host_tests
+router_netfilter_tests
+
+print_log_test_results
+
+cleanup &>/dev/null
+
+exit ${ret}
--
2.30.2
Powered by blists - more mailing lists